BOX Concentric Cable Kits are among the most advance BMX brake cables on the market, starting with the custom Concentric housing, which includes aramid fiber-wrapped Aluminum/Steel linear wires for the best combination of strength and low weight.The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminum Kollars™ ferrules further reduce cable drag.Each cable kit includes 79 inches of Concentric Linear housing, a black PTFE-coated Nano Cable, two color-matched and two alloy Kollars™ ferrules and one color-matched and one black alloy cable end caps.Key Features:Available in chrome, 14K Gold, Red, Blue and Black with color-matched alloy Kollars ferrules and end caps,Weight: 70 grams/2.46 ounces (Colors) 100 grams/3.52 ounces (14K Gold & Chrome),Rear Cable Length (mm) 2100,Housing Length 2000mm,Cables PTFE Coated.
Extruded and CNC-machined from 6061-T6 aluminum, the BOX Zero Stem Spacers feature an ultra-minimalist design that is super lightweight. Weights range from 0.02 to 0.14 ounces (0.56 to 4 grams), depending on the size.Sold in packs of five, including two 1-millimeter and one each 3-, 5- and 10-millimeter heights, the set provides spacing adjustments from 1 to 20 millimeters.Available in anodized Red, Blue, Gold and Black to fit 1” and 1 1/8” forks. For the best performance, stack the spacers so the vertical supports are in alignment. Maximum recommended user weight is 120 pounds. Weight:1”-6.7 grams/0.23 ounces,1 1/8”-8.2 grams/0.28 ounces.
Introducing the Brand-X Ascend Dropper Seatpost shifter style lever kit. The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL6061-T6Bar mounted shifter style remote leverCable Length: 1.5mWeight: 40.7g (excluding cable)Adjustment: +10 degrees angle range and +7mm horizontal adjustmentFinish: Sand blasted and hard anodised blackWarranty: 2 Year
Introducing the Brand-X Ascend Paddle Lever Kit (2x-3x Gears). This ergonomic paddle style remote lever is designed to sit next to your front shifter, allowing you to run your Ascend dropper seatpost when using a front derailleur and shifter.Material: AL7075-T651Bar mounted paddle style remote leverCable operatedCable Length: 1.5mFinish: Sand blasted and hard anodised black
Brand-X's Ascend CX Paddle Lever Kit includes the paddle lever, cable outer, cable inner, guide pipe with barrel adjust, cable end cap and cable barrel for post fitment. This kit allows the easy replacement of the ergonomic paddle lever.Material: T651-7075 AluminiumTo Fit: 31.8mm handlebar diameterBar mounted paddle style remote leverLinkage mechanism eliminates any outer cable pullCable operatedCable Length: 1.5mFinish: Sand blasted and hard anodised
Introducing the Brand-X Ascend Dropper Seatpost shifter style lever kit. The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL6061-T6Shimano I-Spec mount shifter style remote leverCable Length: 1.5mWeight: 40.7g (excluding cable)Adjustment: +10 degrees angle range and +7mm horizontal adjustmentFinish: Sand blasted and hard anodised blackWarranty: 2 Year
The Brand-X Front Boost Conversion Kit allows for a 15x100mm hub to be converted to 15x110mm Boost spacing. This conversion kit includes two axle spacers, a 6-bolt rotor spacer and rotor bolts for straightforward installation. Designed to work with most 15mm non-Boost hubs, it is also recommended to check with your specific hub manufacturer for full compatibility. This kit is specifically developed to allow a 15x100mm hub to be converted to 15x110mm Boost spacing. Genuine Brand-X spare parts.Compatibility: Most 15mm non-Boost hubsIncludes: 2 x Axle spacers, 6-bolt rotor spacer and rotor boltsConversion: 15x100mm to 15x110mm
The Brand-X Rear Boost Conversion Kit allows for a 142x12mm hub to be converted to 148x12mm Boost spacing. This conversion kit includes two axle spacers, a 6-bolt rotor spacer and rotor bolts for straightforward installation. Designed to work with most 142mm non-Boost hubs, it is also recommended to check with your specific hub manufacturer for full compatibility. This kit is specifically developed to allow a 142x12mm hub to be converted to 148x12mm Boost spacing. Genuine Brand-X spare parts.Compatibility: Most 142mm non-Boost hubsIncludes: 2 x Axle spacers, 6-bolt rotor spacer and rotor boltsConversion: 142x12mm to 148x12mm
The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL7075-T651Bar mounted shifter style remote leverCable operatedCable Length: 1.5mFinish: Sand blasted and hard anodised black
Available in both internally and externally routed options, this seat post maintenance kit is ideal for helping you repair and maintain your Brand-X Ascend dropper seat post. Internally routed options include OE replacement seals, bushing and brass keys.Externally routed options include OE replacement seals, bushing, brass keys and nylon cable & barrel.Each maintenance kit is unique to each travel option and is not cross-compatible. Please ensure that you marry up the correct kit to the routing and the travel of your Brand-X Ascend post.Please double check your own dropper post prior to purchasing the kit. The internal routed Ascend posts were updated in 2020.
Shifter Style - 1x Gears The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit and actuates from beneath the handlebar meaning that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur. Paddle Style - 2x/3x Gears The compact paddle style remote lever is designed to sit next to your front shifter and actuates from the top of the handlebar, allowing you to run your Ascend dropper seatpost when using a front derailleur and shifter.
The kit includes paddle lever, cable outer, cable inner, guide pipe with barrel adjust, cable end cap and cable barrel for post fitment. Once fitted, it offers you effortless control of your Brand-X dropper post. Please note: This lever is designed for use on drop handlebar bikes, (cyclocross and gravel bikes), and will not fit on the lever clamp area of an MTB handlebar.