Key Features:Our new Tubeless ready Trail/Enduro wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,26" & 27.5" versions use the Alex Volar 2.5 tubeless ready rim, 25mm internal & 30.2mm external widths - Creates a perfect tyre profile for tyre sizes of 2.35" or larger.,29" version uses the Alex Volar 2.3 tubeless ready rim, 23mm internal & 28.4mm external widths - Creates a perfect tyre profile for tyre sizes of 2.25" or larger.,Chosen Trail hub – Rear Q/R 135mm, 4 sealed bearings, 32h, 9/10spd.,120 point engagement MGC freehub system allows for almost instant drivetrain engagement and an idividual freehub noise.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,Sram XD freehubs available - Part No. SJFHBXD.,135 x 12mm axle adapters available - Part No. SJTR135X12KIT.,142 X 12MM axle adapters available - Part No. SJTR142X12KIT,26” wheel 982g / 27.5” wheel 1016g / 29" 1039g..
The ultimate pedal for enduro racing and riding.The Mallet E was developed with the help of some well-known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well-loved features.There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Key Features:Concave pedal platform for a secure foothold. Like it's DH equivalent you get that flat pedal feel whilst running clipless.,49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent.,Ribbed body allows for better traction when unclipped,Chamfered edges for a reduction in rock strikes,Excellent mud-shedding: the design is very open.,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner Igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,Crank brothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1, 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes.There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Key Features:Excellent mud-shedding: the design is very open.,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Chamfered edges help reduce rock strikes,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..Specifications:Weight (per pair): 320g,Spindle: Forged scm 435 chromoly steel,Body: 6061-T6 aluminium,Wings: 17-4PH stainless,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Release angle: 15° or 20°,Warranty: 5 years.
A smart upgrade for your road bike is now even smarter. Lighter, and smoother riding, the Ksyrium UST delivers proven performance and new Road Tubeless technology. 19mm internal rim width Straight-pull bladed double butted spokes deliver optimal stiffness Quick-Release Only 755g without tyre
With a variety of top features, it's not difficult to see why this is the case. These crankbrothers Mallet DH pedals provide instant engagement, a stable and high grip platform, smooth operation, and excellent durability when landing huge jumps.
crankbrothers Mallet DH Clipless Mountain Bike PedalsIt's easy to see why the Mallet downhill (DH) model is the first choice for multiple professional downhill riders. This is because crankbrothers constructs the body from a bombproof 6061-T6 aluminium, adds stainless steel for the wings and adds forged chromoly (CrMo) axles. The fast-engaging clipless system has a 4-side entry design so you can just stamp your foot in and go, plus its open mud-shedding design prevents dirt build-up. Tough enough to withstand the harshest landings, these high grip, strong and smooth operating pedals are ready to attack the trails.Features: Platform Material: 6061-T6 AluminiumWing's Material: 17-4PH Stainless SteelSpring Material: 300 series Stainless SteelAxle Material: Forged Scandium 435 Chromoly (CrMo)Axle Factor: 57mmAxle Size: Standard 9/16" threadInner Bearing: Type igus LL-glide bearingOuter Bearing: Type enduro cartridge bearingTraction Pins: 8mm adjustableRelease Angle: 15°-20°Cleats: Premium brass cleats with shims includedCleat Type: Shimano Pedalling Dynamics (SPD) typePins: Adjustable pins 8 per sideSpare Pins Included: NoMax Rider Weight: No restrictionWarranty: 5 yearsConcave platform for secure footholdTraction pad technologyCustomisable interfaceRibbed body for better traction when unclippedChamfered edges4-sided entrySuperior mud sheddingCustomisable float & release anglePremium bearings & double seal systemWeight: 479g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 7 Clipless MTB PedalsDesigned for competition use but excellent for all-round use, the crankbrothers Candy 7 Clipless MTB Pedals feature a clip mechanism that includes four-sided entry, superior mud shedding ability, and a customisable release angle.Durable Body with Increased Service LifeSpecial attention to detail has been paid to create an especially durable body with chamfered edges to reduce the chance of rock-strikes. The wings and springs of the pedals are made from Stainless Steel to resist corrosion and improve durability. Even the end cap has a bash guard to increase the service life of the pedals.Features: Body Material: 6061-T6 Aluminium Spindle Material: Forged scm 435 CrMo Spring Material: 300 series Stainless Steel Wing Material: 17-4PH Stainless Steel End cap: Hex alloy Bearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearing Cleats: Premium Brass cleats with shims included Q-Factor: 52mm Release Angle: 15°/20° Integrated traction pad technology to optimise the shoe/pedal interface Ribbed body for better traction when unclipped Chamfered edges to reduce rock-strikes Four-sided entry and superior mud shedding Customisable float & release angle Hex alloy end cap and bashguard Premium bearings & double seal systemWeight: 320g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The world’s most successful downhill / race pedal just got even better! Dual-chamfered edges reduce costly rock strikes, and combined with proven traction pad technology Mallet DH maximises your performance. Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders.The ability to set the release angle of the cleats to either 15° to 20° means you can be really active on the pedal whilst still remaining attached to the bike. The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike.Key Features:Release angle: 15° to 20°,Cleat: Premium brass cleats included,Warranty: 5 years,Weight: 479g per pair,Platform: Extruded/machined aluminium,Wings: cast stainless steel,Spring: 300 series spring stainless steel,Spindle: Forged scm435 chromoly steel,Q-factor: 57mm,Inner bearing: igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails,Outer bearing: enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal,Traction pins: 8mm adjustable,Excellent mud-shedding: using the very open designed pedal platform,Dual chamfered edges to reduce rock strikes,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal,Extremely lightweight: pedal design is very simple with only a few key parts,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle.
