The BORG 26 All Weather wheelset provides guaranteed reliability in all conditions. The wheels are built with high mileage riders in mind and therefore are suitable for all types of riders. Those that ride in the foulest of conditions and simply need dependable wheels will love these wheels from BORG. Dependable does not have to heavy though. The BORG 26 have every detail covered. A robust all-weather wheelset for rim brakesStiff yet comfortableTriple butted Sapim spokesShimano8/9/10/11 speed, SRAM AXS 12 speed or Campagnolo 9/10/11/12 speed freehub24mm wide tubeless tyre ready rims (tubed tyre compatible also)26mm deep rimsLife of the rim warrantyWeight from 1760g 32 spoke with Campagnolo hubsBlack hub, rim and spokesMiche Primato HubsThe wheels are hand built in the BORG shop. They are mainly used as an all-weather training wheelset. The rims are not expensive if they need to be replaced which is unlikely and the hubs, well they love the wet. Bearing life is long in all conditions. The rim is 24mm wide and 26mm deep. It weighs 475g. The rear rim has offset drilling for increased NDS spoke tension (this is a good thing for spoke life). The internal width of this rim is 19mm and it has a 2mm thick spoke nipple bed. All tyres will sit wider on this rim than they would on a narrower one. This improves rider comfort due to the increased air volume and due to the different tyre shape handling in the bends particularly over broken road surfaces is improved. These wheels are robust, and the rims are low cost meaning they are perfect training wheels and ideal for wet weather/winter use. They are supplied tubeless ready with tubeless tape and valves. Tubed tyres can of course be fitted and are an easy fit. Even Schwalbe Marathons fit with ease. Please note that the images are for illustration purposes only.
Hand built by Malcolm Borg the BORG31 wheelset is a semi aero, very stiff wheelset based on a wide rim which is perfect for all weather training use, road racing or CX use.A robust all weather race orientated wheelset24mm wide and 31mm deep tubeless ready rims (also compatible with tubes)20 spoke front and 24 spoke rearMiche Primato hubs for reliabilityLife of the rim warrantyWeight (1655g (approx)The BORG31 has been built around a 24mm wide and 31mm deep Kinlin rim with an internal width of 19mm. The rear rim is offset (asymmetric) which increases non drive spoke tension, which is a useful way of increasing spoke life. The rims are tubeless ready and come with tubeless tape, valves and IRC tyre levers. The rims have been built with 20 black Sapim CX-ray spokes at the front and 24 black Sapim CX-force spokes at the rear with black alloy SILS (self locking nipples). The Cx-force spokes have a thicker elbow than most spokes (triple butted) this means longer spoke life.To ensure the best value, performance and durability the BORG22 wheels use Miche Primato hubs. The bearings are 2x6001 C3 in both the front and rear hub shells. The rear freehub has 2x 6901 bearings. The axles front and rear are 12mm diameter and made of steel. The front and rear hub are a free axle design making disassembly really simple. Both the front and rear hub have a bearing preload adjuster which should be set once the wheels are installed in the bike. Simply a reliable wheelset for all weathers and combined with the right tyre it could be the only wheelset you need.Whats included:Wheelset front and rear with Sapim CX- ray and CX-Force aero spokesTubeless rim tapeBlack alloy tubeless valvesQR skewers for Miche and Shimano hubsThe best guarantee (for the life of the rim against spoke failure and anything that could be termed a defect)
Brand-X Threadless 34EESS Sealed HeadsetComing kitted out with a robust alloy construction, this headset is engineered for the demands of modern riding. Brand-X has also put this model through its CNC forging and machining process to remove any unnecessary excess material, while still maintaining maximum strength. This allows it to achieve a superior strength-to-weight ratio for smooth and secure steering performance without any weight penalty. One final highlight is its angular contact sealed bearings that deliver reliability in all weather conditions. Comes complete with a top cap and a star nut to complement your ride.Features: Material: CNC forged and machined 6061 Alloy SHIS Norm: EC34 28.6 EC34 30 Height: 29mm Angular