The Highline remote features a unique spherical adjustment, with near-infinite rotation and tilt customisation options, for perfect cockpit ergonomics.Pivot Remote Lever Ergonomic Spherical Adjustment - 360 Degree Rotation / 22 Degree TiltSingle Bolt Hinge Locking SystemUniversal Mounting System: Top / Bottom / Left / Right
Specifically designed to increase friction in clamped carbon fibre surfaces, Finish Line Fibre Grip Carbon Fibre Assembly Gel is an essential when dealing with expensive carbon fibre bike frames as well as components such and seatposts, handlebar's and stems. Applied as a thin film to all clamping areas, eliminating slip and lessening the need for over tightening of clamps, carbon grip gel reduces the risk of stress fractures and fatigue within the carbon fibre (which can in turn lead to catastrophic failure). Finish Line Fibre Grip is tested and approved by leading carbon fibre component manufactures.Carbon fibre assembly gelEssential when dealing with carbon fibre componentsReduces slippage between clamped surfacesProtects against fracturesTested and approved by manufacturers
The Brand-X Inline Seatpost is manufactured from lightweight 6061-T6 Aluminium for strength, stiffness and durability. The 2D Forged Head and clamp feature a micro-adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black anodised finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.Length: 400mmLayback: 0mmSizes: 26.4, 26.8, 27.0, 27.2, 30.9 and 31.6mmMaterial:6061-T6 AluminiumFinish: Turned and Anodised shaft/Anodised headColour: BlackIncremental height markingsEN-M ApprovedWeight: 308 grams (31.6mm)
Set the correct gap for any hydraulic brake caliper with the Lifeline Pro Disc Brake Caliper Alignment Tool. Easy to use and prevents brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor.Follow the simple steps below:Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side.Insert the Caliper Alignment Tool between the pads and the rotor.Pull the brake lever- forcing the pads against the alignment tool and in turn against the rotorWhile still holding on to the brake lever, tighten the bolts on the brake caliper.Release the brake lever and remove the tool and your pads should now be cantered to the rotor with an equal distance either side.Weight: 33gSize: 15cm x 3.5cmBlade length: 13cm
The LifeLine Digital Pressure Gauge provides exceptional accuracy and hassle-free performance. Enabling to you achieve the perfect pressure rating for your tyres, it not only can give you an accurate pressure reading within 3 seconds but is compatible with Presta and Schrader valves while also featuring a 'Bleed Valve' enabling you to fine-tune the inflation.Max Pressure: 160 psiValve Type: Presta & SchraderPressure Adjustment: Bleed ValveInflation Units: PSI, BAR, KPA, KG CM2Display: LCD BacklitPower Saving: Auto Power-OffTo increase accuracy and functionality even further it features both 'Calculation Mode' enabling you to measure the inflation of the tyre and 'Adjustment Mode', which allows accurate pressure measurement as you use the bleed valve to achieve the perfect inflation value.
The LifeLine Superlight PU Shock-Absorbing Bar Tape has a premium matt velvety texture, which gives you a secure grip. It also provides excellent long distance comfort due to its 2mm thick profile and gel component, which help to cushion the impacts when riding on uneven surfaces. Easy to stretch and with a self-adhesive backing this bar tapes gives you a nice tight wrap and simplifies fitting.Durable, tear resistant PU CompoundGrippy matte velvety texturePerforations with subtle red contrast base2mm profile for a light cushioning effectShock absorbing gel component for increased comfort on endurance road ridesAn element of stretch and an adhesive backing strip for a tight, secure wrap2 small finishing strips includedIncludes LifeLine end plugs
A long-lasting and reliable front bike light for the daily and distance rider, this powerful lamp by LifeLine uses a three-LED setup to keep you illuminated and seen from as many angles as possible. The central LED has a maximum 1000-lumen output while the two side LEDs feature 350 lumens each. The full combined power emits a brilliant 1700-lumen brightness with a 1 hour and 40-minute burn time.Light Modes: Central Beam Functions - Full Beam (1000 lumens), Medium (500 lumens), Low (200 Lumens) and StrobeSide Beam Functions - Full Beam (700 lumens), Medium (350 lumens) and Flashing (200 lumens)Light Types: 1x Cree XM-L2 1000 Lumen Central LED; 2x Cree XP-G3 350 Lumen Side LEDsBattery Level Indicator: 4 LEDs illuminated (+90% battery power remaining), 3 LEDs (70-90%), 2 LEDs (40-70%), 1 LED (10-40%), 1 LED Flashing (-10%)Charge Time: 5 HoursBurn Times: 1700 Lumens (1hr 40 mins), 850 Lumens (3hrs 20 mins), 400 Lumens (flashing) (7 hrs)Charging: Included USB Micro USB Charging Cable and PlugMounting: 31.8mm alloy handlebar mountWeight: 263g (including mount)Please Note: LifeLine are in the process of a rolling change on the mounts and changing the mount to a 31.8mm/ 35mm multi compatible mount that does not include the rubber shim.The side lights can be operated separately from the front light, using a button on the top of the unit, with the battery-level indicator situated nearby. The trio of LEDs also have a range of functions to suit the riding conditions and levels of visibility. With an integrated USB power bank letting you charge your cycle computer or mobile phone on the move, this is a versatile light to stay visible on every ride.
This Pro Fork Mount Workstand from Lifeline securely mounts your bike and enables you to rotate it and work from multiple angles. Plus, its adjustable height and rotating platform give you easy access to all areas of the bike to make every maintenance task easier and more convenient.360-degree Rotating PlatformPlanted tripod design for stabilityMulti Axle compatibility with axle suppliedQR lockoutsStainless Steel tubingCollapses for easy storageFolded: 94 x 20 x 14cmAssembled: Platform length 87cm, Maximum height 119cm (floor to platform), Floorspace (leg to leg) 100cm, Leg length: 67cmWeight: 5.6kgThis workstand mounts to your bikes fork dropouts to hold your ride upright and stable. It features a multi-axle compatible adjustable sliding jaw-mount to ensure you have a secure mount that s easy to move as required. With a 360-degrees rotating platform, this workstand enables you to position your bike to whatever position makes your task the easiest. It features a rigid and stable tripod design that s equipped with balancing cup-feet to ensure your pride and joy stays upright. And, this robust stand conveniently folds down for easy storage when not in use.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Dual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellRotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner lining17 air intakes for maximum airflowMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%.Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Dual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellRotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner lining17 air intakes for maximum airflowMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%.Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Dual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellRotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner lining17 air intakes for maximum airflowMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%.Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on.
The Truvativ Powerspline bottom bracket will only fit Truvativ 12 spline chainsets. This bottom bracket is intended for road or trekking use.