Tool for removing axle on older and current Look road pedals.
The Keo Blade 2 is manufactured from a composite material and injected with glass fibres to aid in smoother engaging of the pedal.
Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out. Its large and wide contact surface provides excellent pedalling stability. The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal and an eccentric rotation (creating a shock on each rotation). This test is far more gruelling to the current industry standard, the EN14781. The new classic two has 400 mm² surface area which is almost 40% more than the competition. The significance of this is the load is spread around the cleat rather than having a small concentrated area, which improves comfort and reduced foot discomfort.
Whether you're riding for the fun of it or pushing for the top spot on the podium, the Look Keo 2 Max Carbon pedals give you the best of both worlds with a slim profile and incredible support from the large contact area that translates into superior comfort and maximum power transfer. Technologies: Optimised Surface Contact: The Look Keo 2 Max Carbon pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max Carbon pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max Carbon pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. Alternative Cleat Float Options: Black Cleats: 0 degrees; Red Cleats: 9 degrees (both alternative versions sold separately)
Look has optimised the pedal shape and size to obtain the perfect balance between the contact surface area and weight. This pedal features an exceptional, modern and performance-orientated design that provides superb comfort and as it is equipped with advanced weather seals; it is extremely durable and reliable. To expand the usage of the Look X-Track pedals further, they have fully adjustable cleat tension, enabling you to fine-tune the contact and release feel and to set them up to suit how you like to ride. Please Note: These pedals come with Look SPD-style cleats to install onto your SPD-compatible cycling shoes. However, if you wish to use them with shoes that have Shimano SPD cleats installed they will be compatible with these too.
Look has optimised the pedal shape and size to obtain the perfect balance between the contact surface area and weight. This pedal features an exceptionally, modern and performance orientated design that provides superb comfort and as it is equipped with advanced weather seals; it is extremely durable and reliable. To expand this pedal design usage further, it has fully adjustable cleat tension, enabling you to fine-tune the contact and release feel and to set them up to suit how you like to ride.
Combining a carbon body with a titanium axle, each of these cleat-ready pedals provide a sturdy base for heavy-duty, varied terrain riding. Built to resist impact from rocks and dirt thrown up from the trail floor, these lightweight and smooth-spinning platforms have a specially designed shape and build to ensure the best power-to-weight ratio possible. Suited to the rigours of XC racing, this is the perfect pair for fast-paced and thrilling riding.
Durably designed and comprising of a forged aluminium body and CrMo + spindle, these strong pedals are well weighted, happily reducing your efforts as you make your way through every trail and over every terrain. Equipped with a superbly efficient cleat engagement system, you can ride with confidence and composure as you search for your next Enduro-based adrenaline hit. With a wide platform to aid balance and manoeuvrability, these pedals more than meet the demands of the modern thrill seeker.
Look has optimised the pedal shape and size to obtain the perfect balance between the contact surface area and weight. This pedal features an exceptionally, modern and performance orientated design that provides superb comfort and as it is equipped with advanced weather seals; it is extremely durable and reliable. To expand this pedal design usage further, it has fully adjustable cleat tension, enabling you to fine-tune the contact and release feel and to set them up to suit how you like to ride.
Whether you're riding for the joy of it or pushing for the top spot on the podium, you get the best of both worlds with a slim profile and incredible support from the large contact area that translates into superior comfort and maximum power transfer. Technologies: Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.
