This handlebar light mount is a genuine spare part from Ravemen that's compatible with handlebar diameters from 25.4mm to 35m and aero road handlebars. And it's designed for use with CR300, CR500 and PR600 front cycle lights.
Experience cycling in a whole new light. The Lifeline PAVO 1400 LUMEN MOTION high-powered light is designed to illuminate the roads and trails, so you can explore your favourite routes after the sun goes down. The precision lens and beam pattern give you a wide field of vision, while the high lumen CREE LEDs light up every rock, root and pothole in your path. Modes Constant Mode Constant Mode is indicated by the light's power button glowing blue. The light has 3 constant modes. Max output is 1100 Lumen in Constant mode. Motion Control Mode Motion Control mode is indicated by the lights power button glowing red. The light has 2 motion control modes and 1 flash mode. In motion control the lights lumen halves when the light comes to a standstill. Mode 1 MC= 1400L/ 700L Mode 2 MC= 700 L/ 350L Switching Between Constant and Motion Control Modes Press and hold the power button for 3 seconds to switch between constant mode and motion control mode. Run Time The maximum Run time is 2.5 Hours on Full Power. Please note: The helmet mount is sold separately.
Lumina OLED 1200 Boost The front light included in this set comes with the new NiteRider OLED screen that puts you fully in the driver’s seat – you can easily change between light modes and see your battery life in each changing mode. Easily switch between the nine different light modes including the ‘Boost’ mode which provides the ultimate in light perfect for extreme terrains when lighting conditions are at their darkest. The Lumina is USB rechargeable and comes with an integrated, quick-release bracket that will work with most handlebars types. Light Modes Mode One: 275 lumens – 6 hours Mode Two: 550 lumens – 3 hours Mode Three: 75 lumens – 18 hours Mode Four (Boost): 1200 lumens – 1 hours Mode Five (Flashing): 6.30 hours Mode Six (Flashing): 10 hours Mode Seven (Flashing): 18 hours Mode Eight (Flashing): 18 hours In the Box LED light head with OLED display Internal lithium-ion battery Handlebar clamp mounts (fits up to 35mm) USB charging cable Solas 250 The rear light in this set comes with 250 lumens of bright light output with a wide spreading beam that will keep you seen from multiple angles. The light also comes with a range of light outputs which can easily be toggled between by holding down on the power button. The modes include both flashing and constant as well as a ‘Group Ride’ mode that ensures you stay visible without blinding or distracting fellow riders. The rear light is also USB rechargeable for quick and easy charging on the go. Light Modes Mode One (Flashing): 6.30 hours Mode Two (Flashing): 4.30 hours Mode Three: 7.30 hours Mode Four (Group Ride): 40 hours In the Box LED tail light Seatpost mount USB cable
Featuring five high-intensity white LEDs and an 8000mAh/3.6V high-capacity rechargeable battery, the PR2400 is a high-performance bike light designed for riders who love night riding especially night trail riding. With a maximum of 2400 lumens output and user-friendly features such as OLED runtime display and wireless remote switch, the PR2400 will enhance your night riding experience to a whole new level and let you enjoy the thrill of night riding like you never did before! 2400 Lumens Front Cycle Light High/low beams optical design with five white LEDs and a maximum of 2400 lumens output; built-in high-capacity 8000mAh rechargeable Li-ion batteries. Anti-Glare Flood Beam for Road Cycling Special optical lens for the central LED to reduce glare for other road users and provide close-range wide floodlight and a long-distance spotlight for urban riding. HiLo Beam System for Mountain Biking A simulation to the design of automotive headlights with far-reaching high beam and wide low beam for all-terrain riding, whether it is for trail or gravel riding. OLED Runtime Display and Mode Indicators Display the remaining runtime of each brightness level instantly in an intuitive way and helps to select the ideal brightness level for different riding situations. Wireless Remote Switch Turn on/off the light and change brightness