Zipp's Vuka Clip Risers are designed for use with the Vuka Alumina Clip s above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system. Each size of risers is sold separately in packs of two. Risers cannot be stacked.
Introducing the Brand-X Ascend Paddle Lever Kit (2x-3x Gears). This ergonomic paddle style remote lever is designed to sit next to your front shifter, allowing you to run your Ascend dropper seatpost when using a front derailleur and shifter.Material: AL7075-T651Bar mounted paddle style remote leverCable operatedCable Length: 1.5mFinish: Sand blasted and hard anodised black
Brand-X's Ascend CX Paddle Lever Kit includes the paddle lever, cable outer, cable inner, guide pipe with barrel adjust, cable end cap and cable barrel for post fitment. This kit allows the easy replacement of the ergonomic paddle lever.Material: T651-7075 AluminiumTo Fit: 31.8mm handlebar diameterBar mounted paddle style remote leverLinkage mechanism eliminates any outer cable pullCable operatedCable Length: 1.5mFinish: Sand blasted and hard anodised
The Micro Pro is the classic Dynaplug tool; super compact, weatherproof and beautifully machined. There when you need it, hassle free when you don't. No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMicro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhereKit includes the tool, 2 x stainless steel insertion tubes, 5 x soft nose standard plugs, 1 x micro knife, 1 x air stopper and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageThe Micro Pro is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for a big day out, including multiple pre-loaded Dynaplug insertion tubes, an air stopper tool for helping to prep the hole for insertion and a micro knife for cutting the plug tail. Despite all this, the Micro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhere.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Micro Pro is the classic Dynaplug tool; super compact, weatherproof and beautifully machined. There when you need it, hassle free when you don't. No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMicro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhereKit includes the tool, 2 x stainless steel insertion tubes, 5 x soft nose standard plugs, 1 x micro knife, 1 x air stopper and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageThe Micro Pro is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for a big day out, including multiple pre-loaded Dynaplug insertion tubes, an air stopper tool for helping to prep the hole for insertion and a micro knife for cutting the plug tail. Despite all this, the Micro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhere.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
This genuine DMR V8 Pedal Service Kit includes the following:2 x Plastic End Caps2 x External Shields2 x Internal Seals52 x Precision ground 5/32 balls
The easy bleed kits make bleeding your Hope brakes simple and easy. Coming with everything you need to get your brakes back to as good as new.Includes funnel, bleed hose, 250ml bottle of DOT 5.1 Fluid and a specially designed reservoir cap and seal.Only compatible with Hope Tech / Tech Evo brake levers - NOT compatible with Tech 3 Levers
Set of springs for Hope Pro 2 Pawls. Replace springs if you are replacing pawls anyway, or replace broken springs.
Whether you've lost a valve cap or just want to bling your existing pair of Peaty's valves, this kit gives you everything you need. Compatible with all Peaty's Tubeless Valves. Includes: 1x spoke key cap (for 3.4mm spoke nipple), 1x valve core remover cap & 2x lock rings.
Introducing the Granite Design Stash Tyre Plug Handlebar Kit, perfect for those that like to ride without a rucksack, and it means you ll always have it with you to fix your tyre. Weighing in at only 35 grams, the kit stashes away inside your handlebar, ready for the unexpected. It s so small and invisible; you ll forget you have the kit until you pop! Stash Tyre Plug Kit includes a Tyre reamer, a Tyre fork, and 4 Tyre plugs. The kit also comes with 2 end cap sizes to allow seamless installation with open-end grips or lock-on grips.Dimension: 30 x 30 x 96mm (large cap) / 21.8 x 21.8 x 96mm (small cap)Weight: 35g (incl. side cap)Fitting: Open-end grip or lock-on grip with 18 to 21mm orifice and 10cm straight section at the bar endColour: OrangePackage Content: Tyre plug kit (Reamer, fork and centre tube), 2 x 1.5mm and 2 x 3.5mm Tyre plugs, expansion rubber, 30mm side cap and 22mm side cap.
The RRP ProGuard Bolt-On SR Suntour Sleeve Kit is for use with the ProGuard Bolt-On Mudguard and SR Suntour forks that have a straight through unthreaded hole in the centre of the fork brace. The Sleeve Kit allows you to fit the ProGuard Bolt-on to the fork, giving you excellent protection from the elements. Fits most SR Suntour suspension forks.
For 68mm wide BB30 frames. Ceramic bearings for minimum friction and maximum durability.Stainless steel BB30 cartridge bearingsWave Spring and circlips includedNylon adjustment washers included