Magnetic Drive unit with an integrated Misuro B wireless speed sensor which allows you to use your Bluetooth or ANT enabled Android or iOS device as a powerful multifunctional trainer head unitComes with a free 6 month subscription to Elite's My E-Training app but can also be used with third party software for a huge variety of training optionsStrong Power Mag resistance unit with 8 levels of resistance controlled from the handlebar though an innovative trigger adjusterCutting edge Qubo frame offers a wider footprint with adjustable feet for improved stability and lower bike height for easier mountingNo need to calibrate roller pressure the rider's weight presses the tyre into the roller meaning automatic adjustment and easy set-upThe Qubo frame also repositions the rear drive unit to allow use with fat-tyred 29ersElastoGel roller has improved tyre grip reduces tyre wear and vibrations and offers significant noise reduction over other rollersIncludes spare Q/R for those using Mavic or similar non-compatible Q/R skewers
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong Full 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. The Clutch V2 is laced to the G-Sport Ribcage Rim. At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for&G-Sport in an on-site foundry. It is a lightweight rim that can take anything you throw at it. With the Ribcage, the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Clutch V2 Freecoaster AXLE: 14mm Chromoly Male DRIVE SIDE: Right Side Drive RIM: G-Sport Ribcage SPOKES: Butted NIPPLES: Brass WEIGHT: 1389g / 49oz
The Elite Quick-Motion rollers are a versatile turbo trainer which can simulate steady gradients and provide up to 425-watts of resistance. When combined with a Misuro B+ sensor, it can measure power, speed, cadence and other data too, for the ultimate indoor training experience on apps like Zwift and Traineroad. Because the rollers are adjustable, this turbo trainer can fit a variety of wheelbases making it a perfect choice for those who want to train for mountain biking as well as road riding. With a floating system and smooth roller bearings, these rollers offer an incredibly steady, quiet ride, even when you’re cranking out the watts. Unlike other bulkier turbo trainers, all this performance can be neatly folded away when the summer rolls round. High-quality smart rollers Simulate steady gradients With a Misuro B+ sensor it can measure power, speed, cadence too Provides resistance up to 425-watts 3-level integrated magnetic system Folds into three parts for reduced clutter Parabolic rollers for smooth, quiet running Integrated handle for easier transportation Adjusts to match different bicycle wheelbases Ideal for indoor training and pre-race warm-up
Part of the Performance Elite series, this high-quality dropper seatpost is equipped with a black anodised upper coating that provides an additional level of protection against wear and corrosion wherever your adventure takes you. Fox Suspension has also kitted it out with a powdercoat lower coating that allows it to handle all of challenges associated with all-day epics on your favourite trails and day-long adventures on your gravel bike. Also benefitting from internal cable routing, this versatile model provides a sleek look on your ride while also minimising any risk of damage from dirt or debris. Super Light Done Right Meet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has branded it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it (finally) brings the word “shred” into the super-lightweight cross country (XC) and gravel conversation. Performance Elite Series Dropper Seatpost Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, patent-pending head design and proven internals as the Factory Series but they feature a black anodised upper instead of a genuine Kashima coating. This Performance Elite series model's anodised upper is ideal for riders who want increased strength and durability on their ride, while also benefitting from its lightweight and responsive actuation. Technologies: - Updated lightweight design. - Updated Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. - 2-position mechanical post that locks at the top and bottom only. - Longer travel configurations offer exposed length of 290mm for taller riders. - Shorter travel configurations offer shorter total length for smaller riders. - Coil spring for consistent return performance. - Internal routing only. - 27.2, 30.9 and 31.6mm diameter options to choose from. - 50, 70, 75, and 100mm drop options to choose from. - 70-85deg seat angles are supported. - 7mm and 7x9 saddle rails supported. - 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible (levers available separately). Manufacturer's Part Numbers: 925-01-203 350mm 27.2 x 50mm 925-01-202 370mm 27.2 x 70mm 925-01-210 355mm 30.9 x 75mm 925-01-208 380mm 30.9 x 100mm 925-01-211 355mm 31.6 x 75mm 925-01-209 380mm 31.6 x 100mm
