We like to ride our bikes and we like to explore. We believe you don't need to pay over the odds for the privilege and so we created the Lifeline Adventure Series of bags- maximising quality and design at a sensible price. The bags are made from a Lightweight 300D Polyester Ripstop with TPU coating and feature a fully welded construction. The Adventure Pannier Bag has a rolltop closure that clips down on either side of the bag. A zip pocket at the front allows you to stash essentials that you need easy access to. The easy pull zip and reflective puller help with gloved access and the zip garage provides added protection from the elements. The bag has a 3 point mount system. The top mounts open and close as you lift and lower the carry handle and the third mount secures to the lower of the rack, keeping the bag firmly in place. Reflective panels at the sides of the bag provide extra visibility and webbing provides a mount for additional lighting. The bag offers a generous 22 Litre storage allowing you to almost pack the kitchen sink!
We like to ride our bikes and we like to explore. We believe you don't need to pay over the odds for the privilege and so we created the Lifeline Adventure Series of bags- maximising quality and design at a sensible price. The bags are made from a Lightweight 300D Polyester Ripstop with TPU coating and feature a fully welded construction. The Adventure Seat Pack attaches like a traditional saddle bag with straps under and over the saddle rails and then a stabilising large retaining strap around the seat post. The bag has a generous maximum volume of 7.5 litres and can be rolled down should you wish to ride with a smaller load. The maximum length is 63cm, providing a generous pack for your adventure essentials. There are webbings on the upper and lower of the tail allowing you to attach lights and a pair of flip flops! The robust hypalon staps are sized to minimise 'on the bike' interference, but maximise the stability of the bag- wide strap mounting to the seat post and narrower straps for the saddle rails. We packed ours with a pair of shorts, socks, a t-shirt, pair of boxers, toothbrush and a lightweight towel
Brightness is key for daylight riding and the Lifeline Daylight Visible Rear Bike Light has a 38 chip COB LED providing a blaze of illumination. This coupled with a purposefully disruptive flash pattern make the Lifeline light a great partner on the road. With 7 modes to choose from the rider can balance the road and light conditions against the most appropriate illumination. The light is Micro USB Rechargeable taking 2 hours to achieve a full charge. The light can be post or helmet mounted and comes with both a post mount bracket (fits 19-32mm dia) and a velcro helmet strap. Burn times are as per below: High Beam (1.5HRs), Low Beam (4.5HRs), Flash 1 (20HRs), Flash 2 (5HRs), Flash 3 (7.5HRs), Flash 4 (15HRs), Daytime Flash (8HRs). Need to know how much battery is remaining? Simply double click on the light to show the remaining capacity. A constant light indicates 100-50% battery remaining, a slow flash indicates 49-25% and a fast flash tells you there's less than 24% battery remaining.
LifeLine Professional Bar Tape is supplied with everything you need for a fresh feel and added ventilation on the flats and drops. The gel component helps absorb the shock transmitted from uneven road surfaces and distributes pressure more evenly across your hands. The set includes two 200cm rolls to accommodate longer bars, 2 strips for an even profile under the hoods and two custom LifeLine end plugs.
We like to ride our bikes and we like to explore. We believe you don't need to pay over the odds for the privilege and so we created the Lifeline Adventure Series of bags- maximising quality and design at a sensible price. The bags are made from a Lightweight 300D Polyester Ripstop with TPU coating and feature a fully welded construction. The Adventure Top Tube Bag has a reinforced base and features a reflective Lifeline graphic. The easy pull zip and reflective puller helps with 'on the move' access. The zip garage provides added protection from the elements. The robust hypalon staps are sized to minimise 'on the bike' interference, but maximise the stability of the bag - wide strap mounting to the top tube and narrower strap for the head tube. A cable entry/ exit point at the head of the bag allows for on the go charging. We packed ours with a phone (Huawei P Smart 7.5cm x 16cm), a small bag of trail mix, keys, high5 gel and a bit of cash
We like to ride our bikes and we like to explore. We believe you don't need to pay over the odds for the privalege and so we created the Lifeline Adventure Series of bags- maximising quality and design at a sensible price. The bags are made from a Lightweight 300D Polyester Ripstop with TPU Coating and have a fully welded construction. The Adventure Frame Bag mounts to the underside of the top tube and sits at the front of the bike. Its big enough to be useful and yet small enough to allow a 600ml water bottle to retain it's place on your downtube. The bag features a reflective Lifeline graphic and an easy pull zip and reflective puller helps with 'on the move' access. The zip garage provides added protection from the elements. A cable entry/ exit point at the head of the bag allows for on the go charging. The robust hypalon staps are sized to mimimise 'on the bike' interference, but maximise the bags stability- wide strap mounting to the top tube and narrower strap for the down tube. We packed ours with a pair of overshoes, a rain jacket, some hydration tabs, a compass and a few snacks!
