The ORI 1700 Lumen is the 'swiss army knife' of bike lights! The central LED runs at a maximum 1000 lumen. The two side LEDs then offer 350 lumens each. All three LEDs at full power give you a 1700 lumen brightness and 1hr 40 burn time. The front and side lights can be operated independently. The larger button controls the front beam, the smaller button controls the side beams. The panel on top shows you your remaining battery level The central beam has 4 functions- Full Beam (1000 lumens), Medium (500 lumens), Low (200 Lumens) and Strobe. The side beams also have 3 functions- Full Beam (700 lumens), Medium (350 lumens) and Flashing (200 lumens). A really nice feature of the light is that you can keep the central beam static and have the side lights on a flash - thereby giving yourself enough light to see where you're going but also notify other road users with the flash. The USB power bank is an added bonus. Accessed at the rear of the light. charge your phone or your Garmin for example and make that call or find the route again. Please note: LifeLine are in the process of a rolling change on the mounts and changing the mount to a 31.8mm/ 35mm multi compatible mount that does not include the rubber shim.
Consisting of 5 tailor shaped pads, each pad is designed specifically to protect your bicycle. Similar to an air mattress simply unscrew the valve, the pads will partially self inflate, then blow in to top up. Protect your wheels with the 2 wheel pads. Protect the front of the bike with the fork pads Protect the top of the bike with a pad specifically designed to wrap around the bars, cockpit and saddle Proected the rear of the bike with a pad specifically designed to attach at your seat post, run down your seat tube, over your seat stays and cover the rear mech.
Create a smoother energy and recovery shake drink with the Lifeline Nutrition Shaker Bottle. The metal whisk ball enhances mixing to ensure an even consistency throughout. A side measure scale helps you to accurately mix your nutrition drink.
See the compatability chart in the images for specific brake caliper and lever fitment. The kit includes 8 nipple adaptors. Each nipple adaptor is specific to the brake caliper and lever and so please refer to the chart to check the required fitment. Compatatiblity has been checked and confirmed with the following brakes: Avid Code/ XO SRAM Guide Series/ Level Shimano Formula R1, C1,TheOne Hope X2/ E4 & V4 Magura MT Series (2,4,5,6,7,8)/ Louise Hayes El Camino/ Stroker Ryde/ Sole At the moment the kit is not compatible with TRP Quadium, TRP Slate, Formula Cura and Hayes Dominion A2/ A4. Please note: For the newer models of SRAM brakes with a Bleeding Edge port you will also require the LifeLine SRAM Bleeding Edge Brake Bleed Adaptor
You simply clamp the hydraulic hose in place and then drive the barb into place with this Pro Hydraulic Hose Needle Driver.
Easy to use and prevent brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor. Follow the simple steps below: 1) Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side. 2/ Insert the Caliper Alignment Tool between the pads and the rotor. 3) Pull the brake lever- focing the pads against the alignment tool and in turn against the rotor 4) While still holding on to the brake lever, tighten the bolts on the brake caliper. 5) Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either side.
The LifeLine Essential Narrow Road Clip-On Rear Mudguard fixes quickly and easily to your seatpost to provide protection from muck and spray from the rear tyre. A selection of shims allow the LifeLine Essential Narrow Road Clip-On Rear Mudguard to fit a variety of seatpost diameters from 25.4mm to 31.8mm. A thumb wheel adjuster allows for easy angle adjustment on the fly.
