Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
These custom, Swiss made bearings are double sealed, fully serviceable, and removable which give a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers, again increasing life and reliability. Hope uses a noncontact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.
DMR V-Twin Clipless Mountain Bike PedalsDesigned to tackle the toughest of mountain bike trails, these Clipless Mountain Bike Pedals from DMR are the most versatile caged-clip system out there, thanks to their durable aluminium construction and long-lasting Chromoly (CrMo) axle. Rider Optimised Mountain Bike Clipless PedalsThese mountain bike clipless pedals employ DMR's range of pins that are paired with a unique nylon bumper and metal shim. This allows the clipless pedal to be customised for optimal rider float preferences to improve your riding experience.Tough Mountain Bike Clipless PedalAn extruded and CNC machined custom DMR Alloy cage with fully sealed (fully serviceable) bearing system allow these V-Twin Clipless Pedals to take years of abuse in the toughest of situations whilst maintaining a low weight.Features:Nylon bumper designLarge platform areaShimano Pedalling Dynamics (SPD) compatible designAnodised coloured finishSteel sizing-shim set includedMaterial: Tough extruded aluminium body, CNC machinedAxle Material: Heavy-duty 4140 Chromoly (CrMo) steel axlesBearing Type: Serviceable bearing systemPins Included: 7 tuneable pins per side (full set supplied)Cleats Included: 5º float cleat set suppliedWeight: 546g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. As with the threaded version of the BB you can fit Sram/Truvativ cranks with the use of the adapters which opens this BB up to all markets and brand allegiances. Fits BB92 / BB89.5 / BB86.5 & 100mm BB's for Fat Bikes.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike.This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. As with the threaded version of the BB you can fit Sram/Truvativ cranks with the use of the adapters which opens this BB up to all markets and brand allegiances.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike.This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. As with the threaded version of the BB you can fit Sram/Truvativ cranks with the use of the adapters which opens this BB up to all markets and brand allegiances.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 - Stainless Bottom Bracket for BBRight from Hope. Incredibly durable stainless steel bearingsScrew together design prevents creakingSuitable for BBRight frames and cranksetsDesigned to fit frames which have a BBRight bottom bracket shell and cranks, this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. If you want one of the most durable bottom brackets around, Hope have the answer!
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike.This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. As with the threaded version of the BB you can fit Sram/Truvativ cranks with the use of the adapters which opens this BB up to all markets and brand allegiances.