Fox Suspension Transfer SL Perf Elite Dropper PostThis dropper seatpost is part of the renowned Performance Elite series and it features a black anodised upper coating for an extra level of protection against wear and corrosion wherever your next adventure leads you. Fox Suspension has also kitted it out with a powdercoat lower coating that allows it to handle all of challenges associated with all-day epics on your favourite trails and day-long adventures on your gravel bike. Also benefitting from internal cable routing, this versatile model provides a sleek look on your ride while also minimising any risk of damage from dirt or debris.Super Light Done RightMeet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has branded it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it (finally) brings the word “shred” into the super-lightweight cross country (XC) and gravel conversation.Performance Elite Series Dropper SeatpostPerformance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, patent-pending head design and proven internals as the Factory Series but they feature a black anodised upper instead of a genuine Kashima coating. This Performance Elite series model's anodised upper is ideal for riders who want increased strength and durability on their ride, while also benefitting from its lightweight and responsive actuation.Features: Upper Coating: Black Anodised Lower Coating: Powdercoat Black Use: Mountain Bike (MTB), Cross Country (XC) and Gravel Cable Routing: Internal only Remote Included: No, available separately Weight: 27.2x50mm Option: 327g; 27.2x70mm Option: 338g; 30.9x75mm Option: 342g; 30.9x100mm Option: 347g; 31.6x75mm Option: 352g; 31.6x100mm Option: 359gTechnologies: Updated lightweight design. Updated Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. 2-position mechanical post that locks at the top and bottom only. Longer travel configurations offer exposed length of 290mm for taller riders. Shorter travel configurations offer shorter total length for smaller riders. Coil spring for consistent return performance. Internal routing only. 27.2, 30.9 and 31.6mm diameter options to choose from. 50, 70, 75, and 100mm drop options to choose from. 70-85deg seat angles are supported. 7mm and 7x9 saddle rails supported. 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible (levers available separately).Manufacturer's Part Numbers: 925-01-203 350mm 27.2 x 50mm 925-01-202 370mm 27.2 x 70mm 925-01-210 355mm 30.9 x 75mm 925-01-208 380mm 30.9 x 100mm 925-01-211 355mm 31.6 x 75mm 925-01-209 380mm 31.6 x 100mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ultimate in workshop efficiency with the option to add an integrated digital weight scale. Features a freeangle rotating clamp with infinite adjustability and a tripod base which is extra stable for heavy wrenching jobs.Tough 6061 T6 aluminium tube,360° rotation clamp,Non-marking rubber jaws with spin lever closure,Easy to fold, store and open with two QR clamps,Rubber base feet,25kg (55lbs) weight limit,Carrying bag included,Clamp height: 122cm to 183cm,Clamp opening: 1.9cm to 4.5cm,Folded: 17.8x117cm,Base diameter: 135cm,6.2kg.
The Norrona falketind Gore-Tex Paclite Pants boast an incredibly lightweight design, alongside a premium waterproof and breathable Gore-Tex® membrane. Made for all-year mountaineering, as well as general outdoor activities and anything from trekking to ski touring, the world-leading membrane offers durable waterproofness of 28,000mm, alongside optimised breathability and total windproofness. Other key features include a custom-fit waist system™, a zippered thigh pocket with a mesh pocket, ¾ side zippers for flexible ventilation and effective dressing, a bootlace hook, hook-and-loop adjustment on the ankles, and eyelets if you want to fasten a cord around the boot to make sure it stays in place. The pants also have a technical fit with articulated knees to improve mobility.
The Norrona Women's falketind Gore-Tex Paclite Pants are made in a GORE-TEX PACLITE® PLUS fabric, which is soft and lightweight with a 30D recycled nylon face. This makes the trousers incredibly packable, thin, and lightweight while being durably waterproof, windproof, and breathable as well. They also have printed dots on the backer with a 3D function to keep distance to the body and create higher friction and a less sticky durable interior. Additionally, the bottom leg is made in a 30D 3L GORE-TEX® to increase durability where the pants tend to rub against your boots. Finished with a technical fit with articulated knees to improve mobility.
