Wolf Tooth Limited Edition Remote Dropper LeverUtilising sealed cartridge bearings for a silky-smooth action and a low profile, this textured lever is machined to the highest quality. Compatible with all cable-actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Features: Use: MTB Dropper Post Compatibility: All cable-actuated dropper posts (see compatibility for more info) Clamp Diameter: 22.2mmTechnologies: Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Compatibility: Compatible with all cable actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Manufacturer's Part Numbers: WTREMOTECLMPBLU Blue Blue One Size 22.2mm WTREMOTECLMPPRP Purple Purple One Size 22.2mm WTREMOTECLMPRED Red Red One Size 22.2mm WTREMOTECLMPNI Silver Nickel One Size 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Limited Edition Remote Dropper LeverUtilising sealed cartridge bearings for a silky-smooth action and a low profile, this textured lever is machined to the highest quality. Compatible with all cable-actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Features: Use: MTB Dropper Post Compatibility: All cable-actuated dropper posts (see compatibility for more info) Clamp Diameter: 22.2mmTechnologies: Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Compatibility: Compatible with all cable actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Manufacturer's Part Numbers: WTREMOTECLMPBLU Blue Blue One Size 22.2mm WTREMOTECLMPPRP Purple Purple One Size 22.2mm WTREMOTECLMPRED Red Red One Size 22.2mm WTREMOTECLMPNI Silver Nickel One Size 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Limited Edition Remote Dropper LeverUtilising sealed cartridge bearings for a silky-smooth action and a low profile, this textured lever is machined to the highest quality. Compatible with all cable-actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Features: Use: MTB Dropper Post Compatibility: All cable-actuated dropper posts (see compatibility for more info) Clamp Diameter: 22.2mmTechnologies: Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Compatibility: Compatible with all cable actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Manufacturer's Part Numbers: WTREMOTECLMPBLU Blue Blue One Size 22.2mm WTREMOTECLMPPRP Purple Purple One Size 22.2mm WTREMOTECLMPRED Red Red One Size 22.2mm WTREMOTECLMPNI Silver Nickel One Size 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
These limited edition Wolf Tooth ReMote Dropper Levers in anodised colours are ergonomic, lightweight and easy to install. Utilising sealed cartridge bearings for a silky-smooth action and a low profile, textured lever machined to the highest quality, this is the ultimate dropper upgrade.Compatible with all cable actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Installation InstructionsCompatibility:Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. ,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best..Mounting Types:ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
Key Features:Compatible with all cable-actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.,If your post is not listed in the charts found in the image gallery, wolf tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the light action will work best. If it is less than 52mm, the standard remote will work best.Mounting types:,Remote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max..
Limited Edition - Orange – Standard Action ReMote. Available in Clamp fitment ONLY. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category. Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,. Compatibility: Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best..
Made with Yamamoto neoprene and using SCS (Super Composite Skin) Nano coating, the Zone3 Women’s Aspire Limited Edition Print Wetsuit is incredibly lightweight, flexible and fast. The SCS Nano coating reduces water-drag which allows you glide through the water with ease, while the coating also prevents the suit from absorbing water, avoiding unnecessary, excess weight. A single-piece shoulder and chest panel gives increased flexibility for every stoke, while the eco-friendly neoprene, obtained from limestone, provides more buoyancy than neoprene obtained from oil. The rear YKK zipper and the Pro Speed CuffsTM on the arms and legs, allow for the quickest of transitions, saving you vital time on a course. Designed for a natural feeling swim, this Aspire Wetsuit also provides excitement and style with the limited addition print and colourful detail. Cleaning: Rinse well in fresh water after every use. Do not wash with detergent or bleach. Do not put it in the washing machine or tumble dryer. Do not iron. Dry inside out first and then dry outside. Minimise time left in direct sunlight and aim to dry in the shade. Storage: Best kept flat and folded behind the knees and then in half, best stored in a cool place. Do not allow others to use your wetsuit. It has been fitted for your body shape and no body larger. Avoid contacting the velcro with the inside lining of the wetsuit.