The Trail Roc Fusion pedals give you superior control of your mountain bike and far greater performance than traditional flat pedals. Their wide composite platform offers increased stability, better power transmission and ultimate comfort, allowing you to pedal with confidence and get the most out of your ride. And worry no longer when the trail gets technical: each pedal face features eight replaceable pins for maximum grip. Customize your look with one of the 5 available colours and forget your limits out on the trail!A wide platform pedal that offers a secure foothold and improved stability for improved control when ridingThe perfect upgrade for your mountain bike: wider (25%), more stable and more grip than a classic or OEM pedalA lightweight composite body with 8 replaceable pins for maximum comfort and grip5 available colours to express your personality: lime green, ice blue, red or purple to colour your ride, black to keep it understatedInfused with Look craftsmanship and Made in France qualityIncredible Grip! - The 8 replaceable pins offer optimal grip and traction whilst ensuring ultimate comfort and ease of use when pedalling. The concave design of the platform and its reduced profile height (just 18mm) give you the utmost efficiency and confidence as you lean into bends.Ride With Confidence - The Trail Fusion's wide composite platform provides excellent stability and control, even if your foot is not perfectly placed in the centre of the pedal. It offers a 25% greater contact area than traditional pedals, immediately giving you more confidence on technical sections and better control through curves.Simple Yet Stylish - With a sleek design and 5 colours to choose from, the Trail Fusion pedals make matching and styling your kit and bike child s play. Choose your perfect colour and enjoy the ride!Built To Last - The Trail Fusion pedals are Made in France and designed to last. Their straightforward yet advanced design comes with a promise of reliability thanks to quality components that can easily be replaced when necessary to increase the lifespan of your pedals.French Savoir-Faire - From design to production, our Trail Fusion pedal is Made in France in our very own workshops in Nevers. The development process included several prototypes as well as numerous lab and field tests, illustrating the full extent of Look Cycle s R&D expertise. Our commitment to pushing our products beyond current norms and market standards ensures we deliver uncompromising quality, performance, and design.Specifications:Spindle material: Chromoly +Body material: CompositeQ Factor: 61.5mmGrip: 8 Metal Pins Per SideTechnology: Flat PedalsPlatform area: 107x105mmProfile: 18mmPedal: 162gWeight pair: 324g
The Trail Roc Fusion pedals give you superior control of your mountain bike and far greater performance than traditional flat pedals. Their wide composite platform offers increased stability, better power transmission and ultimate comfort, allowing you to pedal with confidence and get the most out of your ride. And worry no longer when the trail gets technical: each pedal face features eight replaceable pins for maximum grip. Customize your look with one of the 5 available colours and forget your limits out on the trail!A wide platform pedal that offers a secure foothold and improved stability for improved control when ridingThe perfect upgrade for your mountain bike: wider (25%), more stable and more grip than a classic or OEM pedalA lightweight composite body with 8 replaceable pins for maximum comfort and grip5 available colours to express your personality: lime green, ice blue, red or purple to colour your ride, black to keep it understatedInfused with Look craftsmanship and Made in France qualityIncredible Grip! - The 8 replaceable pins offer optimal grip and traction whilst ensuring ultimate comfort and ease of use when pedalling. The concave design of the platform and its reduced profile height (just 18mm) give you the utmost efficiency and confidence as you lean into bends.Ride With Confidence - The Trail Fusion's wide composite platform provides excellent stability and control, even if your foot is not perfectly placed in the centre of the pedal. It offers a 25% greater contact area than traditional pedals, immediately giving you more confidence on technical sections and better control through curves.Simple Yet Stylish - With a sleek design and 5 colours to choose from, the Trail Fusion pedals make matching and styling your kit and bike child s play. Choose your perfect colour and enjoy the ride!Built To Last - The Trail Fusion pedals are Made in France and designed to last. Their straightforward yet advanced design comes with a promise of reliability thanks to quality components that can easily be replaced when necessary to increase the lifespan of your pedals.French Savoir-Faire - From design to production, our Trail Fusion pedal is Made in France in our very own workshops in Nevers. The development process included several prototypes as well as numerous lab and field tests, illustrating the full extent of Look Cycle s R&D expertise. Our commitment to pushing our products beyond current norms and market standards ensures we deliver uncompromising quality, performance, and design.Specifications:Spindle material: Chromoly +Body material: CompositeQ Factor: 61.5mmGrip: 8 Metal Pins Per SideTechnology: Flat PedalsPlatform area: 107x105mmProfile: 18mmPedal: 162gWeight pair: 324g