The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance.The BKD-1.2 is built for the rigors of daily commercial use, and includes two syringes, hoses with shutoff clips, multi-size bleed blocks and a unique attachable syringe mount, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case.
Key Features: Park Tool have put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle,A perfect way to start or add to your collection of shop quality bicycle tools,Now includes the latest volume of the Big Blue Book, BBB-4,The AK-5 includes a tough toolbox to protect your investment,All tools covered by Park Tool's legendary limited lifetime warranty.
The IR-1.2 speeds the internal frame routing of electric wires, shift cable/housing, brake cable/housing and hydraulic tubing on carbon fiber, titanium, and aluminum frames.Kit includes four plastic coated 250cm cables with attached magnets and unique fittings plus an external guide magnet to speed operation.Newly updated to include a dedicated E-tube Di2 cable connector that easily pulls through a 6mm frame hole.Opposite polarity magnets on cables seek and attach inside frame tubes, making it easy to route through frame entrances and exits.Works with any size frame including tandems.A true time and frustration saver.
Key Features: The DT-3i.2 Dial Indicator Set bolts directly to the DT-3 allowing for greater accuracy and a way to measure results,Now includes an elongated, cylindrical tip that is large enough to work around voids in most rotors.
Key Features: The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components,Utilizing expanding collets, an extendable shaft and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact,The SHX-1 is compatible with cartridge bearings with inner diameters from 6mm to 32mm, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets,Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed.
Key Features: A perfect way to start a bicycle tool collection!,A great combination of tools to help a home mechanic clean, adjust, maintain, and do some basic repairs on their bike,The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks, and includes a custom Park Tool toolbox with extra room for spare parts and more tools .
Features:A neat puncture repair kit with tyre levers,Three high strength tyre levers clip together for storage,Six reliable and durable Park patches,One piece of sand paper for preparing the inner tube surface,No tube of adhesive required,.
The Vulcanizing Patch Kit includes six thin and flexible patches with tapered edges to blend perfectly with the profile of the inner tubeFour round patches are 25 mm in diameter for smaller holesTwo oval patches, 25 mm x 35 mm, are for wider cutsA tube of self-vulcanizing fluid chemically bonds the patch to the tube for a permanent repairEach kit is packaged in a small plastic box with sandpaper for cleaning the tube and instructions
Punctures are never convenient, but this is the most convenient way to mend a punctureSaves time because you don't have to wait for the glue to dryYou can be sure of a reliable seal, because you stick the patch on when you are ready, not when you think the glue might be readyA waterproof box containing 6 self-adhesive patchesThe special adhesive was developed with 3M, resulting in a patch that will flex with the tubeSandpaper for tube preparation includedYour lightweight and tiny trail friend
Key Features: The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots,A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters,Combined with our proven bearing press design, the SBK-1 quickly and easily pushes ,the old bearing out of the linkage, and reinstalls the new bearing precisely and squarelyOrganized in a convenient storage case to keep everything in one place,NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The CG-2.4 contains everything needed to quickly and easily clean the chain cogs and chainrings: CM-5.3 CYCLONE™ CHAIN SCRUBBER Clean bicycle chains quickly easily and effectively without the hassle and mess of removing the chain from the bike. The CM-5.3 uses an extra-large solvent reservoir and a series of four rotating brushes to get chains sparkling clean inside and out. A magnet at the bottom of the CM-5.3's solvent reservoir draws away particles scrubbed from the chain effectively keeping them from being redistributed on the chain during cleaning. The durable sponge material draws solvent from the chain as it exits the CM-5.3 reducing drips and mess. The CM-5.3 can handle any bike-specific chain from wide 3/16' single-speed* to narrow 12 and 13-speed. A reversible handle allows the chain to pass through forwards or backwards for compatibility with center drive e-bikes. CB-4 BIO CHAINBRITE Park Tool CB-4 is a 100% biodegradable natural plant-based degreaser formulated for use in the CM-5.3 Cyclone Chain Scrubber CM-25 Professional Chain Scrubber or with a scrubbing brush as a general purpose degreaser. When used with a chain cleaner CB-4 gets bicycle chains clean inside and out so they're good as new. Will not harm alloy plastic rubber or carbon fiber parts so it's safe to use for cleaning cassettes chainrings pulleys or any other component that accumulates muck and grime. GSC-1 GEARCLEAN™ BRUSH The GSC-1 is specially designed to free your bicycle drivetrain from muck and grime. The comfortable handle features a contoured toothed end to reach dirt deep between the gears and tough nylon bristles clean the derailleur and chain. Saves wear and tear on your chain and cassette. Also works great on derailleur pulleys brakes or other places where dirt collects. CG-2.4 FEATURES The Chain and Drivetrain Cleaning Kit includes: CM-5.3 Cyclone™ Chain Scrubber GSC-1 GearClean™ Brush 8 oz. bottle of Bio ChainBrite™ The CG-2.4 works on nearly any bike including multi-speed single-speed and e-bikes. INCLUDES: CM-5.3 Cyclone™ Chain Scrubber — Instructions GSC-1 GearClean™ Brush CB-4 Bio ChainBrite™ — Instructions
A perfect way to start a bicycle tool collection! A great combination of tools to help a home mechanic clean adjust maintain and do some basic repairs on their bike. The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks and includes a custom Park Tool toolbox with extra room for spare parts and more tools. INCLUDES: AWS-10 Fold-Up Hex Wrench Set BBB-4 Big Blue Book of Bicycle Repair — 4th Edition CC-3.2 Chain Checker CN-10 Professional Cable and Housing Cutter CT-5 Mini Chain Tool FR-5.2 Cassette Lockring Tool GSC-1 GearClean™ Brush HCW-16.3 Chain Whip / Pedal Wrench HR-8 8mm Hex Wrench MLP-1.2 Master Link Pliers SD-2 #2 Phillips Screwdriver SW-7.2 Triple Spoke Wrench TL-1.2 Tire Lever Set TWS-3 3-Way Torx® Compatible Wrench — T10/T25/T30