crankbrothers Eggbeater 11 Ti MTB PedalsTake a sweet ride with the Eggbeater 11 Ti pedal. Weighing in at only 174g per pair, the 11 Ti features all titanium construction with Eggbeater's four-sided entry.The choice of mountain bike pros worldwide, these pedals shed mud like water off a duck. Super easy to service, making them an viable investment for seasons to come.Features: Titanium body, inner wing, sleeve and spindle for ultimate weight savings Low-profile design keeps the sole close to the spindle for a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15° or 20° release angle gives you a customized fit for all terrain 10mm needle bearing inner and cartridge bearing outer Brass cleat and mounting hardware included WEIGHT: 174g/pair Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Eggbeater 2 MTB PedalsThe Eggbeater 2 pedal is slightly lighter than its brother the Eggbeater 3. Features Crank Brother's exclusive, four-sided entry, mud shedding design, and weight saving minimalism.Features: Cast stainless body and spring with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and cartridge bearing outer Plastic end caps Brass cleat and mounting hardware included Weight: 272g/pair Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The design for the original crank brothers pedal began out of frustration. The founders of crank brothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. A word on maintenance In order to keep your crank brothers pedals running smoothly, they recommend the following: clean pedals every 30 hours of ridingremove the pedal body from the spindle and wipe it clean of any dirty greaseapply fresh grease to the inside of the pedal before re-installing the spindle
Features: Minimal and lightweight Four-sided entry and superior mud shedding Customisable float & release angle Hex alloy end cap Premium bearings & double seal system
crankbrothers Mallet 2 MTB PedalsDual material pedal DH/Race with stamped steel wings. Adjustable pins for custom traction control.Features:Weight: 495g per pairSpindle: forged scm435 chromoly steelPlatform: two piece aluminum nylon bodyWings: stamped steelSpring: 300 series stainless steelSpindle: forged scm435 chromoly steelInner bearing: bushingOuter bearing: cartridgeRelease angle: 15° - 20°Cleats: premium brassManufacturers Warranty: 5 years Warning: Polycarbonate is incompatible with anaerobic liquids. Do NOT use any non-Polycarbonate approved thread locking solvent (such as Loctite 242) on any part of this pedal or cracking could occur. Loctite 380 or 401 is approved for use on all bolts and pins. Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mallet DH are the pedal of choice by most Pro World Cup riders.
crankbrothers Mallet 3 Clipless Mountain Bike PedalsThe crankbrothers Mallet 3 Pedals are now even more durable with a lightweight aluminium inner body and premium bearings.Features:Flat pedal feel with clipped-in controlAluminium platform for enhanced durability6 adjustable pins per side for grip 4-sided entry / superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSpecifications:Spindle Material: Forged SCM 435 CrMo steelBody Material: AluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing type: Igus LL-glide bearingOuter Bearing type: Enduro cartridge bearingCleat: Premium brass cleats with shims includedWeight: 499g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet 3 Clipless Mountain Bike PedalsThe crankbrothers Mallet 3 Pedals are now even more durable with a lightweight aluminium inner body and premium bearings.Features:Flat pedal feel with clipped-in controlAluminium platform for enhanced durability6 adjustable pins per side for grip 4-sided entry / superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSpecifications:Spindle Material: Forged SCM 435 CrMo steelBody Material: AluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing type: Igus LL-glide bearingOuter Bearing type: Enduro cartridge bearingCleat: Premium brass cleats with shims includedWeight: 499g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ideal pedal for those wanting the feel of a flat pedal with the security of being clipped in.
Launched to celebrate the Crankbrothers 25th anniversary, these limited-edition Mallet Boa MTB Clipless Cycling Shoes combine the same innovative design features as the original, alongside a unique splatter pattern, contrast gum sole, and silver accents. Still overflowing with features to make your mountain biking experience more comfortable and more assured, the Mallet Boa MTB Clipless Cycling Shoes benefit from the same attention to detail that Crankbrothers apply to their pedals. The clever Match System optimises cleat engagement for any MTB clip-in system, keeping you confidently in control when flying over technical terrain. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while TPU reinforcements add abrasion resistance in vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Match Box MTB Pedal System Crankbrothers have carefully engineered their unique Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer. Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Twist and Go Making adjustment super-quick and super-easy, the BOA® Fit System lets you dial in the fit of your shoes just right every time. A simple twist of the dial offers micrometric adjustment, so your shoes are never too tight and never too loose. Plus, it's easy to adjust on-the-fly and it's light too. Cleat Guidance These MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
Mallet Boa MTB Clipless Cycling Shoes (25th Anniversary)Launched to celebrate the Crankbrothers 25th anniversary, these limited-edition Mallet Boa MTB Clipless Cycling Shoes combine the same innovative design features as the original, alongside a unique splatter pattern, contrast gum outsole, and silver accents. Still overflowing with features to make your mountain biking experience more comfortable and more assured, the Mallet Boa MTB Clipless Cycling Shoes benefit from the same attention to detail that Crankbrothers apply to their pedals. The clever Match System optimises cleat engagement for any MTB clip-in system, keeping you confidently in control when flying over technical terrain.The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while TPU reinforcements add abrasion resistance in vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Match Box MTB Pedal SystemCrankbrothers have carefully engineered their unique Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Twist and GoMaking adjustment super-quick and super-easy, the BOA® Fit System lets you dial in the fit of your shoes just right every time. A simple twist of the dial offers micrometric adjustment, so your shoes are never too tight and never too loose. Plus, it's easy to adjust on-the-fly and it's light too. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Features:Downhill/Enduro ShoeBOA® Fit System and strap for micro-adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimised for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimised for contact surface and compatibilityDirectional angled and spaced toe/heel lugs for traction while hiking and ramped toe for walkability2 bolt cleat compatible - pre-installed Match Shim for Crankbrothers pedals - pre-installed cleat for Crankbrothers pedalsBuy Crankbrothers cycling shoes from Chain Reaction Cycles, the World's Largest Online Bike Store.