Instructions for proper use: Unwind the handle to make room for the chain to be fitted to the tool Unwind the adjustable support screw at the rear of the tool Place the chain on the rear teeth of the tool (nearest the adjustable support) Tighten the adjusting support screw until it comes firmly into contact with the back of the chain Tighten the handle of the tool gently until the tool pin comes into contact with the centre of the chain pin If the two pins are not lined up, back off the handle and re-position the chain in the tool (repeat until the two pins are aligned) Now firmly tighten the handle to push the pin out, splitting the chain
The LifeLine 18 in 1 Multi-Tool with Co2 Inflator features the following tools: - Chain Tool with Retaining Hooks to secure the chain as you split or repair it - Press- on Co2 Inflator, compatible with presta and schrader valves - 2/4/5/6/8MM Hex Keys - Phillips and Flat head screwdrivers - Torx T25 and T30 Tools - 10MM Open Wrench - 3.23/ 3.33/ 3.45/ 3.96 Spoke Wrenches - Mavic® compatible Spoke Wrench
We like to ride our bikes and we like to explore. We believe you don't need to pay over the odds for the privalege and so we created the Lifeline Adventure Series of bags- maximising quality and design at a sensible price. The bags are made from a Lightweight 300D Polyester Ripstop with TPU Coating and have a fully welded construction. The Adventure Frame Bag mounts to the underside of the top tube and sits at the front of the bike. Its big enough to be useful and yet small enough to allow a 600ml water bottle to retain it's place on your downtube. The bag features a reflective Lifeline graphic and an easy pull zip and reflective puller helps with 'on the move' access. The zip garage provides added protection from the elements. A cable entry/ exit point at the head of the bag allows for on the go charging. The robust hypalon staps are sized to mimimise 'on the bike' interference, but maximise the bags stability- wide strap mounting to the top tube and narrower strap for the down tube. We packed ours with a pair of overshoes, a rain jacket, some hydration tabs, a compass and a few snacks!
The LifeLine Spanner Set features a heavy duty roll mat which can be fixed in place on a shadow board in a professional or home workshop. The LifeLine Spanner Set is nothing short of essential for any mechanic.
With its stretch fit and breathable construction, the Ronhill Women’s Life Balance Tank is ready to move. It might be the deep stretching movements of a yoga session or the high-intensity efforts of a circuits class, this is a tank top that lets you enjoy excellent mobility. It's also adept at dealing with the sweat build-up of your more intense workout sessions. But if you want to just relax, it's a comfy top to throw on too.
LifeLine Pro Chain Rivet Extractor The LifeLine Pro Chain Rivet Extractor is a must for every home mechanic. Constructed from heavy duty steel with strong rubberised grips, this chain tool is ideal for removing chain pins with complete confidence.Features: Durable steel construction Oversized plastic handles for grip and comfort Comes with one replacement splitting pin Adjustable chain support screw prevents damage to the chain and the tool Suitable for all chains from single-speed to derailleur type (5 - 11 speed) Adjustable locking barrel can be used to prevent pushing the chain right through and out the other side Instructions for proper use: Back off the handle to make room for the chain to be fitted to the tool Back off the adjustable support screw at the rear of the tool Place the chain on the rear teeth of the tool (nearest the adjustable support) Tighten the adjusting support screw until it comes firmly into contact with the back of the chain Turn the handle of the tool gently until the tool pin comes into contact with the centre of the chain pin If the two pins are not lined up, back off the handle and re-position the chain in the tool Repeat steps 5 and 6 until the two pins are aligned Now firmly tighten the handle to push the pin out, splitting the chain You can use the locking barrel to prevent pushing the chain pin right out of the other side. This makes it much easier to join a chain and push the pin back in again. (Note that you can only do this on certain types of chain - Check with the manufacturer for details) The only time you would use the front teeth on the tool is to loosen a tight link slightly - If you try to split a chain using them, you will break them off Buy LifeLine Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Spanner Set The LifeLine spanner set is a workshop quality spanner set manufactured from chrome vanadium and comprises of 8 spanners ranging from 8mm to 16mm. The spanners have one open end and one ring end and come complete inside a heavy duty roll mat for safe keeping. Features: Included spanners, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm 8 piece chrome vanadium Buy LifeLine Products from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Headset Cup Remover An ingenious solution for the removal of headset cups without the need for expensive headset presses. Secure your frame in a bike stand and place the open end inside the head tube and hammer the cups out. A simple yet highly effective method that will save you both time and money. Features: Fits 1.1/8" Only Buy LifeLineProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro 18-In-1 Multi ToolHave versatility at your fingertips with the 18-In-1 Multi-Tool with CO2 Inflator. The perfect all-rounder, this essential piece of kit keeps your ride stress-free and allows for an immediate fix should something go wrong. With maintenance taken care of, focus all of your energy on the path ahead.Features: Chain tool with retaining hooks Press- on CO2 Inflator 18 Essential cycle maintenance/ repair tools Magnetic wrench retainer Chain Tool with Retaining Hooks to secure the chain as you split or repair it Press- on Co2 Inflator, compatible with presta and schrader valves 2/4/5/6/8MM Hex Keys Phillips and Flat head screwdrivers Torx T25 and T30 Tools 10MM Open Wrench 3.23/ 3.33/ 3.45/ 3.96 Spoke Wrenches Mavic compatible Spoke Wrench Weight: 120gBuy LifeLine from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Thru Axle Adaptor (TT-02)The Lifeline TT-02 Thru Axle Adaptors allow you to convert the LifeLine TT-02 Fluid Turbo Trainer to thru axle compatibility.The adaptor kit consists of a replacement axle cup (to fit to the trainer) and a thru axle. Note there are 3 different thread pitches of thru axle available and so please check your current thread pitch. The axles are compatible with 142mm hub spacing only. Unscrew the 'axle cup' from the turbo trainer and replace this with the TT-02 Thru Axle Adaptor. Features: Convert you TT-02 Fluid Turbo Trainer to thru axle compatibility 12 x 142mm hub spacing Compatible with with LifeLine TT-02 Fluid Turbo TrainerBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Tested both in the laboratory and by our recent expedition to Baffin Island these are highly efficient insulating vacuum flasks.The Vacuum is created from a heating and cooling manufacturing process that is more reliable than many other flask designs.Features● Keep drinks hot for up to 8 hours or cool for 24 hours● Thermally induced vacuum for optimum performance● Stainless steel construction with copper coated inner wall● One-touch and screw-in stoppers provided with each flask● Sleek design with lid that can be used as a cup● Conforms to British Standards for quality and safety 0.7 L 75 x 75 x 285 mm 503g
The X-Tools chain splitter pro is a workshop quality tool which will withstand constant use and abuse. A must have for any bike shop or mechanic.