Goodyear Newton Enduro Tubeless Rear MTB TyreThis mountain bike (MTB) tyre is designed for modern enduro racing and it's ready for the most demanding of course conditions. It features a Dynamic:Grip3 compound that uses triple3 density rubber to deliver balanced levels of grip and treadwear. Goodyear has also made this version specifically for your rear wheel with a rear tread pattern that focuses on acceleration and braking traction. Another highlight is its EN:Wall sidewall protection, which uses a Butyl insert to provide extra sidewall support while also protecting against cuts. In addition, its dual ply construction uses two layers of 120 TPI casing fabric to further enhance this model's enduro level protection and sidewall stiffness.Enduro Rear Tyre with Tubeless Complete DesignThe Newton MTR (Mountain Rear) is part of Goodyear's ultimate tyre package developed for gravity riding and racing. A tyre that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. It features a Tubeless Complete design that offers the same benefits as tubeless-ready (TLR) technology, while also maintaining inflation pressure better than a traditional TLR tyre. This means you'll also enjoy the ability to run lower tyre pressures for increased stability, comfort and fewer chances of flats or punctures.Features: Compound: Dynamic:Grip3 Compound Sidewall Protection: EN:Wall Casing: 2-Ply, 120TPI Use: Enduro Type: Clincher Rear specific tread Tubeless Ready: Yes ETRTO: 27.5x2.4" Option: 61-584; 27.5x2.6" Option: 66-584; 29x2.4" Option: 61-622 Single or Pair: Single rear tyre Weight: 27.5x2.4" Option: 1180gTechnologies: Dynamic:Grip3 Compound: Rear specific featuring triple3 density rubber compounds where necessary to offer balanced levels of grip and treadwear. Dual Ply Construction: Two layers of 120 TPI casing fabric provide enduro level protection and sidewall stiffness. Rear Specific Tread: Designed to bring up the rear, focusing on acceleration and braking traction. EN:Wall Sidewall Protection: EN:Wall Butyl insert providing extra sidewall support while aiding cut resistance. Tubeless Complete: Goodyear Bicycle Tyres proprietary design that features all the benefits of a Tubeless Ready (TLR) tyre but will also better maintain inflation pressure than a traditional TLR tyre.Manufacturer's Part Numbers: GR.014.61.584.V004.R Black 2.4" 27.5" GR.014.66.584.V004.R Black 2.6" 27.5" GR.014.61.622.V004.R Black 2.4" 29"Buy Goodyear Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Goodyear Newton Enduro Tubeless Front MTB TyreFeaturing a Dynamic:Grip3s compound, this enduro mountain bike (MTB) tyre uses Goodyear's softest triple3 rubbers to deliver exceptional grip as well as slow rebound properties. Designed specifically for your front wheel, its tread pattern is developed to smash turns, hold grip on off-camber sections and find that last little bit of traction on wet roots, dusty rocks and nasty turns. Another highlight is its EN:Wall sidewall protection, which uses a Butyl insert to provide extra sidewall support while also protecting against cuts. In addition, its dual ply construction uses two layers of 120 TPI casing fabric to further enhance this model's enduro level protection and sidewall stiffness.Enduro Front Tyre with Tubeless Complete DesignThe Newton MTF (Mountain Front) is part of Goodyear's range of mountain tyres developed for gravity disciplines. It features a Tubeless Complete design that offers the same benefits as tubeless-ready (TLR) technology, while also maintaining inflation pressure better than a traditional TLR tyre. This means you'll also enjoy the ability to run lower tyre pressures for increased stability, comfort and fewer chances of flats or punctures.Features: Compound: Dynamic:Grip3s Compound Sidewall Protection: EN:Wall Casing: 2-Ply, 120TPI Use: Enduro Type: Clincher Front specific tread Tubeless Ready: Yes ETRTO: 27.5x2.5" Option: 64-584; 29x2.5" Option: 64-622 Single or Pair: Single front tyre Weight: 27.5x2.5" Option: 1235g; 29x2.5" Option: 1300gTechnologies: Dynamic:Grip3s Compound: Front specific featuring Goodyear's softest triple3 compound rubbers to offer the ultimate in grip and slow rebound properties. Dual Ply Construction: Two layers of 120 TPI casing fabric provide Enduro level protection and sidewall stiffness. Front Specific Tread: Designed to smash turns, hold grip on off-camber sections and find that last little bit of traction. Sidewall Protection: EN:Wall butyl insert providing extra sidewall support while aiding cut resistance. Tubeless Complete: Goodyear Bicycle Tyres proprietary design that features all the benefits of a Tubeless Ready (TLR) tyre but will also better maintain inflation pressure than a traditional TLR tyre.Manufacturer's Part Numbers: GR.015.64.584.V004.R Black 2.5" 27.5" GR.015.64.622.V004.R Black 2.5" 29"Buy Goodyear Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Goodyear Newton Enduro Tubeless Front MTB TyreFeaturing a Dynamic:Grip3s compound, this enduro mountain bike (MTB) tyre uses Goodyear's softest triple3 rubbers to deliver exceptional grip as well as slow rebound properties. Designed specifically for your front wheel, its tread pattern is developed to smash turns, hold grip on off-camber sections and find that last little bit of traction on wet roots, dusty rocks and nasty turns. Another highlight is its EN:Wall sidewall protection, which uses a Butyl insert to provide extra sidewall support