The Rockfight Chest Protector is the lightest upper body protection Troy Lee Designs has ever created. Packed full of the features, the mountain bike chest protector incorporates strategically placed EPP on the chest and spine while allowing unrestricted airflow and complete fit customisation.The Rockfight has a CE EN14021 Stone Shield certificated front plate providing protection from roost and lofted debris that might come flying your way on the trails.The Rockfight has form fit side plates, fully adjustable shoulder straps, and removable shoulder pads and allows neck brace compatibility on most models.Ultra-ventilated protective plates in the back are paired with channelled bio-foam for increased laminar airflow, so air travels smoothly cooling you better.The construction is also featherweight and with a streamlined fit for easy wearing underneath a jersey and to minimise fatigue, so you can keep riding all day.Key Features: CE EN14021 Stone Shield certification of front plate for proven protection from debris,Advanced integrated EPP in key impact zones on chest and spine,Form fit side flex plates, fully adjustable fore/aft shoulder straps and removable shoulder pads allows neck brace compatibility,Featherweight construction and streamlined form fit for reduced rider fatigue and sub jersey fitment,Ultra-ventilated protective plates coupled with engineered channelled bi-foam for increased laminar airflow.
The Troy Lee Designs Raid Knee Guards are hardy enough to offer you peace of mind on the gnarliest trails, but also comfortable and ventilated enough to be a pleasure to wear for a full day of shredding. Constructed from vented Neoprene, with D3O® reinforcement, the sleeve will defend your lower thigh, knee joint and shin. Thanks to strategically placed grippers, you can count on it to reinforce your leg in the areas where it’s most needed. In particular, this guard features abrasion resistant pads at the side and over the kneecap and offers side impact protection. The best knee guards are more than barriers, though, they’re wearable so that they’ll always be in place when you need them. The breathable mesh back, thoughtful areas of padding and adjustable fit of the Raid Knee Guard mean it will keep your leg dry, snug and protected.Meanwhile, a flex gusset will allow your leg to straighten without resistance, while a rear compression band stimulates the muscles and encourages function. As a further bonus, the Raid Knee Guard comes with its own protective, mesh lined bag that will keep it fresh between sessions.Key FeaturesD3O® liner CE certified to EN 1621-1 Level 1 standard,Made from vented Neoprene,Breathable, wicking mesh rear panel,Tough, abrasion-resistant kneecap and side pads, side impact protection,Held in place by silicone gripper band at upper leg,Reinforced by adjustable Velcro strap,Sold as a pair, left and right.
The Troy Lee Designs Youth Rogue Knee/Shin Guards will defend the knees and shins of young gravity addicts as they hurl themselves downhill.Like a standard cycling helmet, it’s composed of a hard-shell plastic outer layer that disperses impact over a large area, while allowing heat and moisture to disperse through spaced vent holes, and a soft EVA foam inner layer, which absorbs and lessens that impact. The two layers, working together as part of a highly flexible, comfortable and breathable pad, will reinforce the front of young rippers’ legs while allowing free movement, so that they’ll barely notice they’re wearing a guard. They’ll also be able to cinch it round their leg snugly using two adjustable straps. Perfect for giving downhill stars of the future the confidence they need to ride their best, the Youth Rogue Knee/Shin guard comes with its own protective, mesh lined bag that will keep it fresh between sessions. Key Features:CE certified to EN 1621-1 Level 1 standard,Ventilated hard shell plastic outer layer ,Soft, EVA foam inner layer,Two adjustable elastic strips for a secure fit,Sold as a pair, left and right.
The Troy Lee Designs Youth Speed Elbow Sleeve is a full-length sleeve designed to protect the arms of budding mountain bikers on the trails. Constructed from sturdy, 4mm D3O® abrasion resistant material, silicone grippers ensure it will stay right where it’s most needed. Despite its hardiness, young shredders will find this ultra-light sleeve breathable and comfortable enough to forget about all day, thanks to its flexibility and the inclusion of a breathable mesh panel. It will remain wonderfully supple right up until its strength is demanded, when the D3O® will harden to disperse energy and keep budding MTB aficionados safe. Key Features:D3O® 4mm ultra-lightweight, abrasion resistant yet flexible elbow pad,Silicone grippers hold it firmly but gently in place,Breathable mesh panel ensures breathability and comfort,CE EN 13688:2013 Certified ,Reflective logos ,Sold as a pair, left and right.