Half air compressor – Half pump. The JoeBlow® Booster pump just made it easier to install tubeless tires. This pump has an integrated aluminum air chamber that stores an air charge of one liter up to 160psi / 11 bar to quickly fill your tire and ensure the proper installation on a tubeless rim just like a shop compressor. Once you flip the selector from “CHARGE” to “INFLATE” mode air bypasses the chamber and flows directly into your tire like a standard pump. The top-mounted easy to read gauge air release button and comfortable dual density polymer grip combined with its extra-long hose and stable base makes mounting tubeless and standard tires a breeze! Features Easy to read top mount gauge. In CHARGE mode the pump quickly and easily seeds and fills tubeless tires using the integrated air chamber. Switching to INFLATE mode allows you to efficiently and precisely inflate your tire like a traditional pump Air release button SmartHead® DX3 w/ lower profile air release button to minimize unintended pressure release Anodized aluminium barrel with large cylindrical aluminium chamber and durable steel base Oversize padded handle SmartHead™ DX3 connector Extra long hose Top mounted analogue 160 psi gauge Air bleed button for precise pressure setting Integrated Hose dock HEAD SmartHead® DX3 w/ air release button & x-long hose BARREL Anodized aluminum w/ large cylindrical aluminum chamber GAUGE 160 psi / 11 barTop mount analog PRESSURE TUNING Air release button HANDLE Oversize padded / Dual density polymer BASE Steel ADDED FEATURE Hose dock SIZE 74 x 25 x 18.5 cm / 29.1” x 9.8” x 7.3” WEIGHT 2.9 kg / 6.4 lb VOLUME PER STROKE 303 cc HOSE LENGTH 152
Key Features:Alex CX28 tubeless ready rims, 28mm deep section, 17mm internal width & 21.8mm external width. This added width accepts 25c tyres to perfection, which together will offer reduced rolling resistance, increased comfort & better handling.,Chosen 28h hub – Non disc version. 130mm Q/R axle type. 4 sealed cartridge bearings.,120 point MGC freehub system offers almost instant drivetrain engagement with a unique freehub sound.,9/10/11Spd Shimano compatible freehub.,Campagnolo freehub bodies available - Part No. SJFHBCAMP.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spokes with brass nipples.,3 cross lacing pattern for increased durability.,Individual wheel weight 855g..
The Crank Brothers Eggbeater 3 clipless pedal provides the form and function of Crank Brother's exclusive four-sided entry, at a price that allows you to outfit any bike. Four-sided open design ensures quick and easy engagement every time as well as shedding mud build up fast making it perfect for XC, trail riding and cyclo-cross, be it racing or training.Key Features:Minimal & lightweight, the lightest Mountain Bike pedals in the world,Customizable float and release angle, to suit any rider,Premium bearings and Hex alloy endcap, make it easy to service the pedals,Double seal system,Traction pad compatible (1mm set included),Weight: 278g per pair,.
CushCore XC MTB Tubeless Tyre Insert SetTrusted by many of the world's best riders with victories such as the 2020 Men's and Women's UCI Downhill World Champions, Women's eMTB World Champion, as well as multiple Enduro World Series wins, CushCore is quickly becoming one of the must-have names for tyre inserts. This version is engineered for the rigours of cross country (XC) racing and light trail riding, by allowing riders to push the limits of their tyres and suspension to new levels. Boasting 35% more sidewall support, 16% improved suspension performance, 12% less shocks and vibrations and 50% more impact protection, this set of two inserts is an ideal choice of upgrade for conquering every XC ride.How It WorksNot all tyre inserts are created the same. CushCore is no ordinary tyre insert and is based on a new concept, tyre suspension. Any suspension system has a spring and a damper, and with CushCore, pressurised air in the tyre is the spring and the CushCore tyre insert is the damper. Like traditional suspension, a constant damping force wouldn't work. It has to be dynamic. Suspension should be supple on small bumps but firm on the big hits. CushCore responds differently depending on the tyre load and scenario. The more the tyre flexes, the more damping it provides.Go BiggerCushCore improves suspension performance by 16% and reduces impact force from big hits by 50%. Send it with total confidence.Corner Harder35% more sidewall stability eliminates tyre squirm and burping, even at low tyre pressure. Rail corners with total confidence.Ride FasterCushCore provides a 12% smoother ride and 3% reduced rolling resistance. Ride with more control, more momentum, and less fatigue. It's like taking fewer punches in a fight.Features: Use: Cross Country (XC), Light trail riding Tyre Widths: 1.8-2.48" Inner Rim Width: 22-32mm Includes: 2x CushCore tyre inserts, 2x 44mm CushCore Presta air valves, valve core tool, installation instructions and rim stickers Tubeless Ready Unrivalled impact protection Super stable cornering Superior traction Weight: 27.5" Option: 140g; 29" Option: 150gTechnologies: CushCore transforms your tubeless tyre into a suspension system with a tune-able air spring and foam damper. A proprietary closed-cell, polyolefin foam controls compression and rebound forces. Its lightweight, ultra durable and impervious to sealant. CushCore's patented profile applies constant pressure on the tyre sidewalls. This provides protection and stability even at low tyre pressures. CushCore is designed to fit tight on the rim. This radial tension locks the bead to the rim while maintaining a supple tread patch.Manufacturer's Part Numbers: CC-70025 Grey 27.5" CC-70027 Grey 29"Buy CushCore Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.