Designed to fit any fork, RapidRacerProducts has developed the EnduroGuard to work effectively with short-travel XC and 4X forks (80mm to 120mm travel). The 'T' shape clamping points on the arms are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer increased protection for higher speeds without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The holes for the fork brace aren't ideally located when using it as a rear mudguard, so these guards have two snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays, this feature creates more mud / tyre clearance and a much better fit.
Easy to use and prevent brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor. Follow the simple steps below: 1) Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side. 2/ Insert the Caliper Alignment Tool between the pads and the rotor. 3) Pull the brake lever- focing the pads against the alignment tool and in turn against the rotor 4) While still holding on to the brake lever, tighten the bolts on the brake caliper. 5) Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either side.
LifeLine Professional Bar Tape is supplied with everything you need for a fresh feel and increased grip on the flats and drops. The gel component helps absorb the shock transmitted from uneven road surfaces and distributes pressure more evenly across your hands. The set includes two 200cm rolls to accommodate longer bars and two custom LifeLine end plugs. Wrapping Tips LifeLine Professional Anti-Slip Bar Tape has a two tone finish. this looks best when the colours change just beneath the point where the brake/shift lever clamps on to the handle bar. It might be necessary to shorten the coloured portion of the tape to achieve this. We recommend wrapping the tape up to the clamp and measuring the length of remaining tape before the colour changes. Unwrap the tape and cut the measured length from the coloured portion before re-wrapping the tape using the figure of eight method.
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
This is the fourth generation of Ass Savers and is easily every user's best friend. Simple to install and weighing just 25.5 grammes Ass Savers Ass Saver Big is always there to cover your back. Ass Savers Ass Saver Big features the patent pending FLIP-TIP™ attachment system. Taking origami principles the FLIP-TIP™ system allows you to securely fasten the Ass Saver to the saddle with a simple flip of the tip and to unlock just flip the tip down and pull backwards. FLIP-TIP™ is compatible with all types of saddle rails including carbon rails. With the new generation of Ass Saver development has continued to reduce saddlebag interference. There is no guaranteed perfect fit but the Ass Saver Big is now a lot easier to install with a saddle bag than the previous models. Tech Spec: Measures: 383x115.5 mm Weight: 25.5 g Material: 0.8 mm PP (Polypropylene)
Clarks CMD-21 Mechanical Disc Brake CalipersReady for use on mountain bikes (MTBs), hybrid and road bikes, this pair of CMD-21 disc brake calipers bring you efficient stopping ability in all conditions. Clarks has given them a lightweight construction and they both have pad clearance adjustment, for easy setup and installation. Plus, with the cable tension adjustment barrel, you can fine-tune the biting point to maintain efficient braking and make adjustments as your cables begin to stretch with use.Features: Compatibility: Mountain Bike (MTB), Hybrid, Road Brake Type: Mechanical disc brake calipers Mount Type: Post mount Single or Pair: Single Rotor Diameter: separate 160/160mm and 160/140mm options (rotors included)Single or Pair: PairMounting Bolts Included: YesBrake Pads Included: Yes (includes two spare pairs)Brake Cables Included: Yes, 1x front and 1x rear cablePlease Note: This is a pair of disc brake calipers only, brake levers must be purchased separatelyBuy Clarks Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Clarks CMD-21 Mechanical Disc Brake CalipersReady for use on mountain bikes (MTBs), hybrid and road bikes, this pair of CMD-21 disc brake calipers bring you efficient stopping ability in all conditions. Clarks has given them a lightweight construction and they both have pad clearance adjustment, for easy setup and installation. Plus, with the cable tension adjustment barrel, you can fine-tune the biting point to maintain efficient braking and make adjustments as your cables begin to stretch with use.Features: Compatibility: Mountain Bike (MTB), Hybrid, Road Brake Type: Mechanical disc brake calipers Mount Type: Post mount Single or Pair: Single Rotor Diameter: separate 160/160mm and 160/140mm options (rotors included)Single or Pair: PairMounting Bolts Included: YesBrake Pads Included: Yes (includes two spare pairs)Brake Cables Included: Yes, 1x front and 1x rear cablePlease Note: This is a pair of disc brake calipers only, brake levers must be purchased separatelyBuy Clarks Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Shoe ShieldsReduces shoe tread interface and protects carbon soled shoes. Features: Weight: 4g each Kit Interface: 2 shims Material: Stainless steel Compatible With: crankbrothers mnt cleats Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Keeps the drinking tube in position during your activity.Key Features:Two-piece design for attachment to the hip belt, backpack or vest,Extra-strong magnet,Fits all Evoc hydration systems (excluding insulated drinking tubes) , Material: ACETAL , 10g, 2 x 2 x 4 cm.
If the heel pads on your Sidi cycling shoes are worn, these Antislip Heel parts will bring them new life and ensure you can continue to enjoy the ride for many more seasons.
Endurance®+ - Designed to last longer Endurance®+ uses a blend of PBT and polyester fibres which help to provide high chlorine resistance. Longer lasting fit through wear and use and resists snagging and fading for longer than other swim fabrics. Featuring multi-directional stretch fabric for added softness and comfort, it also provides UVA and UVB protection from the sun.
Interchangeable, precision engineered Shimano disc brake caliper mount adapters. Designed to mount post type disc calipers to either international standard or post type disc brake mounts on most frames and forks. Available in front or rear versions to suit most rotor sizes & suitable for most brands of post type calipers.