Always EvolvingIt wasn't easy to improve upon the class-leading design and function of our D3 helmet, but we made it happen. Built with an aerospace shell design and materials, we were able to get the D4 Composite helmet to 1050 grams without sacrificing any strength. MIPS C2 protection system is used to add an additional layer of safety in the event of a fall. For comfort, the D4 Comp routes cooling air through a front air intake system that flows through the polymer center and power grid side mesh keeping your head cooler during the ride. X-static® and XT2® anti-microbial/anti-odor padding keep the inside of the helmet a much nicer place to be. Key Features: Intended for BMX, Downhill or All-Mountain use,Aerospace composite shell,Lightest Composite DH/BMX Race helmet we have ever built 1050g (+/- 50g and Size M),MIPS C2 brain protection system-protects against rotational impacts,24 total vents: 10 front intake ports, 5 overhead intake vents that channel air on top of your head and an industry leading 7 rear exhaust ports,3 Shell sizes and 3 EPS sizes, 6 total size ranges from XS-XXL,Anti-Microbial/Quick Dry XT2® Quick release contoured 3D cheek pads create an ,anatomically optimized fit. Separately placed X-Static® & XT2® precision fit headliner with 7 anchor points gives you optimal fit,EPP Collarbone impact system; a relief area reduces the forces in the center lower section of the helmet where shoulder/collarbone impacts have been known to occur,Drawstring helmet bag included, 3-year warranty,CERTIFIED FOR: ASTM F1952 DH MTB, ASTM F2032 BMX, CPSC 1203, CE N1078, AS/NZS 2063.
Troy Lee Designs’ all-new A3 helmet builds on the success of the TLD A2 helmet to deliver the ultimate in full coverage premium trail helmets.Safety is front and centre with the A3. The helmet is made from EPS and EPP foams for equal protection across high and low-speed impacts. The A3 uses MIPS technology to offer the best protection. The A3 also extends lower than previous TLD helmets, to offer the best lower head coverage.Every detail of the A3 has been obsessed over. The adjustable visor has goggle storage and attaches in three positions with magnets, so it is easy to move as well as avoiding any small parts breaking. The helmet closes with a V2 Fidlock-Magnetic Buckle for easy on and off. TLD has also made sure the helmet works with a vast array of optics making it a great choice for riders, regardless of eyewear choice.Key FeaturesThe latest evolution in TLD trail helmets with MIPS Technology,Adjustable visor with goggle storage and Automatic Magnet System,EPS and EPP for high-speed and low-speed impact energy management,Smart shear visor screws to prevent damage to the helmet,TLD V3 precision fit with 3 levels of height adjust,TLD’s deepest coverage half shell helmet,16 vents with optimised channelling for breathability,Removeable Sweatglide system for hygiene,2-piece antimicrobial and quick dry liner,V2 Fidlock-Magnetic Buckle,Weight: ~375g.
The D4 Carbon helmet is the latest in the legendary Troy Lee Designs Daytona series. The D4 Carbon builds on the success of the best full face helmets ever to be the most advanced downhill, freeride, and BMX helmet going. It is sure to continue the legend and pro success of Troy Lee Designs D3 and is the go-to for anyone seeking the very best.The D4 Carbon helmet has a TeXtreme carbon fibre shell. The carbon has a spread tow construction that uses straighter fibres than standard carbon fibre. This results in a thinner laminate that reduces weight while achieving a greater rigidness, increased strength, and improved impact tolerance.The MIPS Brain Protection System in the D4 means the Troy Lee helmet delivers ultimate protection. MIPS is a layer in the helmet that allows the head to slide relative to the helmet. This reduces any rotational movement that would affect the brain.A collarbone suspension system improves safety by directing pressure away from the collarbone in case of any tumbles.As a result, The D4 has the most protective energy system Troy Lee Designs has ever given its riders. The new full face mtb helmet is certified to CPSC 1203, CE EN1078, ASTM F1952 (DH), and ASTM 2032 (BMX) safety standards.Top protection, badass looks, and a pedigree that no one can touch. The D4 is set to continue Troy Lee Design’s legacy for years to come.Key Features:TeXtreme® Spread tow carbon fibre shell,MIPS Brain Protection System,Ventilation channels and headliner promote airflow,Lightweight titanium D-rings and hardware,Collarbone suspension system,Break-away visor screws,Quick release XT2 3D cheek pads and X-static/XT2 washable liner,Includes TLD drawstring helmet bag,1000g.
The Troy Lee Designs Rockfight CE Chest Protector isn’t your typical chest protector. TLD has taken its standard Rockfight but souped it up to withstand whatever the elements throw at you.The base Rockfight has built-in EPP on the chest and spine that manages low-speed impacts but the Rockfight CE combines it with a removable, flexible D30 back insert for harder impacts. In the process, Troy Lee Designs has created a chest protector that exceeds CE EN1621 Level 1 for impact absorptions.The Rockfight CE has a CE EN14021 Stone Shield certificated front plate providing protection from roost and lofted debris that might come flying your way on the trails.The Rockfight CE achieves its superb protection while ensuring an ergonomic and breathable design. It has form fit side plates, fully adjustable shoulder straps, and removable shoulder pads and allows neck brace compatibility on most models.The construction is also featherweight and with a streamlined fit for easy wearing underneath a jersey and to minimise fatigue, so you can keep riding all day.Key Features: CE EN14021 Stone Shield certification of front plate for proven protection from debris, Flexible D30 back inserts that exceed CE EN1621 Level 1 for impact absorption, Advanced integrated EPP in key impact zones on chest and spine, Form fit side flex plates, fully adjustable fore/aft shoulder straps and removable shoulder pads allows neck brace compatibility, Featherweight construction and streamlined form fit for reduced rider fatigue and sub jersey fitment, Ultra-ventilated protective plates coupled with engineered channelled bi-foam for increased laminar airflow.
