The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
Protect yourself to the max with the Race Face Flank Liner D30 shorts. The Flank Liner shorts are designed to take on the big stuff, from World Cup Downhill tracks to that insane drop you built in the abandoned quarry, the Flank Liners will keep you protected, no sweat! The shorts feature removable D30 foam inserts in the hips which provide you with high performance shock absorbing protection. With a low-profile custom moulded foam on the outer thigh and strategically placed durable mesh fabric these shorts are highly protective and comfortably in all the right places. If you are planning to go bigger or faster than ever before then kit up with the Flank Liner shorts.Size Chart:
Protect yourself to the max with the Race Face Flank Liner D30 shorts. The Flank Liner shorts are designed to take on the big stuff, from World Cup Downhill tracks to that insane drop you built in the abandoned quarry, the Flank Liners will keep you protected, no sweat! The shorts feature removable D30 foam inserts in the hips which provide you with high performance shock absorbing protection. With a low-profile custom moulded foam on the outer thigh and strategically placed durable mesh fabric these shorts are highly protective and comfortably in all the right places. If you are planning to go bigger or faster than ever before then kit up with the Flank Liner shorts.Size Chart:
Shimano's Deore XT FH-M8110 Micro Spline Rear Hub is lightweight, reliable and great value. Compatible with Shimano's 12-speed Micro Spline cassettes and using their tried and tested cup and cone bearings, the Deore XT FH-M8110 Micro Spline Rear Hub really is fit and forget!Incredibly reliable and easy to maintain cup and cone bearingsMicro Spline freehub body for use with 12-speed Shimano Micro Spline cassettes onlyCentre lock rotor mounts for quick and easily installationFast-engaging freehub mechanism provides quick accelerationLightweight at just 307gThe Shimano Deore XT FH-M8110 Micro Spline Rear Hub has been designed for use with Centre-Lock Disc rotors for secure and easy setup. The freehub body is suitable for Shimano's 12-speed Micro Spline cassettes, giving you the widest possible gear range. The super quick engaging freehub body engages every 7 degrees, giving near instant power transfer. Double contact sealing with internal grease sleeve helps to keeps out water and dirt from bearings ensuring constant smoothness and longevity whilst keeping the grease in place. Solid, reliable and great value, the Shimano Deore XT FH-M8110 Micro Spline Rear Hub is a great centre piece for any quality wheelset.
The Shimano SM-CB90 Inline Quick Release Brake Cable Adjusters is an inline barrel adjuster for fine tuning your brake set up. The high grade barrel adjuster can be installed inline on SLR or M-System brake cables to allow fine adjustment of brakes and uses a quick release function for easy opening of road brake calipers. Often used on road and TT bikes with bottom bracket mounted rear brakes.
Shimano's SLX FH-M7110 Micro Spline Rear Hub is lightweight, reliable and great value. Compatible with Shimano's 12-speed Micro Spline cassettes and using their tried and tested cup and cone bearings, the SLX FH-M7110 Micro Spline Rear Hub really is fit and forget!Incredibly reliable and easy to maintain cup and cone bearingsMicro Spline freehub body for use with 12-speed Shimano Micro Spline cassettes onlyCentre lock rotor mounts for quick and easily installationFast-engaging freehub mechanism provides quick accelerationLightweight at just 354gThe Shimano SLX FH-M7110 Micro Spline Rear Hub has been designed for use with Centre-Lock Disc rotors for secure and easy setup. The freehub body is suitable for Shimano's 12-speed Micro Spline cassettes, giving you the widest possible gear range. The super quick engaging freehub body engages every 7 degrees, giving near instant power transfer. Double contact sealing with internal grease sleeve helps to keeps out water and dirt from bearings ensuring constant smoothness and longevity whilst keeping the grease in place. Solid, reliable and great value, the Shimano SLX FH-M7110 Micro Spline Rear Hub is a great centre piece for any quality wheelset.
Shimano's SLX FH-M7110 Micro Spline Rear Hub is lightweight, reliable and great value. Compatible with Shimano's 12-speed Micro Spline cassettes and using their tried and tested cup and cone bearings, the SLX FH-M7110 Micro Spline Rear Hub really is fit and forget!Incredibly reliable and easy to maintain cup and cone bearingsMicro Spline freehub body for use with 12-speed Shimano Micro Spline cassettes onlyCentre lock rotor mounts for quick and easily installationFast-engaging freehub mechanism provides quick accelerationLightweight at just 354gThe Shimano SLX FH-M7110 Micro Spline Rear Hub has been designed for use with Centre-Lock Disc rotors for secure and easy setup. The freehub body is suitable for Shimano's 12-speed Micro Spline cassettes, giving you the widest possible gear range. The super quick engaging freehub body engages every 7 degrees, giving near instant power transfer. Double contact sealing with internal grease sleeve helps to keeps out water and dirt from bearings ensuring constant smoothness and longevity whilst keeping the grease in place. Solid, reliable and great value, the Shimano SLX FH-M7110 Micro Spline Rear Hub is a great centre piece for any quality wheelset.
