LifeLine Pavo 1800 Lumen Motion ABC Front LightExperience cycling in a whole new light. The Lifeline Pavo 1800 Lumen ABC Motion high-powered light is designed to illuminate the roads and trails, so you can explore your favourite routes after the sun goes down. The precision lens and beam pattern give you a wide field of vision, while the high lumen CREE LEDs light up every rock, root and pothole in your path.ModesThe Pavo 1800 Lumen ABC Motion Front Light has two modes: Constant/ Motion and ABC/Motion. The light has an accelerometer inside. When the light comes to a standstill in either mode it will reduce to 50% brightness. When the light moves again it will revert back to the setting it was previously in prior to motion mode activating. Switch between Constant/ Motion mode and ABC/Motion mode by holding the power button for 3 seconds with the light switched on.Constant / Motion ModeConstant/ Motion mode is indicated by the lights power button glowing blue. The light has 3 constant/ motion modes. Maximum output in Constant/Motion mode is 1800L.Ambient Brightness Control (ABC)/ Motion ModeABC/ Motion mode is indicated by the lights power button glowing red. The light has 1 ABC mode and 1 Flash mode. In ABC mode the light adjusts to the ambient brightness. In complete darkness the light will be exerting 100% output/ 1800L, in dusk conditions the light will be exerting 60% output/ 1000L and in light conditions the light will be exerting 30% output/ 500L.Run TimeThe maximum run time is 2.5 hours on full power.Features: Use: Road and Commute Modes: Constant/ Motion and ABC Motion Special Features: Motion Sensitivity Mode and Ambient Brightness Control Run Time on Full Charge: 2.5 Hours on Full Power Charge Time: 4.5 Hours Lumen: 1800 Certification: CE & UKCA Lens: Custom optical PMMA lens, 20 degree beam Battery Type: Li-ion, 3350 mah x 2 (6700 mah) What's in the Box: Light, Handlebar Mount (31.8 and 35mm compatible), USB C Smart Charger Weight: 219g / 257g with mountBuy LifeLine Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Compact and convenient for taking care of vital repairs in the workshop or by the roadside, this foldable and easily portable workstand from LifeLine provides a sturdy and secure hold on your bike. A must-have for essential bike maintenance.Maximum Stand Height: 175cmMaximum Leg Extension: 75cmMaximum Support Stand Extension: 22cmTool tray size: 20cm x 10cmMaximum Load: 30kgCompatibility: Bicycle frames from 25mm to 45mm tubingWeight: 7Kg (including the wheel stabiliser)Standing on four stabilised legs that fold out to a wide and highly-supportive base, this reliable workstand utilises a clamp head at the top of the unit to hold your frame in place. You can clamp your bike via the top tube or seatpost, rotating to the best angle for you to carry out your essential work. Extending to a maximum height of 175cm, the stand also features a handlebar and wheel stabiliser to keep everything as still as possible while you get the job done. Equipped with a magnetic tray to keep your tools and bits handy and contained, this superb workshop addition folds down to be easily stored in your garage, shop or car boot for last-minute pre-race tune-ups.
The LifeLine Workshop Prep holds your bike securely, making the job of cleaning and maintaining your bike easier than ever. The adjustable jaws feature clearance for cables making it easy to adjust gears and brakes while the bike is mounted in the stand. The shape of the jaws is specially designed to fit multiple tube shapes. The cam locking lever makes mounting the bike easy and allows adjustment of the clamping force to prevent damage t fragile frame tubes. The head is adjustable in all directions allowing for easy access to all parts of the bike.
LifeLine Workshop Workstand Wall MountLifeLine offer a comprehesive range of bicycle tools with quality built-in and at great value prices. Whatever job is looming be it maintenance or a rebuild, LifeLine have the equipment you need. A multi adjustable workstand head for direct mounting to a wall. The clamp is 450mm/17" from the bracket Buy LifeLine Workshop Prep Stand Wall Mount from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Bike Tool Kit - 37 PieceThis 37-piece LifeLine Bike Tool Kit offers a comprehensive range of durable bicycle tools at great value prices.Comprehensive Bike Tool KitThis Bike Tool Kit is an ideal addition to the cycling enthusiast's arsenal. If you're going to carry out essentail bicycle repairs or maintenance at home or on the road - yes, this LifeLine Bike Tool Kit is easy to transport - this bike tool kit has the tools you need.Features:Puncture Repair Kit: Rubber cement, sandpaper, 2 bits of rubber, 6 small, 2 medium, and 1 large patchChain Rivet Extractor: Compatible with MTB/road chains and some single speedsLarge Double-ended Headset Spanner: 30/32/36/40Double-ended Spanner: 8/10mm2 Double-ended Cone Spanners (Sizes): 13/14/15/16 x 2Spoke Key Ring: 3.3/3.5/3.2/13G/14G/15GBit and Socket Set Compatible with L Shaped Tool: Flat bladed screwdriver 5/7, Torx: T25/T30, Philips PH2/PH1, Socket 8/9/10 plus adaptorBall-ended Allen Key Set: 2/2.5/3/4/5/6/8/10Crank extractor toolChain whipShimano compatible External bb tool (HollowTech II)Shimano compatible crank cap removal tool (HollowTech II)15mm pedal wrench with 24mm hex in centreISIS bottom bracket toolCassette lockring remover tool3 tyre leversBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The LifeLine 37 Piece Tool Kit features a multitude of tools to accomplish a number of typical bicycle repair jobs. The