The Lifeline brake hose kits are replacement kits for hydraulic brakes. Choose the kit you require depending on the brake that you have. All hoses are constructed from a high tenacity braided yarn. There are several options to choose from the menu for this brake hose kit. Please see the below details for more information on each kit: Spec 1- Shimano Straight- Straight Kit- road bikes and entry level MTB with Shimano brakes. 3M x Black Hose- ID=2.1mm/ OD= 5mm 2 x M9 Flange Nuts (for road lever) 2 x M8x0.75 Stainless Nuts (MTB lever end or Road caliper end) 2 x M8x0.75 Forged Nuts 4 x Stainless Inserts 4 x Copper Olive Spec 2- Shimano Straight- 90 Degree Kit- regular MTB bikes with Shimano brakes. 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Copper Olive Spec 3- Avid/SRAM Straight- 90 Degree Kit- Fitment for SRAM Guide Ultimate fitment and Level (remove banjos) 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded Olives Spec 4- Avid/SRAM Straight- Straight Kit- Fitment for SRAM Guide R, RS, RSC 1.8M x Black Hose with M6 male adapter pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with male adapter pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded Olives Spec 5- Avid/SRAM Straight- 90 Deg Kit MONOBLOCK- Fitment for SRAM Code, Red & Force 1.8M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Alloy Threaded Olives Spec 6- Tektro Straight- Straight Kit 1.8M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 1M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 2 x M8x0.75 Forged Nuts 2 x Copper Inserts 2 x Copper Olives
The pack is 100% waterproof with taped seams and closed zip. Stash your essentials - tube, cartridge and inflator, multitool, levers
Made from 300D Polyester Ripstop with TPU coating, the bag is hard-wearing and 100% waterproof. The bag attaches securely to your seat post and saddle rails - seat post via the wide velcro strap and saddle rails through the buckles on either side of the bag. The lashings on the top face of the bag allow for additional external attachments. The roll-top closure is simple and effective allowing you to shrink the bag down when you're not utilising the full capacity.
Pro-quality bottom bracket cup removal tool from LifeLine.
Plus, it's made from heat-treated steel for maximum strength and reliability. Compatability is only confirmed for offical Shimano components. The tool may not work when alternative brand chainring spiders are installed.
The tool is also fully compatible with any fork which requires a cassette tool for the top cap removal like the current RockShox range.
Sizes supplied in this set are 7mm, 8mm and 10mm. Compatible with any 1/4” drive wrench.
The tool case is made from a toughened plastic and has a sheet brushed stainless steel outer. Inside the case has a tool tray allowing you to keep your essentials easily accessable. The case weights 1.87KG and has external dimensions of 46cm x 19.5cm x 20.5cm. (note the tools shown in the images are not included with the toolbox)
Feed the guide cable through your frame using the magnet on your multi tool and the magnet on the guide cable to pass from exit to insert point. Then attach the correct asaptor from the multi tool to your cable that requires routing. Attach the magnet adaptor to this cable and connect the guide cable to the routing cable. Then simply drag the routing cable back through the frame by pulling on the guide cable. Sound tricky? It's really not. Check out the instructions added to the images and soon we'll make a video demonstrating how to use the tool!
Suited to all modern wheel sizes from 14" kids wheels up to 29" MTB and 700c road wheels.
This genuine LifeLine workshop-quality hose cutter features a spring-loaded mechanism and a lock for a combination of comfortable ergonomics and safety when not in use.
Each pack contains 3 x 400mm tubes. Two diameters are available, 5mm inner/ 8mm outer and 6mm inner/ 11mm outer.