Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Keep your Peaty s Holeshot Kit topped up with some spare plugs for those trailside punctures. This pack contains 6 plugs.Available in 1.5mm & 3mm plug sizes6 plugs per pack, in 2 sheets of 3 plugsDesigned to fit perfectly into the body of Peaty's Holeshot Tyre Puncture Plugger toolPackaged using recycled cardboard header cards and biodegradable bags
Keep your Peaty s Holeshot Kit topped up with some spare plugs for those trailside punctures. This pack contains 6 plugs.Available in 1.5mm & 3mm plug sizes6 plugs per pack, in 2 sheets of 3 plugsDesigned to fit perfectly into the body of Peaty's Holeshot Tyre Puncture Plugger toolPackaged using recycled cardboard header cards and biodegradable bags
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
FSA's 'The Big Fat Pig' 1.5" Reducer headset is designed for use 1 1/8" Steerer tubes. It features forged Cromoly cups and massively oversized caged bearings for maximum strength, making it ideal for downhill use.Steerer Size: 1 1/8"Upper Stack Height: 16.9mmLower Stack Height: 11.7mmTotal Stack Height: 28.6mmWeight: 350gTop And Bottom Bearings: 160-6730Crown Race: H6051
Keep your tubeless tyre repair kit well stocked with Blackburn's Spare Tubeless Plugs. When used in combination with a Blackburn Tubeless Plug Tool these plugs will help you to get back riding in no time at all. Includes 10 plugs.
Want to be covered no matter what happens or just really, really hate walking home The Dynaplug Mega Pill is for all the truly prepared boy and girl scouts out there. The Mega pill is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for epic rides in the middle of nowhere, including a grand total of 7 pre-loaded Dynaplug insertion tubes and a micro knife for cutting the plug tail.No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there!A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationEven as the big boy of the Dynaplug range, the Mega pill is only 65 x 28 mm in size and weighs just 85 grams fully loadedKit includes the tool, 5 x standard and 2 x Megaplug compatible stainless-steel insertion tubes 5 x Soft nose standard plugs, 2 x Megaplugs, 1 x micro knife, a handy carry pouch and a pipe cleaner to help prep the tubes for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl flangeless design, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
The FSA Orbit 1.5E ZS 1 1/8-1.5 Inch Threadless Headset is for tapered 50mm/63mm OD head tube and comes with an alloy top cover, forged alloy and CNC machined alloy cups.1.1/8", 36°×45° ACBFor tapered 50mm/62mm OD Head Tube1.1/8" to 1.5" steererAlloy top coverUpper: Forged alloy cup with ACB (blue seal)Lower: 1.5" CNC machined alloy cup with ACB (blue seal)Stack height: 16.9 + 2.9 = 19.8mmWeight: 129.6gSpares:Upper Bearing: TH873 (160-1648)Lower Bearing: TH073 (160-6761)Crown Race: 1.1/8-1.5 (H6088, 160-5551)
Tested extensively by the Aztec test team, these new Aztec rotors are lighter and stronger but keep the same great feel and braking power. The Aztec designed rotors offer improved braking power and feel to disc brake users.Precision laser cut from the best quality, most durable stainless steel alloys availableThe Aztec design is self-cleaning to maintain performance, and well vented to dissipate heatOffers the same effective surface braking area as a regular rotor, with a weight savingCompatible with virtually all brands of hydraulic and mechanical Disc callipersDrilled for attachment to any 6-bolt international standard hub
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl flangeless design, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl flangeless design, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.