The Look Ahead Tie Dye T-Shirt features a premium, allover earth-toned tie dye and retro logo graphics at the left chest and back. This short sleeve t-shirt is made with heavier weight 100% carded ringspun cotton. Fit type: slim.
100% combed cotton T-shirt with Doomed printed design. Pre-shrunk to minimise shrinkage.
100% combed cotton T-shirt with Doomed printed design. Pre-shrunk to minimise shrinkage.
100% combed cotton T-shirt with Doomed printed design. Pre-shrunk to minimise shrinkage.
LOOK KEO 2 MAX CARBON PEDALS WITH KEO GRIP CLEAT RIDE AT YOUR BEST THE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS. The LOOK design team has completely remodelled the shape of the KEO 2 MAX giving it a new slimmed down line yet a wider contact surface increasing its style and efficiency. TECHNOLOGIES OPTIMIZED CONTACT SURFACE The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep regardless of the position of your foot (depending upon the angular float you use) the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface without any additional weight gain improves the Power to Weight ratio making the product even better and allowing you to perform at your best. IMPROVED SPINDLE PROFILE The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle it is composed of an axle with an inner ball bearing and a needle roller bearing located under the contact surface to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer previously used to hold the needle roller bearing in place has been replaced with a conical spacer. This technical solution reduces friction increases fluidity and by consequence decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. SPECIFICATIONSUSAGE: Recreational to CompetitionBODY: CarbonAXLE: Chromoly +PEDAL STACK HEIGHT + CLEATS: 173 mmCONTACT SURFACE AREA: 500 mm²FLOAT: 8 or 12 adjustable springCLEATS: Kéo Grip CleatsPEDAL WEIGHT: 125 gr (312 gr per pair with cleats and screws)COLOURS: BlackACCESSORIES: A pair of Grey Kéo Grip cleats + screwsGUARANTY: 2 years
The X-TRACK EN-RAGE PLUS pedal body is made of forged aluminium. It has a 67 mm wide platform for a 664 mm ² of contact surface. This provides improved stability and support especially at high speed. The pins and ribbed pedal body ensure good grip in all circumstances even when not clipped in. The X-TRACK EN-RAGE PLUS model is perfectly suited to the requirements of the ENDURO rider. Expanding the X-TRACK range. Designed to meet the specific requirements of TRAIL / ENDURO riders : A pedal platform designed to be compatible with market leading shoes. Pins that offer adjustable maximum grip. Clip-in and clip-out made easier thanks to a wide easy to find platform. Built to last a purpose built robust pedal
Designed to win the new KEO BLADE CARBON improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to the daily input from the greatest of champions. Lightweight aerodynamic powerful the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours. Technology: BLADE CARBONTention: 12 or 16 or 20Body: CARBONSpindle: CHROMOLY +Platform Material: STAINLESS STEEL / INOXPlatform Area: 700mm²Platform Width: 67mmStack Height + Cleats: 148mmWeight Pedal: 110gWeight Pair + Cleat: 288g
EXTREME SCUFFLE Bringing tentacles to a fistfight is a sure way to whoop some ass!!! You're outnumbered!!! Outmuscled!!! Your fists mean nothing here human!!! Bring your best fighter and watch them get drop-kicked with ease!!! Wooooooo!!!!! Look Ma No Hands!!!! Features No Slip: We use a special grip coating and temple grips to construct our frame to help eliminate slippage when your lava-induced sweat pops while volcano surfing. No Bounce: Our frame is fitted and lightweight with a removable nose-piece and two sizing options to prevent bouncing when you land on your motorcycle seat after diving out of a helicopter. Anti-Fog: Extremely effective anti-fog coating prevents the inside of this extreme wraparound lens from fogging even with the extremest sweat. All Polarised: glare-reducing polarised lenses and UV400 protection that blocks those harmful UVA and UVB rays. All Fun: YOU MIGHT BE AN EXTREME ATHLETE YOU MIGHT BE A PRETTY AVERAGE ATHLETE WHO IS EXTREMELY DELUSIONAL. BOTH EXTREMELY EXTREME EXTREMISTS YEAHHHHHAHARGHHHHHWOOOOOHOOOOOOO
Lock into any Giant or Look road pedal with 4.5 degree of float to allow for some movement during the pedal stroke. Includes memory position for seperate front and rear cleat.