Ideal for commutters or long distance riders the grips are 136mm wide and 51mm at their deepest point. The grips combine a hard plastic inner with a rubber/gel outer. The outer of the grip feature a microtech texture with embossed cross hatching- putting grip in the right places and minimising unneccessary friction. The closed end construction removes the need for bar end plugs. The anodised laser etched clamp and bolt allow the rider to secure the grips firmly in place. For a shallower option, check out the Lifleline Shallow Palm Comfort Ergo Grips.
Ideal for commutters or long distance riders the grips are 131.6mm wide and 41mm at there deepest point. The grips combine a hard plastic inner with a rubber/gel outer. The outer of the grip feature a microtech texture with embossed cross hatching- putting grip in the right places and minimising unneccessary friction. The closed end construction removes the need for bar end plugs. The anodised laser etched clamp and bolt allow the rider to secure the grips firmly in place. For a deeper option, check out the Lifleline Deep Palm Comfort Ergo Grips.
Full-length mudguards offer the maximum in protection from standing water keeping both you and your bike clean and dry even in the worst conditions. The LifeLine Wide Mudguard Set features a PET/Aluminium construction with steel wire stays making them lightweight and flexible. The PET/Aluminium construction is also extremely durable and resistant to corrosion and damage from UV light. Plastic scratch guards on the ends of the mudguard blades provide additional protection. Fully adjustable stays ensure a perfect fit, preventing rattles or fouling on any other components. Low profile stay ends reduce the chances of catching your foot when cornering. The LifeLine Wide Mudguard Set is compatible with caliper or disc brakes and comes complete with full installation instructions and all mounting hardware. Please Note: These mudguards are designed to fit bikes with 700c wheels but the metal stays may require cutting with a hacksaw or heavy-duty wire cutters during fitting. The scratched stock option in the dropdown menu has a small mark on the rear mudguard. This is cosmetic only and does not affect the structural integrity of the mudguard.
Experience cycling in a whole new light. The LifeLine PAVO MOTION high powered light range is designed to illuminate the roads and trails, so you can explore your favourite routes after the sun goes down. The precision lens and beam pattern give you a wide field of vision, while the high lumen CREE LEDs light up every rock, root and pothole in your path. Motion Control brings new technology to the Pavo range. The light is fitted with a gyroscope which senses movement. When the light or bike comes to a standstill, the power output halves. This is ideal for commuters that have a stop-start journey or if you're out on the trails and you're taking a break. If you don't want to use Motion Control then simply hold the power button down to toggle back to constant mode. Burn Times/Battery Life and Outputs: 1Hr 50mins burn time at 2000 Lumens 3Hrs 30 mins (1000 Lumens) 6Hrs 30 mins (500 Lumens) 12Hrs (250 Lumens) 16Hrs+ (Flashing) CONSTANT MODE: Constant mode is indicated by the lights button glowing blue. The light has 4 constant modes. High = 100% / 2000 L Medium = 50% / 1000 L Low = 25% / 500 L Saving Mode = 10% / 250 L MOTION CONTROL MODE: Motion control mode is indicated by the lights button glowing red. The light has 3 motions control modes. 2 flash modes follow the last motion control mode. In motion control the lights lumen halves when the light comes to a standstill thereby prolonging the battery life. Mode 1 MC = 2400 L / 1200 L Mode 2 MC = 1200 L / 600 L Mode 3 MC = 600 L / 300 L SWITCHING BETWEEN CONSTANT AND MOTION CONTROL MODES: Press and hold the power button for 3 seconds to switch between constant and motion control mode. Please note: LifeLine are in the process of a rolling change on the mounts and changing the mount to a 31.8mm/ 35mm multi compatible mount that does not include the rubber shim.
The LifeLine Essential Narrow Road Clip-On Rear Mudguard fixes quickly and easily to your seatpost to provide protection from muck and spray from the rear tyre. A selection of shims allow the LifeLine Essential Narrow Road Clip-On Rear Mudguard to fit a variety of seatpost diameters from 25.4mm to 31.8mm. A thumb wheel adjuster allows for easy angle adjustment on the fly.
Easy to use and prevent brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor. Follow the simple steps below: 1) Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side. 2/ Insert the Caliper Alignment Tool between the pads and the rotor. 3) Pull the brake lever- focing the pads against the alignment tool and in turn against the rotor 4) While still holding on to the brake lever, tighten the bolts on the brake caliper. 5) Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either side.