crankbrothers Eggbeater 11 Ti MTB PedalsTake a sweet ride with the Eggbeater 11 Ti pedal. Weighing in at only 174g per pair, the 11 Ti features all titanium construction with Eggbeater's four-sided entry.The choice of mountain bike pros worldwide, these pedals shed mud like water off a duck. Super easy to service, making them an viable investment for seasons to come.Features: Titanium body, inner wing, sleeve and spindle for ultimate weight savings Low-profile design keeps the sole close to the spindle for a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15° or 20° release angle gives you a customized fit for all terrain 10mm needle bearing inner and cartridge bearing outer Brass cleat and mounting hardware included WEIGHT: 174g/pair Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dial-in your Seatpost for the Terrain Ahead A wireless dropper seatpost guarantees more fun and more safety on technical trails by letting you instantly dial-in your saddle height to suit the terrain ahead, with its 150mms of smooth travel. Once you navigate the technical section, one flick of a finger will set your saddle back to its perfect: that's optimal riding efficiency from this Magura Vyron Elect Wireless Remote Dropper. Wireless Operations Remote The Magura Vyron Elect Wireless Remote Dropper Post utilises Magura's eLECT Remote with ANT+ wireless technology. You can mount the wireless remote on either side of your cockpit. If you also have a Magura suspension fork and/or shock unit with eLECT functions on your bike, you can choose what you prefer: one eLECT remote for the Vyron wireless dropper post and another for forks and/or shock(s) – or you can use all three buttons on a single remote to control every aspect. That's full bike control at the touch of a button. Rechargeable Battery This wireless dropper seatpost has a rechargeable battery that needs topping up after approximately 400 actuations. It contains a motion sensor that puts it to sleep mode to save battery power when the bike is not moving. The battery will recharge from empty in around 3 hours via the micro USB port.
Hand built by Malcolm Borg the BORG31 wheelset is a semi aero, very stiff wheelset based on a wide rim which is perfect for all weather training use, road racing or CX use.A robust all weather race orientated wheelset24mm wide and 31mm deep tubeless ready rims (also compatible with tubes)20 spoke front and 24 spoke rearMiche Primato hubs for reliabilityLife of the rim warrantyWeight (1655g (approx)The BORG31 has been built around a 24mm wide and 31mm deep Kinlin rim with an internal width of 19mm. The rear rim is offset (asymmetric) which increases non drive spoke tension, which is a useful way of increasing spoke life. The rims are tubeless ready and come with tubeless tape, valves and IRC tyre levers. The rims have been built with 20 black Sapim CX-ray spokes at the front and 24 black Sapim CX-force spokes at the rear with black alloy SILS (self locking nipples). The Cx-force spokes have a thicker elbow than most spokes (triple butted) this means longer spoke life.To ensure the best value, performance and durability the BORG22 wheels use Miche Primato hubs. The bearings are 2x6001 C3 in both the front and rear hub shells. The rear freehub has 2x 6901 bearings. The axles front and rear are 12mm diameter and made of steel. The front and rear hub are a free axle design making disassembly really simple. Both the front and rear hub have a bearing preload adjuster which should be set once the wheels are installed in the bike. Simply a reliable wheelset for all weathers and combined with the right tyre it could be the only wheelset you need.Whats included:Wheelset front and rear with Sapim CX- ray and CX-Force aero spokesTubeless rim tapeBlack alloy tubeless valvesQR skewers for Miche and Shimano hubsThe best guarantee (for the life of the rim against spoke failure and anything that could be termed a defect)
WH-R9170 TL carbon clincher disc brake wheel, designed to meet pro road race criteria. Key Features: Lightweight clincher full carbon 40 mm deep 24 mm wide rim for improved aerodynamics, increased rigidity and excellent inertia Easy to use Centre-Lock rotor mount for use with disc brakes 24 stainless steel butted (2.0-1.8-2.0) and bladed straight pull spokes Elbow-less spokes make for a strong yet compliant wheel High lateral rigidity is produced with a wide flange spacing Labyrinth double-contact sealing effectively shuts out water and dirt Alloy cone with integrated steel Borozon treated bearing races - super mirror finish reduces friction Quick and easy to maintain bearing adjustment Cold forged, machined aluminium hub shell and oversized 7075 alloy axle keep the wheel weight to a minimum 700C clincher (tubeless compatible), 23 - 32C For 100 x 12 mm axle Average weight 707 grams
The 2 Short frame from Cult features a short rear end (hence the name) and a steep 75.5° headtube making this one of the most responsive street frames going! This frame also features an integrated headtube, externally machined mid BB shell, a strong investment cast seatpost clamp and seatstay bridge, tapered seatstays with removable brake mounts (not included), vintage style s-bend chainstays with room for larger 2.40" tyres, and 5mm thick heat-treated dropouts. ###section### Product Specs MATERIAL:�Full 4130 Chromoly HEAD TUBE ANGLE:�75.5� SEAT TUBE ANGLE:�70� CHAIN STAY LENGTH:�12.5- 12.8� BB HEIGHT:�11.65" WHEEL SIZE:�20" STANDOVER HEIGHT:�8.65" DROPOUT SIZE:�14mm HEADSET TYPE:�Mid BB TYPE:�Integrated BRAKE MOUNTS:�NA GYRO TABS:�NA WEIGHT:�5.28lbs ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Best suited to Street and Park riding Gusseted tubing for added strength Strong S-bend chainstays with room for 2.40” tires Strong and durable investment cast dropouts