FEEL THE NEW X-PERIENCELOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism is resistant to the negative effects of coming into contact with various external factors (rocks roots mud…) and provides consistent and reliable performance over time. Its spindle equipped with a double weather-resistant seal has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride and therefore more fun. TECHNOLOGYTHE BEST POWER TO WEIGHT RATIO All the energy you produce is transferred to your MTB through your pedals. Their role is therefore crucial. LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product. Generally speaking the greater the contact surface the more efficiently energy is transferred. On the other hand the greater the contact surface the more the pedal will weigh. The challenge faced by our engineers was therefore to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market. LATERAL CONTACT SUPPORT Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support. MECHANISM GEOMETRY The mechanism works regardless of external conditions (in the mud forces are significantly different from those encountered when dry) more space allows for the shedding of various foreign matter (mud sand…). These zones give the user a constant and stable feeling of being securely clipped in in all conditions. ADJUSTABLE TENSION An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level. FEATURES USE: XC Competition and LeisureTENSION: 6 to 14BODY: AluminiumSPINDLE: Chromoly +FLOAT: 6°PLATFORM MATERIAL: ChromolyPLATFORM AREA: 350 mm²PLATFORM WIDTH: 57 mmSTACK HEIGHT + CLEATS: 168 mm (107 + 61 mm)WEIGHT PEDAL: 195 gWEIGHT PAIR + CLEATS: 494 gGUARANTY: 2 years
LOOK KEO 2 MAX PEDALS WITH KEO GRIP CLEAT RIDE AT YOUR BEST THE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS. The LOOK design team has completely remodelled the shape of the KEO 2 MAX giving it a new slimmed down line yet a wider contact surface increasing its style and efficiency. TECHNOLOGIES OPTIMIZED CONTACT SURFACE The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep regardless of the position of your foot (depending upon the angular float you use) the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface without any additional weight gain improves the Power to Weight ratio making the product even better and allowing you to perform at your best. IMPROVED SPINDLE PROFILE The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle it is composed of an axle with an inner ball bearing and a needle roller bearing located under the contact surface to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer previously used to hold the needle roller bearing in place has been replaced with a conical spacer. This technical solution reduces friction increases fluidity and by consequence decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. SPECIFICATIONSUSAGE: Recreational to CompetitionBODY: CompositeAXLE: Chromoly +PEDAL STACK HEIGHT + CLEATS: 173 mmCONTACT SURFACE AREA: 500 mm²FLOAT: 8 or 12 adjustable springCLEATS: Kéo Grip CleatsPEDAL WEIGHT: 130 gr (328 gr per pair with cleats and screws)COLOURS: Black or WhiteACCESSORIES: A pair of Grey Kéo Grip cleats + screwsGUARANTY: 2 years
What is the difference between a KEO CLASSIC 3 and a KEO CLASSIC 3 PLUS? The material used for the contact area. The little extra stainless steel rather than composite optimizes pedal stiffness and hence the transfer of power from you to your bike. As for the rest we stick to what works: fast clip in / clip out and easy tension adjustment. WHY YOU'LL LOVE IT?THAT LITTLE EXTRA WHEN IT COMES TO STIFFNESS Large wide contact area for excellent stability thru the pedal stroke A total weight of 350 grams all included All of LOOK's expertise at an affordable price SPINDLESpindle material: Chromoly BODY & PLATFORMTechnology: SpringBody material: CompositePlatform material: Stainless steelPlatform area: 400 mm²Platform width: 60 mm RETENSION & CLEATSRetention: 8 to 12Cleats: KEO GRIP WEIGHT & ACCESSORIESWeight Pedal: 140 grWeight pair + cleats: 350 grStack height + cleats: 178 mm