The Troy Lee Designs 6400 Knee Brace is a lightweight and comfortable brace for any rider needing stability and protection for their knees.The 6400 Knee Brace has bilateral support hinges that use hyperextension stops to support and help prevent knee injury. The X-Fit Strap System prevents bunching that could limit movement and create discomfort while out on the trails. Adjustment upper and lower compression straps allow a customised fit. Thermoplastic knee pads are covered in an abrasion resistant material for durability and longevity. This brace is ideal for anyone riding mountain bike but is also usable for snowboarding, skiing, and motocross.Key Features: X-Fit Strap System, Bilateral Support hinges and impact absorbing base pads, Thermoplastic knee protection, Compression fit straps for tailored fit, Abrasion resistant kneecap, Moisture-wicking frame liners, Sold in pairs – left and right, 1-year limited warranty. .
Young gravity addicts will love the Troy Lee Designs Youth Rogue Elbow Hard Shell Guards, which will protect their elbow and forearm as they hurl themselves downhill.Like a standard cycling helmet, it’s composed of a hard-shell plastic outer layer that disperses impact over a large area, while allowing heat and moisture to escape through spaced vent holes, and a soft EVA foam inner layer, which absorbs and lessens that impact. The two layers, working together as part of a highly flexible, comfortable and breathable pad, will reinforce your young ripper’s elbow joint while allowing them to move freely, so that they’ll barely notice they’re wearing a guard.A stretchy sleeve of material extends from one side of the pad to the other, acting as a cradle for the inner arm and helping to hold the pad in place. The pad can also be cinched snugly round the arm using two adjustable straps.Perfect for giving youngsters the confidence to ride their best, it comes with its own protective, mesh lined bag that will keep it fresh between sessions. Key Features:CE certified to EN 1621-1 Level 1 standard,Ventilated hard shell plastic outer layer,Soft, EVA foam inner layer,Adjustable elastic strips for a secure fit,Sold as a pair, left and right.
The Troy Lee Designs Stage full face helmet with MIPS is a lighter, cooler and more protective enduro racing package than anything previously created.The Stage combines MIPS (Multi-directional Impact Protection System), EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that sets the standard for mountain bike enduro helmets.A Polylite shell with fibre reinforcement and Polyacrilite injected chin bar with EXOskeleton adds strength without sacrificing weight.11 high-flow air intakes and 14 exhaust ports and large ventilation chin bar openings aid in cooling and comfort in all conditions.The TLD Stage Helmet also includes an X-Static® helmet liner that is moisture-wicking, quick-drying and odor-fighting. A Fidlock® buckle and lightweight hardware round out the overall package.Key FeaturesPolylite Shell construction with fibre reinforcement,Dual-density EPS and EPP foam offers protection against high and low-speed impacts,Featuring MIPS Brain Protection System: a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from angled impacts to the head,Large ventilation chin bar opening and 11 high-flow intake ports and 14 exhaust vents,Contoured 3D XT2 cheek pads and washable X-Static liner create an optimized fit,Innovative break-away visor screws,Fidlock® magnetic buckle system,Includes TLD helmet bag.
If you’re a gravity addict, the Troy Lee Designs Rogue Elbow Hard Shell Guards will protect your elbow and forearm as you hurl yourself downhill.Like a standard cycling helmet, it’s composed of a hard-shell plastic outer layer that disperses impact over a large area, while allowing heat and moisture to escape through spaced vent holes, and a soft EVA foam inner layer, which absorbs and lessens that impact. The two layers, working together as part of a highly flexible, comfortable and breathable pad, will reinforce your elbow joint while allowing it to move freely, so that you’ll barely notice you’re wearing a guard.A stretchy sleeve of material extends from one side of the pad to the other, acting as a cradle for your inner arm and helping to hold the pad in place. You can also cinch the pad snugly round your forearm using two adjustable straps.Perfect for giving you the confidence to ride your fastest, it comes with its own protective, mesh lined bag that will keep it fresh between sessions. Key Features:CE certified to EN 1621-1 Level 1 standard,Ventilated hard shell plastic outer layer,Soft, EVA foam inner layer,Adjustable elastic strips for a secure fit,Sold as a pair, left and right.