The SL is 25% lighter than our standard transfer post, making it the lightest mainstream dropper on the market. With lever options for drop bars, flat bars, and 2x front shifters, it's the perfect upgrade for Gravel riders and diehard xc racers who want the Performance of a dropper but not the extra heft. Levers sold separately. Features: NEW lightweight design. NEW Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. 2-position mechanical post that locks at the top and bottom only. Longer travel configurations offer exposed length of 290mm for taller riders. Shorter travel configurations offer shorter total length for smaller riders. Coil spring for consistent return performance. Internal routing only. 27.2, 30.9 and 31.6mm diameters. 50, 70, 75, and 100mm drop options. 70-85deg seat angles are supported. 7mm and 7x9 ‘Ob-round' saddle rails supported. 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible.
Feedback Sports Pro Elite Repair Workstand Used by race mechanics around the world, the Feedback Sports Pro-Elite Repair Stand is designed for professionals. Highly stable on rough ground, it's fully portable and much quicker to use that any other portable or fixed shop workstand. To use the clamp, simply push to close and tighten. To open it fully, just press the release button, it really couldn't be simpler. Features: Stand Material: Anodized red aluminium Clamp: Pro-Elite Clamp Opening: 19mm - 66mm Clamp Rotation: 360° Clutch, folds for storage Work Height: 1070mm: 1800mm Folded Size: 203mm x 1168mm Load Capacity: 38.6kg (80lbs) Weight: 5.9kg Buy Feedback Sports Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The fast-acting clamp on this workshop essential boasts an Innovative "Secure-Lock" features ratchet-action closing and push-button release. The updated clamp quickly gets bikes in and out of the stand, has 360° rotation and fits on different tube diameters. Also, the Feedback Sports Pro Elite Workstand has Narrow 82.5mm (3.25") jaws that fit in tight spaces and the 66mm (2.6") clamp opening accommodates recumbent and other large tubed frames. Additional Features: True Portability: Weighs only 5.9kg (13lbs), it's for compact travel and storage. Maximum stability: Stiff tripod design allows wrenching on flat or uneven surfaces. The stand holds up to 85 lbs. on uneven surfaces (i.e. dirt, grass, slopes etc.), making the Feedback Sports Pro Elite Workstand the most heavy-duty portable repair stand available. Easily holds downhill and tandem bikes. Large rubber foot caps enhance grip on all surfaces and won't fall off. Most Durable: The finest materials and proven reliability for the best, professional-quality repair stand. Completely water submergible, this stand eliminates rust and moisture damage.
Mavic XA Elite Carbon MTB Front WheelReady for long days on your favourite local trails as well as intense cross country racing events, this front wheel is well-equipped for the demands of modern mountain bike (MTB) riding. It features a high-quality 100% unidirectional carbon fibre rim construction, which gives you an excellent balance of stiffness and strength as well as an overall low weight on your ride. Thanks to its hookless, tubeless-ready rim profile, you'll also enjoy tubeless advantages such as superior traction, smoother rolling performance and less chances of flats or punctures. Coming complete with 6-bolt disc brake compatibility, this model ensures powerful and consistent braking as you dominate your way from trail to trail.Features: Rim Material: 100% Unidirectional Carbon Fibre with hookless profile Use: Mountain Bike (MTB), Cross Country (XC) Axle Size: 15x100mm Internal Rim Width: 30mm ETRTO: 584x30TSS Drilling: Traditional Tubeless Ready: Yes Rim Profile: Hookless profile Tyre Compatibility: Hookless compatible UST tubeless and tubetype Recommended Tyre Sizes: 60mm to 76mm (2.35" to 3.0") Valve Hole Diameter: 6.5mm Spoke Material: Steel Spoke Shape: Straight pull, round Spoke Count: 24 Spoke Lacing: 2 cross Wheel Hub Body: Aluminium Axle Material: Aluminium Brake Compatibility: 6-bolt disc brake Bearings: Auto adjust sealed cartridge bearings (QRM Auto) Max Rider Weight: For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg, bike included ASTM Category 3: Cross country and trail riding Single or Pair: Single front wheel Weight: 764gManufacturer's Part Number: LF8165100 Black 27.5"Buy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.