A clean bike is a happy bike! Keeping your bike clean is an essential part of bicycle maintenance ensuring better performance, increased safety, easier repairs, increased life of all parts of the bike, and more fun on your next ride!Pedro's Pro Brush Kit offers a set of four unique brushes designed specifically to easily and quickly clean all parts of the bike. Made with the user experience and durability in mind, each brush's ergonomic handle fits well in your hand while offering unmatched durability. The bristles of each brush, which vary in diameter, length, and density , have been selected to give a balance of durability, cleaning performance, and gentleness to match each brush's intended usageThe frame and wheel brush is perfect for quickly cleaning large areas of the bike like the frame, fork, tires, and more. The large surface area and low stiffness bristles easily and quickly cover large areas. Pedro's Toothbrush is designed to tackle the drivetrain and is ideal for cleaning chains, cogs, derailleurs, and chainrings. The ergonomic handle is paired with two purpose built brush features. The tapering length bristles up front are designed to scrub the intricate surfaces of chains, chainrings and cassettes while at the opposite end, longer, stiffer, larger-diameter bristles reach deep between the cassette cogs removing even the deepest dirt and grime. The cone brush is perfect for tackling hard-to-reach spots on frames, forks, and wheels. Designed with a tapering array of small diameter bristles, the cone brush can be pushed into tight areas other brushes cannot reach. The parts cleaning brush is designed for applying degreaser. This brush works like a paint brush with long dense bristles which effectively hold degreaser and allow it to be painted on to all surfaces of drivetrain parts. Lastly the Pro Brush Kit includes a nylon bag perfect for conveniently storing your brushes or bringing them to an event
Refresh and restore your DMR Vault pedals with this service kit.2x Sealed bearings2x Plain bearings1x M6x0.75 5 deep right hand thread1x M6x0.75 5 deep left hand thread2x End cap: M14x1x112x Washers2x Internal Rubber SealsDMR Vault Pedal Spares and Service Kit includes:2x Sealed bearing number: 686ZZ - 6mm Ø ID (Internal Diameter) 13mm Ø OD (Over All Diameter) 5mm Width2x Plain bearing (bushing) 12mm Ø ID (Internal Diameter) 14mm Ø OD (Over All Diameter) 12mm WidthNuts:1x M6x0.75 5 deep right hand thread (left hand pedal) (to be fitted with a 8mm socket)1x M6x0.75 5 deep left hand thread (right hand pedal) (to be fitted with a 8mm socket)2x End cap: M14x1x112x Washer: 6mm Ø ID (Internal Diameter) 9mm Ø OD (Over All Diameter) 1mm Width2x Internal Rubber Seals
Replace existing floor pump head and hose with this Topeak TwinHead and long hose that is compatible with Presta and Schrader valves.
This genuine replacement kit allows you to convert the axle size of your Pro2 or Pro4 rear hub to fit, allowing you to take your reliable Pro hubs with you to your next bike.