Brandon Begin's riding demands a frame that can withstand a lot of punishment so together with Cult they designed the Heavens Gate. Made from 100% Cult classic tubing for increased strength with investment cast seatpost clamp, seatstay bridge and chainstay yoke that results in a solid frame that can take some abuse. It features top and down tube gussets, an integrated headtube, externally machined mid BB shell and tapered seatstays. Please note: This is the brakeless Heaven's Gate model so there are zero brake mounts anywhere on this frame. ###section### Product Specs MATERIAL: Full Chromoly HEAD TUBE ANGLE: 75.3° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 12.8" - 13.1" BB HEIGHT: 11.8" WHEEL SIZE: 20" STANDOVER HEIGHT: 9" DROPOUT SIZE: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Welded GYRO TABS: None WEIGHT: 5lbs ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Best suited to Street and Park riding Signature model frame High-quality Chromoly construction Strong and durable investment cast construction ###shogun-image-section###
Brakeless version of Ty Morrow's signature V4 frame from Fiend constructed with 4130 chromoly throughout. Features include heat-treated Mid bottom bracket shell and integrated head tube, a double-butted top tube with external gusset, oval double-butted down tube with external gusset, externally butted seat tube with integrated clamp, tapered seatstays and heat-treated 6mm thick dropouts with integrated tensioners. Due to the nature of semi-transparent paint finishes the character of the raw tubing will be visible and may contain vein-like abnormalities making each frame unique. ###section### Product Specs MATERIAL: 4130 Chromoly HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 12.9" BB HEIGHT: 11.625" WHEEL SIZE: 20" STANDOVER HEIGHT: 9" DROPOUT SIZE: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Brakeless GYRO TABS: WEIGHT: 5 lbs (20.75") ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Best suited to Street and Park riding High-quality Chromoly construction Gusseted tubing for added strength Heat-treated dropouts ###shogun-image-section###
The Shimano RS710 C32 disc-brake rear wheel is a great option if you’re looking, either to upgrade your bike’s wheels one at a time or if you simply need a spare. If it’s a full wheelset you’re looking for check out the RS710 C32 wheelset The famed Japanese-component makers have used this series to introduce their most affordable, carbon, road wheel ever. That being said, while it might be a more budget conscious option, that’s not to say its lacking in quality. As is the norm with Shimano’s mid-tier products, this wheel benefits from the technological advances that have been striven for in the production of their top-tier products. The end product is a wheel that’s impressively light—considering the price point—but also incorporates some of the aero-optimisation you’d expect of a modern wheel. Climbing Excellence The Shimano RS710 C32 rear is the perfect for those days spent climbing in the Alps. Weighing a respectable 839g, while there might be lighter wheels out there, at this price point it represents excellent value. In terms of design, the styling has been kept sleek and minimal. This is a stylish hoop in its own, but being so simplistic in its design it will also pair well with a number of other wheels without looking too out of place. Wider Rim, Better Braking As has become the norm in modern wheels, the RS710 C32 has been engineered to be wider than it might have been in the past. The hooked-rim profile is designed to optimally seat a 25mm to 32mm, tubeless tyre. Using a wider, tubeless tyre means you can run your tyres at lower pressures. For the traditionalists, used to pumping up 23mm tyres to 120psi, this might be something of an adjustment. But, rest assured, the accepted wisdom today is that the lower-pressure-wider-tyre combo is faster and more resilient to punctures. The RS710 C32 rear wheel has been engineered for hydraulic disc brakes; the benefits of which are numerous. With the latest disc brake technology, you’ll have consistent stopping power in the wet and on steep and/or long descents. Whether you’re in need of a replacement rear carbon wheel or an upgrade, the Shimano RS710 C46 is an aero-optimised, reliable option. Product Features 32mm rim depth Weight: 839g Internal-rim width of 21mm External-rim width of 28mm 24 spokes, bladed and butted Tubeless Ready Disc mount: Center-Lock 140 mm disc brake rotor compatible Recommended Tyre Size: 25-622—32-622 Pawl and Ratchet Engagement