Experience cycling in a whole new light. The LifeLine PAVO MOTION high powered light range is designed to illuminate the roads and trails, so you can explore your favourite routes after the sun goes down. The precision lens and beam pattern give you a wide field of vision, while the high lumen CREE LEDs light up every rock, root and pothole in your path. Motion Control brings new technology to the Pavo range. The light is fitted with a gyroscope which senses movement. When the light or bike comes to a standstill, the power output halves. This is ideal for commuters that have a stop-start journey or if you're out on the trails and you're taking a break. If you don't want to use Motion Control then simply hold the power button down to toggle back to constant mode. Burn Times/Battery Life and Outputs: 1Hr 50mins burn time at 2000 Lumens 3Hrs 30 mins (1000 Lumens) 6Hrs 30 mins (500 Lumens) 12Hrs (250 Lumens) 16Hrs+ (Flashing) CONSTANT MODE: Constant mode is indicated by the lights button glowing blue. The light has 4 constant modes. High = 100% / 2000 L Medium = 50% / 1000 L Low = 25% / 500 L Saving Mode = 10% / 250 L MOTION CONTROL MODE: Motion control mode is indicated by the lights button glowing red. The light has 3 motions control modes. 2 flash modes follow the last motion control mode. In motion control the lights lumen halves when the light comes to a standstill thereby prolonging the battery life. Mode 1 MC = 2400 L / 1200 L Mode 2 MC = 1200 L / 600 L Mode 3 MC = 600 L / 300 L SWITCHING BETWEEN CONSTANT AND MOTION CONTROL MODES: Press and hold the power button for 3 seconds to switch between constant and motion control mode. Please note: LifeLine are in the process of a rolling change on the mounts and changing the mount to a 31.8mm/ 35mm multi compatible mount that does not include the rubber shim.
Full-length mudguards offer the maximum in protection from standing water keeping both you and your bike clean and dry even in the worst conditions. The LifeLine Wide Mudguard Set features a PET/Aluminium construction with steel wire stays making them lightweight and flexible. The PET/Aluminium construction is also extremely durable and resistant to corrosion and damage from UV light. Plastic scratch guards on the ends of the mudguard blades provide additional protection. Fully adjustable stays ensure a perfect fit, preventing rattles or fouling on any other components. Low profile stay ends reduce the chances of catching your foot when cornering. The LifeLine Wide Mudguard Set is compatible with caliper or disc brakes and comes complete with full installation instructions and all mounting hardware. Please Note: These mudguards are designed to fit bikes with 700c wheels but the metal stays may require cutting with a hacksaw or heavy-duty wire cutters during fitting. The scratched stock option in the dropdown menu has a small mark on the rear mudguard. This is cosmetic only and does not affect the structural integrity of the mudguard.
Ideal for commutters or long distance riders the grips are 131.6mm wide and 41mm at there deepest point. The grips combine a hard plastic inner with a rubber/gel outer. The outer of the grip feature a microtech texture with embossed cross hatching- putting grip in the right places and minimising unneccessary friction. The closed end construction removes the need for bar end plugs. The anodised laser etched clamp and bolt allow the rider to secure the grips firmly in place. For a deeper option, check out the Lifleline Deep Palm Comfort Ergo Grips.
Ideal for commutters or long distance riders the grips are 136mm wide and 51mm at their deepest point. The grips combine a hard plastic inner with a rubber/gel outer. The outer of the grip feature a microtech texture with embossed cross hatching- putting grip in the right places and minimising unneccessary friction. The closed end construction removes the need for bar end plugs. The anodised laser etched clamp and bolt allow the rider to secure the grips firmly in place. For a shallower option, check out the Lifleline Shallow Palm Comfort Ergo Grips.
We like to ride our bikes and we like to explore. We believe you don't need to pay over the odds for the privalege and so we created the Lifeline Adventure Series of bags- maximising quality and design at a sensible price. The bags are made from a Lightweight 300D Polyester Ripstop with TPU Coating and have a fully welded construction. The Adventure Frame Bag mounts to the underside of the top tube and sits at the front of the bike. Its big enough to be useful and yet small enough to allow a 600ml water bottle to retain it's place on your downtube. The bag features a reflective Lifeline graphic and an easy pull zip and reflective puller helps with 'on the move' access. The zip garage provides added protection from the elements. A cable entry/ exit point at the head of the bag allows for on the go charging. The robust hypalon staps are sized to mimimise 'on the bike' interference, but maximise the bags stability- wide strap mounting to the top tube and narrower strap for the down tube. We packed ours with a pair of overshoes, a rain jacket, some hydration tabs, a compass and a few snacks!