By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Manufacturer's Part Number: WTISABCONVKIT Black Option 1 IS-AB WTISEVCONVKIT Black Option 2 IS-EV WTISIICONVKIT Black Option 3 IS-II
The Helmet Mount Bracket Kit has an injection moulded plastic design for a weatherproof, durable construction and will fit to a large range of vented helmets
Shelter Wheel Kit is made of 35 washers that fit snugly over the valve stem, gluing at its base, with an elegant and almost invisible silencing effect.It's also great to balance wheels, with an additional vibration-reducing action.Key Features:Eliminates valve noises, especially on high-profile rims,Shelter washers can be used to finely balance wheels,Visco-Elastic behaviour reduced vibrations.How to silence valves:Shelter Wheel Kit is made of 35 washers that fit snugly over the valve stem, gluing at its base. With minimum bulk and weight, they provide an elegant and almost invisible silencing effect, cancelling unwanted valve movements and vibrations. The re-sealable bag makes sure washers retain their properties if needed for successive applications.Once Shelter washers are applied on the rim, it’s possible to remove the valve an re-insert it without loosing the silencing effect. This is just one application of our Shelter Wheel Kit, but there’s more.Nobody would drive a fast car whose wheels haven’t been carefully balanced after mounting tyres on.Current high performance bicycle wheels, with fancy ceramic bearings, lightweight carbon rims, cannot deliver their full potential if not properly balanced.It’s an easy task that only requires a Shelter Wheel Kit, a wheel truing stand (or a bicycle turned upside down..), patience and some minutes per wheel.Much nicer and effective than electrical tape to silence valves on high-end wheelsMuch nicer (and effective) than electrical tape to silence valves on high-end wheelsHow to balance wheels:Mount the tyre (and eventually disk) on the wheel, so that the wheel is in its rideable form.IMPORTANT: if balancing a tubeless wheel, make sure there’s very little or no liquid sealant inside (that can be added later). Liquid sealant spreads while riding without creating wheel unbalance, but it will interfere with static balancing.Place the wheel on a truing stand and make sure it can rotate freely.With a gentle push, make the wheel spin. After a few complete rotations in the direction of the push, the wheel will enter a pendulum phase where it makes partial rotations, back and forth. Behaving like a pendulum, the excess of weight on the wheel is subject to a restoring force (due to gravity) that accelerates it toward the equilibrium position. Amplitude of swings will reduce until the wheel stops: the lowest point is where the excess weight is.Often wheels stop with the valve at the lowest point… but sometimes uneven weight distribution on the tyre or less-than-accurate carbon fiber lay up overcompensate that, and the lowest point is not corresponding to the valve.Keeping the lowest point of the rim/tyre as reference, identify the opposite point on the rim (you can find it using a ruler, aligned with the lowest point and the wheel axle) and adhere a Shelter washer there.Repeat the process from #1. Each time the heaviest point may move slightly (because of friction in the hub), but it will normally remain within a +-10 cm (4 inches) range.The wheel is balanced when, upon making it turn, IT WILL STOP WITHOUT ENTERING THE PENDULUM PHASE (it won’t change its rotation sense). With each subsequent spin, the lowest point when the wheel stops is a random point on the circumference, changing every time and depending on bearing friction.Washers can be adhered one on top of the other, or side by side, on top of the rim or on its side (depending on rim profile/size).A good trick, although not always possible, is finding a spoke that’s close to the lightest point of the wheel and cutting the washer on one side, so that the washer can be put around the spoke.Each Shelter washer weights around 1 g. Typical wheel unbalance ranges from 4 to 12 grams.Visco-elasticity reduces vibrations:That’s an added bonus when balancing a wheel with Shelter washers.The transmission of vibrational energy through any structure can be reduced by introducing visco-elastic materials at discrete points. It’s exactly what Shelter does, contributing to reduce vibrations on very stiff wheels.
Wolf Tooth Shimano Remote Clamp Conversion KitThis conversion kit allows you to attach a Wolf Tooth Dropper Lever to a Shimano I-Spec brake lever.By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Features: Material: Delrin and Aluminium Use: MTB or Road Compatibility: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu) Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano Remote Clamp Conversion KitThis conversion kit allows you to attach a Wolf Tooth Dropper Lever to a Shimano I-Spec brake lever.By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Features: Material: Delrin and Aluminium Use: MTB or Road Compatibility: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu) Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano Remote Clamp Conversion KitThis conversion kit allows you to attach a Wolf Tooth Dropper Lever to a Shimano I-Spec brake lever.By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Features: Material: Delrin and Aluminium Use: MTB or Road Compatibility: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu) Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Dropper Remote Clamp Conversion KitThe Wolf Tooth Remote Clamp Conversion Kit attaches to bars with a 22.2mm diameter. Featuring delrin and aluminium parts, this kit offers durable and reliable performance alongside your Wolf Tooth ReMote dropper lever (available separately).Features: Material: Delrin and Aluminium Use: MTB Diameter: 22.2mm Type: 22.2mm Flat bar clamp conversion kit Compatibility: Wolf Tooth ReMote seat postTechnologies: Cable clamping bolt is a M4 x 6mm socket head cap screw with an M4 flat washer. Delrin and aluminium parts. For 22.2mm handlebar clamps, attach with 1 NM max (it does not take much!).Manufacturer's Part Number: WTCLMP22KIT Black 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.