Shimano and Campagnolo track. For 1/8" (3.17mm) track chain.Key Features:Material : 7075 T6 aluminium.,PCD : 144mm.,Sizes : 44 to 52 teeth.,Colour : silver..
The quality of gear shifting is very high, thanks to ramps added on the outer chainring.CNC machined chainrings compatible with 10 or 11 speed MTB.Key Features:Material: 7075 T6 aluminium,Inner: 64pcd,Middle: 104pcd,Outer: 104pcd 18/23mm wide arm,Colour : Black,Weight : 65g (Outer 42t).Please note there are two widths of arm available 18mm and 23mm. This is measured where the arm of the chainring meets the arm of the spider, just below the bolt holes.
High quality chromed chainring bolts made by Specialites TA.,5 x Standard double steel chainring bolts.
X112 and X145 chainringsDesigned to be perfectly Compatible with 2015 Campagnolo 11x 4 arm Chorus, Record and Super Record carbon chainsets.Matches Campagnolo's shifting ramps and pins, generally speaking, for optimal gear shifting, it is strongly advised to replace all chainrings with Specialites T.ACompletely CNC machined, very light and stiff.112mm BCD - Al 7075 T6 - 4 hole - Inner145mm BCD - Al 7075 T6 - 4 hole - Outer
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers.Nerius for Campag 11x only, can convert Some Campag Carbon 10x chainsets to 11x.,Can be fitted to Super Record, Record, Chorus, Athena and Centaur chainsets.,Weights: 34T 29g to 50T 78g.
100% compatibility with 10/11 speed transmissionsMaterial: aluminium 7075 T6,Compatibility: 10/11 speed,Spacing: 110 mm,Interior: 34, 36, 38 teeth,Exterior: 46, 48, 50, 52 teeth.
The C116 chainrings are compatible with Shimano XTR cranksets (from 2003 to 2006).These chainrings are the perfect replacement for the Shimano XTR M960 rings and are 25% lighter compared to the originals!The special PCD, only used on the M960 crank bolt pattern makes it difficult to find a replacement if the original rings are worn.For clean up-shifts 4 shift pins are attached to the inside of the 32t and 44t ring.Produced in the FranceTechnical data:Compatibility: only XTR M960,Material: aluminium 7075,Number of teeth: 22-32-44 teeth,PCD: 64mm, 102mm, 146mm,Speed: 8, 9, 10x,Colour: black, silver teeth.Individual Ring data:44t, PCD 146mm, 5mm thickness, 63g,32t, PCD 102mm, 5mm thickness, 34g,22t, PCD 64mm, 4mm thickness, 19g.
Spank Split 35 Mountain Bike StemBuilt for big and bold 35mm enduro bars, the strong Split 35 stem delivers a firm and protective performance and an ultra-reliable connection between your bar and fork. Aimed at enduro and all-mountain (AM) adventurers, it’s constructed using a 3D-forged, CNC-optimised, 6-series alloy and features a chamfered clamp that reduces fatigue and stress at vital areas on your bars. Optimised for use on 35mm diameter bars, this shot peen anodised-finished model will be a confidence-boosting addition to your ride’s cockpit.Features:Body Material: 3D-forged, CNC-optimised, 6-Series Alloy with 2D-forged faceplate Finish: Shot Peen Anodised Rise: 0° Handlebar Clamp Diameter: 35mm Steerer Tube Clamp Diameter: 1.1/8" Stack Height: 34mm Invertible: No Included: Custom Top-Cap Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Split 35 Mountain Bike StemBuilt for big and bold 35mm enduro bars, the strong Split 35 stem delivers a firm and protective performance and an ultra-reliable connection between your bar and fork. Aimed at enduro and all-mountain (AM) adventurers, it’s constructed using a 3D-forged, CNC-optimised, 6-series alloy and features a chamfered clamp that reduces fatigue and stress at vital areas on your bars. Optimised for use on 35mm diameter bars, this shot peen anodised-finished model will be a confidence-boosting addition to your ride’s cockpit.Features:Body Material: 3D-forged, CNC-optimised, 6-Series Alloy with 2D-forged faceplate Finish: Shot Peen Anodised Rise: 0° Handlebar Clamp Diameter: 35mm Steerer Tube Clamp Diameter: 1.1/8" Stack Height: 34mm Invertible: No Included: Custom Top-Cap Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Split 35 Mountain Bike StemBuilt for big and bold 35mm enduro bars, the strong Split 35 stem delivers a firm and protective performance and an ultra-reliable connection between your bar and fork. Aimed at enduro and all-mountain (AM) adventurers, it’s constructed using a 3D-forged, CNC-optimised, 6-series alloy and features a chamfered clamp that reduces fatigue and stress at vital areas on your bars. Optimised for use on 35mm diameter bars, this shot peen anodised-finished model will be a confidence-boosting addition to your ride’s cockpit.Features:Body Material: 3D-forged, CNC-optimised, 6-Series Alloy with 2D-forged faceplate Finish: Shot Peen Anodised Rise: 0° Handlebar Clamp Diameter: 35mm Steerer Tube Clamp Diameter: 1.1/8" Stack Height: 34mm Invertible: No Included: Custom Top-Cap Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Split 35 Mountain Bike StemBuilt for big and bold 35mm enduro bars, the strong Split 35 stem delivers a firm and protective performance and an ultra-reliable connection between your bar and fork. Aimed at enduro and all-mountain (AM) adventurers, it’s constructed using a 3D-forged, CNC-optimised, 6-series alloy and features a chamfered clamp that reduces fatigue and stress at vital areas on your bars. Optimised for use on 35mm diameter bars, this shot peen anodised-finished model will be a confidence-boosting addition to your ride’s cockpit.Features:Body Material: 3D-forged, CNC-optimised, 6-Series Alloy with 2D-forged faceplate Finish: Shot Peen Anodised Rise: 0° Handlebar Clamp Diameter: 35mm Steerer Tube Clamp Diameter: 1.1/8" Stack Height: 34mm Invertible: No Included: Custom Top-Cap Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Split 35 Mountain Bike StemBuilt for big and bold 35mm enduro bars, the strong Split 35 stem delivers a firm and protective performance and an ultra-reliable connection between your bar and fork. Aimed at enduro and all-mountain (AM) adventurers, it’s constructed using a 3D-forged, CNC-optimised, 6-series alloy and features a chamfered clamp that reduces fatigue and stress at vital areas on your bars. Optimised for use on 35mm diameter bars, this shot peen anodised-finished model will be a confidence-boosting addition to your ride’s cockpit.Features:Body Material: 3D-forged, CNC-optimised, 6-Series Alloy with 2D-forged faceplate Finish: Shot Peen Anodised Rise: 0° Handlebar Clamp Diameter: 35mm Steerer Tube Clamp Diameter: 1.1/8" Stack Height: 34mm Invertible: No Included: Custom Top-Cap Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.