The Shimano RS710 C46 rear, disc-brake wheelset is an aero-optimised performance wheel. It’s perhaps the Japanese-component maker’s most affordable carbon wheel for the road, ever; but that’s not say it’s lacking in performance characteristics. In their usual fashion, Shimano have drawn on their design and engineering expertise honed in manufacturing their top-tier Dura-Ace and Ultegra lines, to produce a set of wheels that offers an excellent balance between aerodynamic advantage and weight. In short, this is a great all-rounder option. If it’s a complete wheelset you’re looking for, check out the RS710 C46 wheelset. The All-Rounder As the name suggests, the Shimano RS710 C46 rear has a 46mm-deep rim. At this depth, it’s clear the rim is meant for speed. However, at 893g it only comes with a slight weight penalty compared to its shallower sibling, making it an ideal all-rounder. Whether it’s for fast bunch riding or rides over mixed terrain, this is an excellent option. Wider Rims, More Speed Cutting-edge component makers that they are, Shimano have produced a wider rim than we might have expected in the past. Boasting a 21mm-internal rim width, the C46s will seat a 25–32mm tyre, which can also be tubeless. This offers a number of benefits to slimmer tyres. For one, a wider tyre will work more effectively at lower pressures, which improves comfort and grip, as well as reducing rolling resistance. Ultimately this translates to more speed for less effort. And, who could complain about that? The Shimano RS710 C46 rear uses hydraulic disc-brakes. Using the latest disc-brake technology you’ll have access to the consistent stopping power afforded by these systems. Whether it’s wet or dry or you’re descending long and/or steep mountains, you’ll have confidence in your stopping abilities. Of course, the rear wheel is the hub of it all, literally. For this edition, Shimano have retained the cup-and-cone style bearings for the hub, common across much of their range. It’s a simple and reliable system, which has been tried and tested for a number of years. If it’s a carbon, all-rounder rear wheel, that’s at the more affordable end of the spectrum you seek then the Shimano RS710 C46 is the well-worth consideration. Product Features 46mm rim depth Compatible with 11- and 12-speed Weight: 893g Internal-rim width of 21mm External-rim width of 28mm Spoke count: 24 front and rear Hub design: cup and cone Pawl and Ratchet Engagement Tubeless-tyre compatible 11- and 12-speed
Reynonds V2 frame from Fiend, Designed by X Game gold medalist Garrett Reynolds. Constructed from heat-treated 4130 chromoly and gussetted in the right places (external downtube, internal headtube) for a clean look and best tensile strength. The frame’s tubing is double butted with a heat-treated Mid BB shell and headtube, externally butted seat tube with integrated post clamp and integrated chain tensioners to keep the wheel in place. ###section### Product Specs MATERIAL: Full 4130 Chromoly HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 13" BB HEIGHT: 11.625" WHEEL SIZE: 20" STANDOVER HEIGHT: 9" DROPOUT SIZE: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Brakeless GYRO TABS: N/A WEIGHT: 4.74lbs ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Great all round frame for all types of riding High-quality Chromoly construction Gusseted tubing for added strength Built in chain tensioners ###shogun-image-section###
The Shimano RS710 C32 disc-brake front wheel is an excellent option if you’re looking to upgrade or replace an existing one on your bike. If it’s a full wheelset you’re looking for check out the RS710 C32 wheelset This front wheel is the Japanese brand’s most affordable carbon, road wheel ever. If you’re on a budget or simply only need a replacement, then this is great option to consider. As with all of Shimano’s mid-tier products, it benefits from the experience the brand has gained from producing their premium Dura-Ace and Ultegra lines. The result is a wheel that’s relatively lightweight—especially considering the price point—yet stiff and offers some aerodynamic optimization. A Sleek Mountain Wheel A front Shimano RS710 C32 weighs a respectable 665g, making it perfect for those days spent climbing in the Alps. You might be able to find a lighter set of wheels on the market but at this price point this represents excellent value. Boasting a sleek, minimalist design this is a stylish hoop in its own right but it’s also subtle enough that you can easily pair it with an existing rear without it sticking out like a sore thumb. A Wider Rim With Better Braking The width of RS710 C32 has a wide rim profile that has been optimised for a 25mm to 32mm tyre. What’s more, the hooked-rim profile is tubeless compatible. The benefit of the extra width is that you can run lower pressure in the tyre. Although it goes against the previously accepted wisdom of using slim tyres pumped up to 120psi, a wider tyre at a lower pressure will be faster. Combine this with a tubeless setup and you’ll also experience fewer catastrophic punctures. As the RS710 C32 front wheel is engineered for hydraulic disc brakes you’ll benefit from enhanced braking power on offer from the latest disc brake technology. In using disc brakes, you’ll be confident in braking, in the wet or dry and on steep and/or long descents. So if it’s a front carbon wheel you’re in need of, that’s relatively light, reliable, and offers top performance look no further than the Shimano RS710 C32. Product Features 32mm rim depth Weight: 665g Internal-rim width of 21mm External-rim width of 28mm 24 spokes, bladed and butted Tubeless Ready Disc mount: Center-Lock 140mm disc brake rotor compatible Recommended Tyre Size: 25-622—32-622
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.