combination of bottom bracket tools will allow you to work on both external and internal bottom brackets with an ISIS tool and Hollowtech II tool. If you are looking to maintain your own bike or wanting a mobile tool case to take on the road, the LifeLine 37 Piece Bike Tool Kit will become a firm favourite for accomplishing your maintenance. Full Kit List: Puncture repair kit: rubber cement, sandpaper, 2 bits of rubber, 6 small, 2 medium, 1 large patch Chain rivet extractor: compatible with MTB/road chains and some single speeds Crank extractor tool Large double ended headset spanner: 30/32/36/40 Shimano compatible external bb tool (Hollowtech II) Shimano compatible crank cap removal tool (Hollowtech II) Double ended spanner: 8/10mm 15mm pedal wrench with 24mm hex in centre 2 double ended cone spanners: sizes: 13/14/15/16 x 2 Chain whip Spoke key ring: 3.3/3.5/3.2/13G/14G/15G ISIS bottom bracket tool Cassette lockring remover tool 3 tyre levers Bit and socket set compatible with L shaped tool: Flat bladed screwdriver 5/7, Torx: T25/T30, Philips PH2/PH1, Socket 8/9/10 plus adaptor Ball ended Allen key set: 2/2.5/3/4/5/6/8/10
The LifeLine Headset Press Workshop Tool is high quality and helps to protect your finger, cups and frame on installs. The LifeLine Headset Press Workshop Tool is very simple to use and is a fantastic addition to your workshop.
LifeLine Pro Crown Race Setting ToolLifeLine offer a comprehesive range of bicycle tools with quality built-in and at great value prices. Whatever job is looming be it maintenance or a rebuild, LifeLine have the equipment you need.Includes: Setting Tube with One 1.5" setting insert for installing the crown race used on 1.5” headsets Use a hammer and tap the end cap on the tube to seat the race into its proper place.Buy LifeLine Crown Race Setting Tool from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro Crown Race Setting ToolLifeLine offer a comprehesive range of bicycle tools with quality built-in and at great value prices. Whatever job is looming be it maintenance or a rebuild, LifeLine have the equipment you need.Includes: Setting Tube with One 1.5" setting insert for installing the crown race used on 1.5” headsets Use a hammer and tap the end cap on the tube to seat the race into its proper place.Buy LifeLine Crown Race Setting Tool from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Go-Through Socket Set (34 Piece)The LifeLine Pro 34 piece Go -Through socket set is a great value, professional quality and high performance tool set which has been selected specifically for the Bicycle workshop. The Go-Though sockets remove the need for deep section sockets as the hollow centre will allow long items to pass through and stay out of the way.The comprehensive set comes complete in a robust plastic carry case, which will protect them from damage, help you keep them in order and prevent you from loosing any!Features: Manufactured from Chrome Vandium Steel High Polish Finish 1/4” Drive Go-Through ratchet handle with rotation adjustment lever, 48T ratchet for super fast engagement and dual density rubber handle for excellent durability, comfort and grip. 3/8” Drive Go-Through ratchet handle with rotation adjustment lever, 48T ratchet for super fast engagement and dual density rubber handle for excellent durability, comfort and grip. 1/4” to 1/4" Coupler which allows ratchet to be used with LifeLine Pro Ratchet wrench fittings 13 x 1/4" Go-Through sockets - 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm 13 x 3/8" Go-Through sockets - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm 1/4” - 75mm extension bar 3/8” - 75mm extension bar 1/4” Go-Through to 1/4” Adapter with Quick Release 3/8” Go-Through to 3/8” Adapter with Quick Release 3/8” Go-Through to 1/2” Adapter with Quick Release Blow moulded plastic carry case Buy LifeLine Products from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine AirBlast Tubeless Tyre Track Pump Built to enable you to "pop inflate" tubeless tyres onto your wheel rims, the AirBlast Tubeless Tyre Track Pump from Lifeline will get you back on the trails or road in no time. To perform the fast inflate you simply close a valve and pump it up to a maximum of 240psi (or your tyre/rim's maximum rating), then release the valve to "seat" the tyre. You can then deflate the tyre back down to your preferred riding pressure.This track pump is made of durable alloy and features an auto-select head that is compatible with Presta and Schrader valves and an easy to read top mounted pressure gauge.Features:Durable alloy constructionStores pressurised air to pop inflate tubeless tyres Top mounted gauge for easy readingAuto select head for either Presta or Schrader valves Max pressure: 240psi Dimensions: H: 68cm; W: 25cm; D: 17cm Weight: 2.27kg Please Note: Please do not exceed the maximum pressure rating on your tyre's sidewall or wheel's rimBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The LifeLine Airblast track pump eliminates the mess and stress of seating a tubeless tyre; fit the valves, fit the tyre onto the rim and add sealant. Then, simply mount the head on the valve, charge the pressure reservoir with 240PSI and flip the switch to release a rapid burst of air that pushes the entire tyre bead against the rim and forces sealant into any gaps. The LifeLine Airblast track pump also includes a great set of features for regular track pump operation; a precision top-mounted pressure gauge for easy reading, a wide robust base for stable operation and a switchable CNC alloy head for presta /Schrader compatibility.