levels safely without releasing the grip; single click activates the maximum output for signaling or emergency lighting. Battery Runtime Extension Extend the runtime of the battery by connecting with an external power source for emergency lighting when the light is in low power, so no need to worry about being left in darkness! Type-C Input Port and Standard USB Output Port Type-C reversible connector to charge your light easily and no need to flip around for the correct orientation; USB output port to use the light as a power bank and to charge your digital devices when in need. Aircraft-Grade Aluminium Body and IPX8 Waterproof Design Solid and lightweight aluminium case with multi-fins for better heat dissipation performance; IPX8 waterproof design for heavy rain and muddy road cycling. Run Time: Road Cycling: High: 900-lumens; 3.4 hours run time Mid: 500-lumens; 5.5 hours run time Low: 300-lumens; 11.5 hours run time Eco: 100-lumens; 45 hours run time Rapid Flashing: 500-lumens; 20 hours run time Mountain Biking: High: 2400-lumens; 1.5 hours run time Mid: 1200-lumens; 2.4 hours run time Low: 600-lumens; 5.5 hours run time Emergency: Turbo: 2400-lumens
Compatibility NiteRider’s Taillight Strap Mount is compatible with the following NiteRider lights: Sentinel Solas Sabre Cherrybomb TL 5.0 (SL)
The Allpine Light Eco cleaner is a deep-cleaning, highly efficient and biodegradable bike cleaner that is formulated using pine oil - this superb bike cleaner is ideal for quick cleaning without the need to rinse using water afterwards. With its intense pine scent, Allpine Light is a biodegradable cleaner that will leave your bike clean and shiny. Its formula is very effective against dirt and does not require rinsing, making it ideal also for electric bikes (E-Bikes). Biodegradable Pine Oil Eco Bike Cleaner Allpine Light is harmless to the environment but very effective against dirt. After using it, you can get on a clean bicycle with a nice pine scent - a good way to start an epic ride. It is also ideal for E-Bikes since there is no need to rinse it away after cleaning. There are times when you are in a hurry and a quick cleaning is sufficient, or – especially for e-bikes - you want to limit the use of water close to electrical contacts. For these situations of moderate dirt, Allpine Light and a rag are enough to clean the bike, without the need to rinse with water. Use Without Rinsing: - Spray Allpine Light on a clean rag and wipe the entire frame - After cleaning, the surface will be shiny, with an anti-water and antistatic effect - As it does not contain silicone, it avoids that annoying sticky effect which is a real dust magnet. The surface thus treated also facilitates the flow of water - Note: Allpine Light does not remove the lubricant from the chain, so it is not necessary to relubricate it after such a cleaning - When the going gets tough, it doesn't hold back - If the bike is very dirty and / or muddy, you have to perform a serious cleaning Use With Rinsing: - Generously spray Allpine Light all over the bike - Wait a few minutes to let the product act - Rinse with plenty of water. A sponge or brush is recommended for an optimal result - Dry with a clean cloth. If needed, use more Allpine Light - without rinsing - to remove any streaks or traces of dirt - Lubricate the bicycle (chain, suspension, moving parts) after such a thorough cleaning
One of Tifosi’s most consistent performers, the popular Tyrant 2.0 has vented lenses to decrease fogging and the fully adjustable, slip resistant hydrophilic rubber arms and nose piece ensure a custom fit. Virtually indestructible Grilamid TR-90 nylon frames keep the Tyrant 2.0 lightweight but flexible, ready for anything. The Tyrant 2.0 comes equipped with Tifosi's most versatile Fototec Light Night photochromatic lens, with a Light Transmission range from 27.7% (fairly dark) - 75.9% (virtually clear) . Light Night is colour-neutral for zero colour distortion. Tifosi's Fototec lenses adjust rapidly to changing light conditions, utilising variable tint technology. Whatever the light condition, Fototec lenses enhance your performance and increase your comfort by supplying superior clarity and protection. Includes a zipped hardshell case and a microfibre cleaning pouch.