while also protecting against cuts. In addition, its dual ply construction uses two layers of 120 TPI casing fabric to further enhance this model's enduro level protection and sidewall stiffness.Enduro Front Tyre with Tubeless Complete DesignThe Newton MTF (Mountain Front) is part of Goodyear's range of mountain tyres developed for gravity disciplines. It features a Tubeless Complete design that offers the same benefits as tubeless-ready (TLR) technology, while also maintaining inflation pressure better than a traditional TLR tyre. This means you'll also enjoy the ability to run lower tyre pressures for increased stability, comfort and fewer chances of flats or punctures.Features: Compound: Dynamic:Grip3s Compound Sidewall Protection: EN:Wall Casing: 2-Ply, 120TPI Use: Enduro Type: Clincher Front specific tread Tubeless Ready: Yes ETRTO: 27.5x2.5" Option: 64-584; 29x2.5" Option: 64-622 Single or Pair: Single front tyre Weight: 27.5x2.5" Option: 1235g; 29x2.5" Option: 1300gTechnologies: Dynamic:Grip3s Compound: Front specific featuring Goodyear's softest triple3 compound rubbers to offer the ultimate in grip and slow rebound properties. Dual Ply Construction: Two layers of 120 TPI casing fabric provide Enduro level protection and sidewall stiffness. Front Specific Tread: Designed to smash turns, hold grip on off-camber sections and find that last little bit of traction. Sidewall Protection: EN:Wall butyl insert providing extra sidewall support while aiding cut resistance. Tubeless Complete: Goodyear Bicycle Tyres proprietary design that features all the benefits of a Tubeless Ready (TLR) tyre but will also better maintain inflation pressure than a traditional TLR tyre.Manufacturer's Part Numbers: GR.015.64.584.V004.R Black 2.5" 27.5" GR.015.64.622.V004.R Black 2.5" 29"Buy Goodyear Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Di2 Wireless Unit (SM-EWWU111)It may be small and unassuming but this in-line adaptor for your Shimano Di2 system will completely simplify the maintenance of your electronic gearing. This is because rather than having to plug your bike into the PCE1 interface, you can wirelessly pair it with your smartphone or tablet via ANT+ or Bluetooth. Once connected you can perform maintenance and updates, change the number of gear shifts per click and even change the shifting speed.Reasons to Buy: Simplifies your electronic gearing maintenance. Wireless pair it with your smartphone or tablet. ANT+ and Bluetooth compatible. Change the number of shifts per click and your shifting speed.Features: Enables wireless communication for Shimano E-Tube programming with smartphone or tablet computer Wirelessly transmits Di2 data to compatible cycling computers Minimalistic, in-line design for clean aesthetics and integration Compatibility: E-Tube Shimano Di2 cables only and Shimano E-Tube Project softwareA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cut any threadless fork steerer quickly and accurately with this handy saw guideSlotted especially for thicker carbon cutting blades which do not fit in standard cutting guidesYou can easily remove as little as 1 mm from the carbon steerer length for perfect headset installation and adjustmentHeat treated for long lifeThe composite body will not damage the fork's steerer but has steel threads and inserts to withstand heavy shop useSuitable for all unthreaded steerer tubes up to 1-1/4 inches
Cut any threadless fork steerer quickly and accurately with this handy saw guideYou can easily remove as little as 1 mm from the fork steerer length for perfect headset installation and adjustmentHeat treated for long lifeThe composite body will not damage the fork's steerer but has steel threads and inserts to withstand heavy shop useSuitable for all unthreaded steerer tubes up to 1-1/4 inches
The Vittoria Mazza combines years of athlete input with cutting edge tread technology raising the bar on the mixed terrain Enduro tyre category. Starting with a defined centre tread the Mazza uses deep siping in the direction of rotation allowing the tyre to roll fast while still opposing drift especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs making Mazza a top choice for both front and rear use. Substantial room was designed into the centre tread to provide braking traction while also accelerating cleanly. Cornering on the Mazza is handled by Vittorias trademark progressive sipe width technology which gives a gummy inside effective edge but without the instability that competitors experience on the outside of the tread. Simply put bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable confident and communicative feel at the limit of cornering. Mazza has generous tread depth claws into a range of terrain and is stabilized with Vittorias proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads leading to reduced rolling resistance and increased wear life. The bar has been raised Progressive sipe width for tactile grip on rocks and roots Stepped leading edge centre-tread maintains speed and delivers climbing traction Aggressive profile with ample sipe spacing for mixed terrain Features: Material: Nylon 120 TPI Compound: 4C Type: Enduro and EMTB Bead: TLR Colour: Black ETRTO: 60-584 Weight: 1160g
