SRAM Level Mountain Bike Disc Brake and RotorSRAM's Level MTB Disc Brake + Rotor may fall into the more budget range of brakes, but it still manages to pack a punch, as it features most of the same technologies as their higher end Downhill/Enduro "Guide" brakes. Ideal for Cross-Country and trail use, it benefits from technology such as an expandable bladder and TPC Plus. Features: Body Material: Aluminium Lever Material: Aluminium - Stamped Caliper Design: 2-piston monoblock caliper Recommended Rotor type: 1-piece G2 CleanSweep Pad: Steel-backed organic Fluid: DOT 5.1 Mount: Ambidextrous Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust Special Features: Contact Point Adjust, Piggyback Reservoir, DOT 5.1 fluid Technology Highlight(s): TPC Plus, DirectLink Pad/Holder: Top-loading Intended Use: XC/Trail Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: Yes Stainless Hardware: Yes Weight: 430gTechnologies:DirectLinkSRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control.PiggyBack Reservoir:The brake fluid reservoir on SRAM’s latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement-so you can switch your levers on the handlebar and run them moto style without hassle.Expandable Bladder SRAM’s new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. TPC Plus (Timing Port Closure):A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port to pressurise the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.DOT 5.1Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Level TLM Mountain Bike Disc BrakeThis championship-winning disc brake is ready to take all the abuse you want to give it out on the trails. It puts proven SRAM braking performance at your fingertips thanks to its sleek, lightweight design that's specially optimised for XC and light trail use. Additionally, it delivers power and modulation via its robust alloy lever blade, DirectLink actuation, DOT 5.1 fluid and a two-piston monoblock caliper. Furthermore, this superb design provides you with superior heat management for consistent, fade-free braking ride after ride.Features: Lever Material: Forged Aluminium Hardware Material: Stainless Steel Use: MTB, XC Caliper: 2-piston Fluid: DOT 5.1 Adjustment: Tooled reach adjust System: Open system Pad/Holder: Top loadingTechnologies: Bleeding Edge: Bleeding Edge technology makes bleeding brakes quick and simple. An updated fluid path and bleed porting make it easier to push fluid through the caliper. A dedicated bleed adapter plugs into the bleed port and seals the system to minimize air contamination and fluid loss. DirectLink: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake It offers a no-nonsense solution to give you precise control. DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. We found that in our systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. Expandable Bladder: SRAM's new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. Heat Shield: The stainless steel heat shields breaks the thermal connection between the pad and caliper body, reducing caliper fluid temperature by about 20C even in the most extreme testing conditions. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker X integrates the RockShoxXLoc and is compatible with XX and X0 brakes. Standard Matchmakeris also available and works with any split-clamp design and RockShox PushLoc. PiggyBack Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Level TLM SJ Disc BrakeThe SRAM Level TLM SJ Disc Brake has a championship-winning pedigree and is ready to provide exceptional braking power and reliability anywhere on the mountainside, in all weather conditions.Level TLM puts proven SRAM braking performance and consistency at your fingertips, in a sleek, lightweight design optimized specifically for cross-country and light trail use. Power and modulation are delivered via the Level TLM’s alloy lever blade, DirectLink actuation, DOT 5.1 fluid and SRAM's Level two-piston, monoblock caliper. The design provides superior heat management for consistent, fade-free performance all day long, and Bleeding Edge technology makes maintenance incredibly simple, so your brakes feel great all day - every day.Lightweight and Durable Caliper DesignIncorporates technologies developed on Guide Ultimate’s S4 caliper Moly-coated aluminium pistons for consistent rollback and easy set-up New seals, gland geometry and piston coating for improved rollback, results in easier setup and improved consistency Heat Management: piston insulators and Heat Shield reduce operating temperature and minimize heat transfer to the caliper body Bleeding Edge: new bleeding adapter and porting for quick, mess-free bleeding Two 21mm pistons Monoblock construction.Features: Compact lever body with DirectLink New detent design for reach adjust Alloy lever blade Lever pivot bushings Stainless hardware Bleeding Edge MatchMaker X compatible (mount not included) Weight: 356gTechnologies:Bleeding Edge Braking Efficiency:New bleed porting and fluid path make it easier to push fluid through the caliper for quick and easy bleeding. A dedicated bleed adapter for the Level Ultimate/TLM and S4 calipers (Guide Ultimate) plugs into the bleed port and seals the system to minimize air contamination and fluid lossTiming Port Closure:A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s new timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistencyContact Point Adjust: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the samePiggyback Reservoir: The brake fluid reservoir on SRAM’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassleDirect Link: SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake It offers a no-nonsense solution to give you precise control.Reach Adjust Brake: Lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyoneDead Band: This refers to the time between the moment you engage the lever and when the pads contact the rotor. SRAM technologies such as SwingLink balance the dual demands of minimizing deadband and optimising modulation for braking finesse and controlExpandable Bladder: SRAM’s Level brake lever design includes a reshaped bladder, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistencyBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Level T provides heavyweight performance in a lightweight package. It packs the same XC and trail-optimized power delivery into a brake set that won t break the bank. Forged Aluminium Lever Construction2-Piston Caliper DesignSteel-Backed Organic PadStainless Steel HardwareDOT 5.1 FluidTooled Reach AdjustmentPiggyBack ReservoirMatchMaker X CompatibleDirectLink / Expandable Bladder / Timing Port Closure TechnologiesHose Lengths: Front 950mm / Rear - 1800mmApprox. Weight: 370g (Direct Mount, 800mm Hose, 160mm CL Rotor - ROTOR NOT INCLUDED)This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on. The PiggyBack Reservoir offers a simple, fail safe way to manage brake fluid, and allows for ambidextrous lever placement so you can switch your levers on the handlebar and run them moto without hassle.
Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker™ compatible brake set gives all the power of its siblings, keeping you in complete control.Specifications:Weight: 410g (direct mount, 800mm hose, 160mm CL rotor).Lever Material: Stamped aluminum.Caliper Design: 2-piston caliper.Finish: Gloss Black.Rotor: CenterLine.Pad: Steel-backed organic.Fluid: DOT 5.1.Adjustment: Tooled reach adjust.Technology Highlight: DirectLink™, Expandable Bladder, Timing Port Closure.Material: Aluminum.Pad / Holder: Top loading.Intended Use: XC, Trail.System: Open system.Rotor Sizes: 140 (rear), 160, 170, 180, 200mm.Tri-Align Caliper Positioning System: No.Speed Dial: No.Bend Zone™: Yes.Ambidextrous: Yes.Stainless Hardware: Steel.
BSD's Levelled Stem is their mid rise stem, coming in at 27mm tall it's the perfect middle ground. Made with a full 6061-T6, CNC machined alloy and a chunky design that's built for strength and durability. The Levelled Stem is finished with an embossed BSD logo and solid bolts throughout. ###section### Product Specs TYPE: 22.2mm REACH: 50mm RISE: 27mm CLAMPING DIAMETER: Top Load WEIGHT: 320g (11.28oz)
The oversized version of the BSD Levelled stem, beefs up the size and thanks to BSD's Gorilla Grip system now having a larger 25.4mm oversized clamping diameter you've got a much tighter hold on your bars. That increase in clamping area size adds 14% more surface area in contact than a regular stem, meaning your bars are a lot less likely to slip when you're flying down a 12 set. ###section### Product Specs TYPE: 25.4mm REACH: 50mm RISE: 27mm CLAMPING DIAMETER: Top Load WEIGHT: 320g (11.28oz)
LEVEL Ceramic Oversized Jockey Wheel SystemThe LEVEL jockey wheel system optimises drivetrain performance by utilising oversized pulley wheels working in tandem with incredibly low friction ceramic bearings. Compatible with Shimano 9100/9150/R8000/R8050 rear derailleurs, the increased efficiency of the LEVEL pulley wheel system helps to shave off those crucial seconds that could be the difference between victory or smashing those PBs. -Black/Red-12T Upper and 16T Lower alloy oversized pulley wheels with ceramic coated bearings for maximum efficiency-Weight: 76gPlease note: The oversized jockey wheel system is NOT compatible with previous iterations of Shimano derailleurs, 105 R7000 series nor with derailleurs equipped with a clutch system.Only compatible with Dura-Ace 9100/9150 Di2 & Ultegra R8000 or R8050 Di2 derailleursMaximum gear capacity (Lower Gear) 28TMinimum gear capacity (Upper Gear) 11TWe recommend you fit a new chain when installing this product; the oversized pulley wheel system will require a slightly longer chain length for the drivetrain to function correctly.