The Light and Dry Bivi Bag from Lifesystems is a lightweight reusable bag which helps to reflect and also retain over 90% of radiated body heat. This is ideal for endurance racers or outdoor enthusiasts and many more outdoor activities.
OLED Screen NiteRider’s Lumina 1200 front light comes with an OLED screen which gives you full operational control over your lighting. The screen lets you know what light mode you’re currently in and your battery life letting you know when to charge and when to adapt to a different light mode. Light Modes The light comes with a huge host of light modes which can easily be switched between to find the best possible light mode for your current lighting environment and battery life. Four of the modes have been specially designed for use during daylight hours to keep you seen all day and night. Mode One: 225 lumens light output – 6 hours battery life Mode Two: 450 lumens light output – 3 hours battery life Mode Three: 900 lumens light output – 1.30 hours battery life Mode Four: 70 lumens light output – 18 hours battery life Mode Five: 1100 lumens light output – 1 hour battery life Mode Six (Flashing): 6.30 hours battery life Mode Seven (Flashing): 10 hours battery life Mode Eight (Flashing): 18 hours battery life Mode Nine (SOS Flashing): 18 hours battery life USB Rechargeable For quick and easy charging on the go the light comes with a USB charging cable which allows you to charge the light from any standard USB port. The light also comes with NiteRider’s Intellicharge technology which reduces the light’s charge time by half for super quick charging. The light can therefore fully be recharged in just 3 hours. In the Box LED light head with OLED display Internal Li-ion battery Handlebar mount USB charging cable
USB Rechargeable NiteRider’s Lumina 1200 Boost comes with a Li-Ion battery that is rechargeable and comes with a USB charging cable. This allows you to quickly and easily charge the light via any standard USB port. The light comes with a battery light indicator which lets you know when it’s time to charge and with quick charge it takes just 3 hours to fully recharge the light with up to 18 hours of battery power. Light Modes The light comes with seven different light modes which can easily be switched between by using the top power button. This makes it easy to find the best lighting for your current environment and battery life. The modes range from solid and flashing with a daylight specific mode. Mode One: 275 lumens light output – 6 hours battery life Mode Two: 550 lumens light output – 3 hours battery life Mode Three: 1000 lumens light output – 1.30 hours battery life Mode Four: 1200 lumens light output – 1 hour battery life Mode Five (Flashing): 10 hours battery life Mode Six (Flashing): 6.30 hours battery life Mode Seven (Day Flash): 75 lumens light output – 18 hours battery life Mounting Integrated into the design of the light is an integrated mounting bracket that provides a rugged, secure handlebar attachment suitable for both on and off-road use. In the Box LED light head Internal Li-Ion battery Handlebar mount fits up to 35mm USB charging cable
Light Modes The light comes with six different light modes that can easily be switched between using the top power button. This allows you to find the best lighting for your current environment and your depleting battery life. The light modes include flashing and solid modes including a daylight flash mode. The light modes included are: Mode One: 7 hours battery life Mode Two: 6.30 hours battery life Mode Three: 7.30 hours battery life Mode Four: 6 hours battery life Mode Five: 4.30 hours battery life Mode Six: 30 hours battery life USB Rechargeable The Li-Po battery is rechargeable and comes with a USB charging cable that allows you to quickly and easily charges the light while you’re on the go from any standard USB port. The light takes just 2.5 hours to fully recharge with up to 30 hours of battery life. The light also comes with a battery light indicator so you know when it times to charge so you never get caught in a blackout situation. Mounting The light comes with a seat post mount that is fully adjustable and can be used to attach the light to aero and standard bars. The mount also allows you to easily take the light on and off the light in seconds which is excellent for commuters. In the Box LED tail light Seat post mount USB charging cable
The R2 front light comes with an impressive amount of light output to provide great vision in even the darkest of locations. Power Options The light comes with a backlit power switch that allows you to switch between 6 different power options dependent on the burn time you require. In the Box Energy status battery Bayonet fitting handlebar mount Helmet mount Head harness 1m extension cable