The Vittoria Mazza combines years of athlete input with cutting edge tread technology raising the bar on the mixed terrain Enduro tyre category. Starting with a defined centre tread the Mazza uses deep siping in the direction of rotation allowing the tyre to roll fast while still opposing drift especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs making Mazza a top choice for both front and rear use. Substantial room was designed into the centre tread to provide braking traction while also accelerating cleanly. Cornering on the Mazza is handled by Vittorias trademark progressive sipe width technology which gives a gummy inside effective edge but without the instability that competitors experience on the outside of the tread. Simply put bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable confident and communicative feel at the limit of cornering. Mazza has generous tread depth claws into a range of terrain and is stabilized with Vittorias proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads leading to reduced rolling resistance and increased wear life. The bar has been raised Progressive sipe width for tactile grip on rocks and roots Stepped leading edge centre-tread maintains speed and delivers climbing traction Aggressive profile with ample sipe spacing for mixed terrain Features: Material: Nylon 120 TPI Compound: 4C Type: Trail Bead: TNT Colour: Anthracite ETRTO: 60-584 Weight: 890g
The Vittoria Mazza combines years of athlete input with cutting edge tread technology raising the bar on the mixed terrain Enduro tyre category. Starting with a defined centre tread the Mazza uses deep siping in the direction of rotation allowing the tyre to roll fast while still opposing drift especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs making Mazza a top choice for both front and rear use. Substantial room was designed into the centre tread to provide braking traction while also accelerating cleanly. Cornering on the Mazza is handled by Vittorias trademark progressive sipe width technology which gives a gummy inside effective edge but without the instability that competitors experience on the outside of the tread. Simply put bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable confident and communicative feel at the limit of cornering. Mazza has generous tread depth claws into a range of terrain and is stabilized with Vittorias proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads leading to reduced rolling resistance and increased wear life. The bar has been raised Progressive sipe width for tactile grip on rocks and roots Stepped leading edge centre-tread maintains speed and delivers climbing traction Aggressive profile with ample sipe spacing for mixed terrain Features: Material: Nylon 120 TPI Compound: 4C Type: Trail Bead: TNT Colour: Anthracite ETRTO: 60-622 Weight: 950g
Cut any threadless fork steerer quickly and accurately with this handy saw guideSlotted especially for thicker carbon cutting blades, which do not fit in standard cutting guidesYou can easily remove as little as 1 mm from the carbon steerer length for perfect headset installation and adjustmentHeat treated for long lifeThe composite body will not damage the fork's steerer, but has steel threads and inserts to withstand heavy shop useSuitable for all unthreaded steerer tubes up to 1-1/4 inches.
The Rekon is an aggressive trail tyre inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking and L-shaped side knobs assure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon.Designed for aggressive XC trails,.SpecificationConditions: Hardpack, Loose Over Hard, Medium, Loose,Cornering Control: 1 2 3 4,Rolling Efficiency: 1 2 3 4,TPI: 120,Bead: Foldable,Ply Construction: Single,Compound: 3C Maxx Terra,Tech: Tubeless Ready, EXO+,.Technology3C Maxx Terra: An intermediate compound configuration used in select mountain tyres. 3C Maxx Terra is softer and offers more traction than 3C Maxx Speed, yet provides better treadwear and less rolling resistance than Maxx Grip.Tubeless Ready: Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Our TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtight.EXO: An extremely cut-resistant and abrasion-resistant material added to the sidewalls of select mountain tyres. This densely woven fabric is also lightweight and highly flexible, ensuring that the performance of the tyre remains unaffected. Choose EXO Protection for exceptionally rocky, treacherous trails where the chance of sidewall cuts and abrasions is high.
Corsa N.EXT: The best nylon tyre for competition and high level riders. The Corsa N.EXT: is a racing-inspired performance tyre with ultimate durability. Vittoria used its huge know-how in developing world class tyres to design the new Corsa N.EXT! The latest Corsa is an evolution of the brand, and brings multiple industry leading technologies to market. Starting with our supple yet durable 100 TPI nylon casing, and adding a proprietary mix of 2 different Graphene compounds plus Silica. The new Corsa N.EXT achieves racing inspired speed and feel, with the everyday durability of nylon construction. Nylon casing provides durability, for daily racers who want to raise the bar of their performance relying on a long-lasting tyre.Nylon casing provides durability, for daily racers who want to raise the bar of their performance relying on a long-lasting tyre,Proven tread design used by Vittoria teams in the World Tour,New combination of Silica and Graphene compound for improved rolling efficiency, grip and longer wear-life.Key Features:Material: Nylon 100 TPI,Compound: 2C Graphene 2.0,Discipline: Road Race Performance.