The stunning sram level tlm model puts proven SRAM braking performance at your fingertips thanks to its sleek, lightweight design that's specially optimised for XC and light trail use. Additionally, it delivers power and modulation via its robust alloy lever blade, DirectLink actuation, DOT 5.1 fluid and a two-piston monoblock caliper. Furthermore, this superb design provides you with superior heat management for consistent, fade-free braking, ride after ride. Technologies: Bleeding Edge: Bleeding Edge technology makes bleeding brakes quick and simple. An updated fluid path and bleed porting make it easier to push fluid through the caliper. A dedicated bleed adapter plugs into the bleed port and seals the system to minimize air contamination and fluid loss. DirectLink: SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake It offers a no-nonsense solution to give you precise control. DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. We found that in our systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. Expandable Bladder: SRAM’s new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. Heat Shield: The stainless steel heat shields breaks the thermal connection between the pad and caliper body, reducing caliper fluid temperature by about 20C even in the most extreme testing conditions. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp-a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker X integrates the RockShox®XLoc and is compatible with XX and X0 brakes. Standard Matchmaker is also available and works with any split-clamp design and RockShox PushLoc. PiggyBack Reservoir: The brake fluid reservoir on SRAM’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement - so you can switch your levers on the handlebar and run them moto without hassle. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.
The Level TL provides heavyweight performance in a lightweight package. It packs the same XC and trail-optimized power delivery into a brake set that won t break the bank. This brake matches an alloy Direct Link lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on. The Piggy Back Reservoir offers a simple, fail safe way to manage brake fluid, and allows for ambidextrous lever placement so you can switch your levers on the handlebar and run them moto without hassle.Forged aluminium lever construction2-Piston caliper designCenterLine rotorSteel backed organic padStainless steel hardwareDOT 5.1 fluidTooled reach adjustmentPiggy back reservoirMatchMaker X compatibleDirectLink / Expandable bladder / Timing port closure technologiesHose Lengths: Front 950mm / Rear - 1800mmApprox. Weight: 370g (Direct Mount, 800mm Hose, 160mm CL Rotor)
The Level TL provides heavyweight performance in a lightweight package. It packs the same XC and trail-optimized power delivery into a brake set that won t break the bank. This brake matches an alloy Direct Link lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on. The Piggy Back Reservoir offers a simple, fail safe way to manage brake fluid, and allows for ambidextrous lever placement so you can switch your levers on the handlebar and run them moto without hassle.Forged aluminium lever construction2-Piston caliper designCenterLine rotorSteel backed organic padStainless steel hardwareDOT 5.1 fluidTooled reach adjustmentPiggy back reservoirMatchMaker X compatibleDirectLink / Expandable bladder / Timing port closure technologiesHose Lengths: Front 950mm / Rear - 1800mmApprox. Weight: 370g (Direct Mount, 800mm Hose, 160mm CL Rotor)
SRAM Level TL Disc BrakeEnjoy precise, reliable braking with the TL Disc Brake from SRAM. Designed to tackle challenging cross country (XC) trails, this powerful brake ensures smooth, controlled braking whenever you need it most. Compatible with alloy DirectLink™ levers, Level Ultimate, and Guide series of brakes, for reliability and consistent braking you can count on.Features:Lever Material: Forged AluminiumCaliper Design: 2-piston caliperBrake Mount: Post MountFinish: Gloss BlackPad Material: Steel-backed organicBrake Fluid: DOT 5.1Brake Type: HydraulicAdjustment: Tooled reach adjustMaterial: AluminiumPad/Holder: Top loadingIntended Use: XC, TrailSystem: Open systemBend Zone™: YesAmbidextrous: YesHardware: Stainless SteelSingle or Pair: PairWeight: 370gPart No: DB-LVL-TL-A1Technologies:Direct Link: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control.DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that in their systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.Expandable Bladder: SRAM's new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved backpressure relief, which produces dependable braking power and consistency.MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM® triggers, and various RockShox® controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over.PiggyBack™ Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement.Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurises the system. SRAM's new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.