contact sealed bearings Includes: Top cap and Star NutManufacturer's Part Number: BXTHREADLESS34EESSH Black 34EESS SealedBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Bryton Smart Cadence Sensor applies both ANT+ and Bluetooth technology. It wirelessly transmits your cadence data to cycling computers and smart phones. With no magnets and exposed parts to line up, it is much easier to install.Easy to Use - Smart Cadence Sensor is so Magnet-less, and it is super easy to install, maintain and move between bikes.Dual Support - Featuring the application of dual technology, ANT+ and Bluetooth, Smart Cadence Sensor can connect to both cycling computers and smart phones. It is compatible with most devices in the market.Improve Yourself - Designed to help you monitor your outdoor and indoor training. Combine it and improve your personal best or compete with other cyclists.Specification - Wireless Technology: Bluetooth 4.0 & ANT+
The Bryton Smart Speed Sensor applies both ANT+ and Bluetooth technology. It wirelessly transmits your speed data to cycling computers and smart phones. With no magnets and exposed parts to line up, it is much easier to install.Easy to Use - Smart Cadence Sensor is so Magnet-less, and it is super easy to install, maintain and move between bikes.Dual Support - Featuring the application of dual technology, ANT+ and Bluetooth, Smart Cadence Sensor can connect to both cycling computers and smart phones. It is compatible with most devices in the market.Improve Yourself - Designed to help you monitor your outdoor and indoor training. Combine it and improve your personal best or compete with other cyclists.Specification - Wireless Technology: Bluetooth 4.0 & ANT+
David Grant's signature BSD Raider Bar offers a higher rise than usual, inspired by David's hardcore style of riding. The Raider Bars are constructed from multi-butted, post weld heat-treated 4130 chromoly giving them maximum strength to weight ratio. Heavy knurling around the clamping area keeps the bars from slipping on impacts. Rise height: BSD's Raider Bar comes as standard with a massive 10" rise height. BSD's Raider Bars are also available in Oversized, click here to check them out. ###section### Product Specs Bar Type: 2pc Rise: 10" Width: 29.5" Up Sweep: 2° Backsweep: 11° Bar Clamping Diameter: 22.2mm Weight: 776g / 1.75lbs ###section### ###shogun-image-section###
Oversize version David Grant signature Raider handlebars from BSD. The Raider bars feature a massive 10 rise and are made from multi-butted post weld heat treated 4130 for maximum strength to weight ratio. BSD OS Gorilla Grip system. The stem clamping area diameter is increased from 7/8 (22.2mm) to 1 (25.4mm). This increase in diameter gives 14% more clamping area than on regular 7/8 handlebars, so when youre nose diving down a 12 set your bars are less likely to slip. ###section### Product Specs Rise: 10" Width: 29.5" Up Sweep: 2 ° Backsweep: 11 ° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 1.75lbs ###section### ###shogun-image-section###
The Giraffic bar has been in production for over six years now and Reed decided that he would like to make some changes to it, a little more upsweep for more comfort and a little taller on both sizes. The new Safari bar is constructed from heat-treated multiple butted 4130 chromoly, available in regular 7/8" and Oversize 1" Gorilla Grip versions. A classic two piece bar styling but still with the same Giraffic look. 9.1 and 9.6" rise versions available. ###section### Product Specs Rise: Multiple Options Width: 29.5" Up Sweep: 3 ° Backsweep: 13 ° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 1.7lbs ###section### ###shogun-image-section###
Busch & Müller Stainless Steel Pan Head Screw and Nut The Busch & Muller Stainless Steel Pan Head Screw and Nut is a genuine Busch & Muller spare part and suits its front dynamo lights.Features: Stainless steel flat head screw + nut for headlight bracket Suits front dynamo lights Manufacturer's Part Number: 475ISMBuy Busch & Müller Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The CADEX 36 Disc WheelSystem is a versatile lightweight carbon wheel built for real-world performance. Featuring a hookless rim design with optimal 22.4mm internal width and 36mm depth it delivers unbeatable acceleration and climbing efficiency as well as confident handling on descents in the wind and on varied