Shimano's SLX FH-M7110 Micro Spline Rear Hub is lightweight, reliable and great value. Compatible with Shimano's 12-speed Micro Spline cassettes and using their tried and tested cup and cone bearings, the SLX FH-M7110 Micro Spline Rear Hub really is fit and forget!Incredibly reliable and easy to maintain cup and cone bearingsMicro Spline freehub body for use with 12-speed Shimano Micro Spline cassettes onlyCentre lock rotor mounts for quick and easily installationFast-engaging freehub mechanism provides quick accelerationLightweight at just 354gThe Shimano SLX FH-M7110 Micro Spline Rear Hub has been designed for use with Centre-Lock Disc rotors for secure and easy setup. The freehub body is suitable for Shimano's 12-speed Micro Spline cassettes, giving you the widest possible gear range. The super quick engaging freehub body engages every 7 degrees, giving near instant power transfer. Double contact sealing with internal grease sleeve helps to keeps out water and dirt from bearings ensuring constant smoothness and longevity whilst keeping the grease in place. Solid, reliable and great value, the Shimano SLX FH-M7110 Micro Spline Rear Hub is a great centre piece for any quality wheelset.
Shimano's SLX FH-M7110 Micro Spline Rear Hub is lightweight, reliable and great value. Compatible with Shimano's 12-speed Micro Spline cassettes and using their tried and tested cup and cone bearings, the SLX FH-M7110 Micro Spline Rear Hub really is fit and forget!Incredibly reliable and easy to maintain cup and cone bearingsMicro Spline freehub body for use with 12-speed Shimano Micro Spline cassettes onlyCentre lock rotor mounts for quick and easily installationFast-engaging freehub mechanism provides quick accelerationLightweight at just 354gThe Shimano SLX FH-M7110 Micro Spline Rear Hub has been designed for use with Centre-Lock Disc rotors for secure and easy setup. The freehub body is suitable for Shimano's 12-speed Micro Spline cassettes, giving you the widest possible gear range. The super quick engaging freehub body engages every 7 degrees, giving near instant power transfer. Double contact sealing with internal grease sleeve helps to keeps out water and dirt from bearings ensuring constant smoothness and longevity whilst keeping the grease in place. Solid, reliable and great value, the Shimano SLX FH-M7110 Micro Spline Rear Hub is a great centre piece for any quality wheelset.
Shimano's Deore XT FH-M8110 Micro Spline Rear Hub is lightweight, reliable and great value. Compatible with Shimano's 12-speed Micro Spline cassettes and using their tried and tested cup and cone bearings, the Deore XT FH-M8110 Micro Spline Rear Hub really is fit and forget!Incredibly reliable and easy to maintain cup and cone bearingsMicro Spline freehub body for use with 12-speed Shimano Micro Spline cassettes onlyCentre lock rotor mounts for quick and easily installationFast-engaging freehub mechanism provides quick accelerationLightweight at just 307gThe Shimano Deore XT FH-M8110 Micro Spline Rear Hub has been designed for use with Centre-Lock Disc rotors for secure and easy setup. The freehub body is suitable for Shimano's 12-speed Micro Spline cassettes, giving you the widest possible gear range. The super quick engaging freehub body engages every 7 degrees, giving near instant power transfer. Double contact sealing with internal grease sleeve helps to keeps out water and dirt from bearings ensuring constant smoothness and longevity whilst keeping the grease in place. Solid, reliable and great value, the Shimano Deore XT FH-M8110 Micro Spline Rear Hub is a great centre piece for any quality wheelset.
Shimano's Deore XT FH-M8110 Micro Spline Rear Hub is lightweight, reliable and great value. Compatible with Shimano's 12-speed Micro Spline cassettes and using their tried and tested cup and cone bearings, the Deore XT FH-M8110 Micro Spline Rear Hub really is fit and forget!Incredibly reliable and easy to maintain cup and cone bearingsMicro Spline freehub body for use with 12-speed Shimano Micro Spline cassettes onlyCentre lock rotor mounts for quick and easily installationFast-engaging freehub mechanism provides quick accelerationLightweight at just 307gThe Shimano Deore XT FH-M8110 Micro Spline Rear Hub has been designed for use with Centre-Lock Disc rotors for secure and easy setup. The freehub body is suitable for Shimano's 12-speed Micro Spline cassettes, giving you the widest possible gear range. The super quick engaging freehub body engages every 7 degrees, giving near instant power transfer. Double contact sealing with internal grease sleeve helps to keeps out water and dirt from bearings ensuring constant smoothness and longevity whilst keeping the grease in place. Solid, reliable and great value, the Shimano Deore XT FH-M8110 Micro Spline Rear Hub is a great centre piece for any quality wheelset.