The PC-X1 chain comes from a long line of dependable lightweight chains that are built for toughness. Designed with SRAM's trusted XX1 geometry the PC-X1 features solid pin construction 11-speed PowerLock and smooth efficient shifting that you can count on every time out.
The LinkLube All Season Starter Pack contains one 60ml Bottle of Dry All Weather and Wet LinkLube so with one purchase you'll be covered for riding in all season and any weather condition. At a 10% discount (compared to buying the three bottles of 60ml LinkLube individually) The All Season Starter Pack works as a gift or for someone to try out the full LinkLube range for the first time. Features One bottle of 60ml LinkLube Dry. One Bottle of 60ml LinkLube All Weather. One Bottle of 60ml LinkLube Wet. Attractive shelf-ready packaging with integrated Euro hanger made from FSC certified cardboard.
SHIMANO CAPREO - 9-Speed - Super Narrow - HYPERGLIDE - Chain Built for 9-speed drivetrains the HG-53 chain features SUPER Narrow HG technology and precise construction. FEATURES Precise construction Weight: 304 g PRODUCT SPECIFICATIONS MODEL NO CN-HG53 SERIES SHIMANO CAPREO F800 Series Average weight 299 Chromizing treatment roller link pin ✔ Type HG 9-speed Pin link plate Gray Roller link plate Brown TECHNOLOGIES HG Hyperglide
LinkLube Dry is a readily biodegradable wax-based chain lube for use in desert dry and dusty to mildly moist conditions. Our unique formula uses a blend of waxes suspended in a water-based emulsion to give you a long-lasting clean-running quiet chain. Looking for a lube to handle wetter weather? Check out LinkLube All Weather. ALL WEATHER VS. DRY... WHAT'S THE DIFFERENCE? Linklube all weather is our one-stop chain lube for most weather conditions. While the base carrier fluid we use has fast penetrating chain cleaning properties it will never become fully dry to the touch. This can lead to unwanted dust attraction in the driest dustiest conditions so a more bespoke dry lube is required. WHY WATER? WHY WAX? Wax is the best lubricant for dry conditions because when applied correctly it will fill your links and rollers with a hard slippery coating which will last for ages on the trails and is dry to the touch - so dry dirt and dust will not stick to it. For more details on the formulation check out the 'tell me more' section below. APPLICATION When applied for the first time it is essential that linklube dry is applied to a well-degreased and dry drivetrain. If a chain is dirty then dirt and old lube take up space in the rollers preventing new lube from reaching the places it needs to and any residual oil-based lube can also result in reduced durability and premature blackening. Fully degrease before applying fresh lube to ensure there is no old chain oil present. For best results use our foaming drivetrain degreaser or in the case of brand new chains use xxx solvent degreaser to remove stubborn factory greases. Ensure you thoroughly rinse your chain with clean water after degreasing (degreaser is designed to eat chain lube after all). Allow chain to dry thoroughly before application. Apply to the inside face of the chain only. The light blue colour to the chain lube allows you to see exactly where you have and haven't applied. Keep the chain cycling for 20 seconds to help the lube penetrate fully into the pins and rollers. Check for over-application. You can tell if you over-apply linklube dry because you'll see the lube start to fill the narrow chain links. If this happens just slowly cycle through your gears a few times to transfer the excess lube onto the cassette. You'll see the lube disappear from the narrow links leaving lube only where it's needed on the chain. Leave to fully dry so the lube goes from a light blue colour to completely clear (you're waiting for the water to evaporate so leaving it in the sun helps). How long it takes for the water to evaporate - and for the lube to turn clear in colour - depends on the weather conditions. This can range from just a few minutes (if hot) to a few hours (if cold and damp). For best results apply the night before. Ride! CAUTION - Do not get LinkLube (or any lube for that matter!) on your brakes or brake pads.
Heavy duty E-bike chain designed for the added torque of the Shimano STEPS drive unit For single ring chainset use Compatible with 9-speed Sil-Tec surface treatment technology on inner and outer links that is smooth running and increases durability Includes rivet pin 138 links
Super Narrow Hyperglide (HG) series 10-speed compatible directional chain recommended for Tiagra drivetrains. Chain uses a directional design with specifically shaped inner and outer plates to optimise shifting over the chainset and cassette. Outer plate design has been developed to reduce the chance of chain suck The inner plate has been developed for better contact with gears providing smoother shifting under high load giving efficient pedalling increased rigidity and near silent running For use with double chainset only 5.88 mm chain width optimised for 10-speed Super Narrow HG drivetrains Corrosion-resistant grey finish on outer plates 116 links 277 grams (114 links)
Hyperglide (HG) series 7- or 8-speed compatible chain recommended for 1995 and earlier Deore LX / STX-RC and 1999 and earlier 105 drivetrains. HG technology has chamfered inner plates to optimise shifting performance on HG sprockets. Durability is assured through a chromising treatment on link pins and the heat treatment of rollers pins and plates Mushrooming of the pins gives unsurpassed side-plate retention enabling the chain to far exceed the BS/ISO standard for breaking force Comes complete with Quick Link which enables fast tool free chain assembly 7.3 mm chain width optimised for 7- and 8-speed HG drivetrains Corrosion-resistant grey finish on inner and outer plates 116 links 335 grams
SRAM chain engineers developed PowerLock as a tool free sure and consistent way to connect our 11 speed chains. While PowerLock does not require special tools for install the especially tight tolerances of 11 Speed drive trains mandated that each PowerLock is good for a one-time application only.
SRAM chain engineers developed PowerLock as a tool free sure and consistent way to connect our 10 speed chains. While PowerLock does not require special tools for install the especially tight tolerances of 10 Speed drive trains mandated that each PowerLock is good for a one-time application only.
SRAM PC830 7/8SPD CHAIN GREY (114 LINKS) Accurate shifting excellent wear resistance and superior durability with 8 and 9 speed compatibility: the SRAM PowerChain II wont let you down.
The newest narrower SRAM PC-1170 chain features more heavily chamfered outer plates for improved shifting and quieter running. The chrome hardened pin construction provides longer chain life. Narrower Profile for 11-speed compatibility PowerLock® Technology
SRAM PC1110 11spd Bike Chain w/ Powerlock Grey (114 Links)