terrain. Precision reinforced lay-up places carbon fibre only where needed creating a strong stiff rim structure weighting in at only 1302 grams. Dynamic Balanced Lacing technology produces a stiffer more efficient wheel with outstanding power transfer. High tensile strength CADEX aero carbon spokes minimize lateral flex for more efficient acceleration and climbing. The 22.4mm inner rim width creates an increased actual tyre contact patch for better traction and impact absorption better handling more confidence and less rider fatigue CADEX hookless rim technology features a broad inner rim width and durable continuous carbon fibre structure helping create a rounder tyre shape for superior grip and handling plus added sidewall support when cornering all without compromising weight The precision machined low-friction R1-C30 hub significantly reduces bearing load as CADEX ceramic bearings further increase efficiency by offering lower rolling resistance and 1.5x smoother action than steel A low 36mm rim profile offers excellent stability in shifting winds 700c x 36mm
The CADEX 36 Disc WheelSystem is a versatile lightweight carbon wheel built for real-world performance. Featuring a hookless rim design with optimal 22.4mm internal width and 36mm depth it delivers unbeatable acceleration and climbing efficiency as well as confident handling on descents in the wind and on varied terrain. Precision reinforced lay-up places carbon fibre only where needed creating a strong stiff rim structure weighting in at only 1302 grams. Dynamic Balanced Lacing technology produces a stiffer more efficient wheel with outstanding power transfer. High tensile strength CADEX aero carbon spokes minimize lateral flex for more efficient acceleration and climbing. The 22.4mm inner rim width creates an increased actual tyre contact patch for better traction and impact absorption better handling more confidence and less rider fatigue CADEX hookless rim technology features a broad inner rim width and durable continuous carbon fibre structure helping create a rounder tyre shape for superior grip and handling plus added sidewall support when cornering all without compromising weight The precision machined low-friction R1-C30 hub significantly reduces bearing load as CADEX ceramic bearings further increase efficiency by offering lower rolling resistance and 1.5x smoother action than steel A low 36mm rim profile offers excellent stability in shifting winds Rim Material Carbon Rim Type Hookless Clincher Tubeless CADEX Tubeless System (rim tape and valve kit included) Suggested Tyre Size 700 x 25C – 700 x 32C Rim Height 36mm Rim Outer Width 26mm Rim Inner Width 22.4mm ETRTO 622-22 Front Hub CADEX R1-C30 Hub Centerlock Rear Hub CADEX R1-C30 Hub Ratchet Driver Centerlock Hub Compatibility Shimano 11 / SRAM XDR 12 / Campagnolo Bearing CADEX Ceramic Bearings Front Axle 100x12 Thru Axle Rear Axle 142x12 Thru Axle Spokes (Front) Aero Carbon Spoke Lacing (Front) DBL 21H Spokes (Rear) Aero Carbon Spoke Lacing (Rear) DBL 24H Nipple Type Alloy Internal Warranty 2 year warranty Incident Replacement 5 Year (registered original owner only) Weight (Pair) 1302g WheelSystem Weight Limit: 285 lbs / 129 kg
The CADEX Classics Tubeless tyre is a premium all-conditions road tire designed for optimal performance on the roughest of roads. With RR-S AR compound offering outstanding grip Supple Race Casing delivering maximum ride feel and Race Shield + layer protecting against cuts and punctures the CADEX Classics Tubeless is the superior choice for the most demanding conditions. The CADEX Carbon/Kevlar Composite bead through greater strength does not stretch and provides a safer interface with the tyre and rim. It can also withstand the higher pressures needed for road tubeless tyres and reduces air loss making it the best choice for any tubeless set up. RR-S AR Compound for outstanding grip and maximum speed in all conditions. Single-layer SRC casing for an incredibly supple ride at a super low weight. Race Shield + for 34% more puncture protection without compromising on speed or ride quality. All-new all-conditions tread pattern for increased grip and water shedding. Size 700x25c Weight 290g ETRTO 25x622 MIN - MAX Pressure PSI / BAR 70 PSI / 4.8 BAR - 95 PSI / 6.5 BAR TPI 170 Bead Kevlar® / Carbon Composite Bead Type Folding Casing Supple Race Casing (SRC) Puncture Protection Race Shield+