Over time fork stanchions can become dry and less responsive. This can result in loss of travel, slow rebound, and cause the fork to feel very stiff over bumps. When this happens, this top-quality suspension spray will immediately improve your fork's performance. Additionally, it's made with carefully chosen polysiloxane and advanced fluoropolymers, it's formulated to fight stiction, condition and protect seals, o-rings, and other rubber parts. It improves the surface slip of any stanchion, even ones that are coated. It's perfect for use on your old forks to bring them back to life or to help break in new forks and optimise their performance. As it reduces stiction, forks run more smoothly and quietly. Small bumps are instantly absorbed and response to big hits is noticeably improved.
This superb model is formulated specifically for lubricating electric assist drivetrains that are subject to particularly high pressure and torque. Additionally, most mid-drive e-Bike systems will add up to an additional 250 Watts to the rider's input and some performance models can add up to 350 Watts. This consistent, high power means that chains experience much higher rates of wear. While developing this lube, the goal was to create a lubricant that could not only stand up to the high torque associated with electric assist drivetrains, but which also provided long lubrication intervals, would shed dirt, prevent premature wear, and provide superior protection against rust and corrosion. Finally, with a semi-dry formulation and the proprietary blend of high pressure and corrosion inhibiting additives, Finish Line's e-Bike Chain Lube delivers on all fronts.
Easy to use and prevent brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor. Follow the simple steps below: 1) Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side. 2/ Insert the Caliper Alignment Tool between the pads and the rotor. 3) Pull the brake lever- focing the pads against the alignment tool and in turn against the rotor 4) While still holding on to the brake lever, tighten the bolts on the brake caliper. 5) Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either side.
Ideal for commutters or long distance riders the grips are 131.6mm wide and 41mm at there deepest point. The grips combine a hard plastic inner with a rubber/gel outer. The outer of the grip feature a microtech texture with embossed cross hatching- putting grip in the right places and minimising unneccessary friction. The closed end construction removes the need for bar end plugs. The anodised laser etched clamp and bolt allow the rider to secure the grips firmly in place. For a deeper option, check out the Lifleline Deep Palm Comfort Ergo Grips.
Ideal for commutters or long distance riders the grips are 136mm wide and 51mm at their deepest point. The grips combine a hard plastic inner with a rubber/gel outer. The outer of the grip feature a microtech texture with embossed cross hatching- putting grip in the right places and minimising unneccessary friction. The closed end construction removes the need for bar end plugs. The anodised laser etched clamp and bolt allow the rider to secure the grips firmly in place. For a shallower option, check out the Lifleline Shallow Palm Comfort Ergo Grips.
We like to ride our bikes and we like to explore. We believe you don't need to pay over the odds for the privilege and so we created the Lifeline Adventure Series of bags- maximising quality and design at a sensible price. The bags are made from a Lightweight 300D Polyester Ripstop with TPU coating and feature a fully welded construction. The Adventure Top Tube Bag has a reinforced base and features a reflective Lifeline graphic. The easy pull zip and reflective puller helps with 'on the move' access. The zip garage provides added protection from the elements. The robust hypalon staps are sized to minimise 'on the bike' interference, but maximise the stability of the bag - wide strap mounting to the top tube and narrower strap for the head tube. A cable entry/ exit point at the head of the bag allows for on the go charging. We packed ours with a phone (Huawei P Smart 7.5cm x 16cm), a small bag of trail mix, keys, high5 gel and a bit of cash
LifeLine Professional Bar Tape is supplied with everything you need for a fresh feel and added ventilation on the flats and drops. The gel component helps absorb the shock transmitted from uneven road surfaces and distributes pressure more evenly across your hands. The set includes two 200cm rolls to accommodate longer bars, 2 strips for an even profile under the hoods and two custom LifeLine end plugs.
Brightness is key for daylight riding and the Lifeline Daylight Visible Rear Bike Light has a 38 chip COB LED providing a blaze of illumination. This coupled with a purposefully disruptive flash pattern make the Lifeline light a great partner on the road. With 7 modes to choose from the rider can balance the road and light conditions against the most appropriate illumination. The light is Micro USB Rechargeable taking 2 hours to achieve a full charge. The light can be post or helmet mounted and comes with both a post mount bracket (fits 19-32mm dia) and a velcro helmet strap. Burn times are as per below: High Beam (1.5HRs), Low Beam (4.5HRs), Flash 1 (20HRs), Flash 2 (5HRs), Flash 3 (7.5HRs), Flash 4 (15HRs), Daytime Flash (8HRs). Need to know how much battery is remaining? Simply double click on the light to show the remaining capacity. A constant light indicates 100-50% battery remaining, a slow flash indicates 49-25% and a fast flash tells you there's less than 24% battery remaining.
The LifeLine CO2 Inflator Head with Control Valve delivers quick and easy tyre inflation to get you back on the roads and trails as quickly as possible after a puncture. Simply thread a cartridge into the cartridge mount, press the head onto the valve and turn the control valve to begin inflating. Close the valve at any time during inflation to retain pressure for later inflations; ideal for topping up tyres with slow punctures until the next stop. With a precision CNC alloy construction, the LifeLine CO2 Inflator Head with Control Valve retains pressure and discharges effectively with minimal leakage.
The block is robust and allows a smooth rotation of your front wheel. This is brilliant when you're putting in big efforts as the slight movement enables a more fluid training experience. The rotation also reduces the strain you're putting through the front wheel. Stable and Immersive Swivel Riser Block This experience-enhancing addition is 14cm at its highest point and has a wider and narrower moulded recess for both Road and MTB tyres. The inner channel measures 30mm at its widest and the outer recess will accommodate tyres up to 65mm. Plus, its swivel mechanism has enough friction to enable a fluid-controlled movement that is reassuring when on the bike.
Compatible with both Road and MTB SRAM Avid Brake Systems.
Out front GPS cycle computer mount that's compatible with Garmin and Wahoo cycle computers.