Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Custom cable-set must be used on Time Trial and Triathlon bikes with Vision brake levers.
Each set contains the vital equipment, including high-quality brake fluid, needed to bleed your brakes and keep them in perfect working order so you can push harder on the trails. Features: Compatibility: SRAM 2017+ brakes with Bleeding Edge™ bleed port Liqui Moly brake fluid 250ml DOT 5.1 2 Becton and Dickinson 20ml Luer Lock syringes with long lasting pistons M5 brass fittings precision made on Citizen Swiss Lathe CNC machine Black galvanised steel fitting for Bleeding Edge™ bleed port Quality tight fit German made o-rings Custom drawn BASF Elastollan PU tube Bartec clamps with wider anatomic grip Luer Lock fittings made by Injectech USA Universal Bleed block for two and four piston brakes Spare o-rings Instruction manuals
Transfil Mudlovers MTB Brake Cable KitThis high-quality and lightweight brake cable set is perfect for all types of competition MTB riding and road racing. A strong internal liner protects the cables from all impurities in one continuous piece.Features: Material: Stainless steel inner cables; Alloy ferrules & cable ends Use: MTB or Road Excellent quality Lightweight 10 - Alloy ferrules 2 - Stainless steel inner cables 1700mm 2 - Liners 1700mm 2 - Alloy Cable ends 1 - Cable housing 1700mmBuy Transfil Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bleed Kit Premium Formula Cura Brake Bleed KitThis Premium Edition bleed kit includes absolutely everything for bleeding Formula Cura hydraulic brakes.CompatibilityBleedkit.com's Premium GOLD Cura edition kit includes absolutely everything for bleeding Formula Cura hydraulic brakes. Not compatible with older type DOT based Formula hydraulic brakes (Oro, C1, R1, R0, K24, K18...).Features: Gold Hydraulic Oil 100ml 2x 20ml syringe 2x M5 assembly Torx T10 wrench Spare O-rings Bleed block for 2 piston brakes Bleed block for 4 piston brakesTechnologies: Gold Hydraulic Oil: Bleed Kit's own brand of ultra high performance oil for brake systems designed for use with mineral oil.Manufacturer's Part Number: BK-14044 Gold Formula Cura 100mlBuy Bleed Kit Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen Vario Dropper Post Saddle Clamp KitThis kit features a replacement saddle clamp and mounting hardware, so you can easily swap out your old parts and breathe new life back into your setup. Specifically designed for use with the e.thirteen Vario dropper seatpost. Genuine e.thirteen spare parts.Features: Clamp Plates Material: Alloy Hardware Material: Steel T25 bolts with nuts Use: MTB Compatibility: Works with e.thirteen Vario dropper posts Included: x1 upper saddle rail plate, x1 lower saddle rail plate, x2 seatpost head screws/nuts Genuine e.thirteen spare partsManufacturer's Part Number: E13SP2007 BlackBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
FSA Team 30 Spoke KitPerfect for servicing or maintaining your FSA Team 30 wheels, this kit contains INOX Straight 2.0 double-butted aero spokes. Genuine FSA spare parts.Features: Material: INOX Straight 2.0 Use: Road Design: Aero, double-butted Compatibility: Team 30 wheels Manufacturer's Part Numbers: SPK-TEAM30DB-CL Black Option 2 17mm; SPK-TEAM30DB-6B Black Option 1 17mmBuy FSA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The RockShox Rear Shock Air Can Basic Service Kit includes air can seals and a wiper. Designed to fit AM/Monarch B1 (Plus,XX,RL) and C1 (R,RT3) rear shocks. A genuine and original easy to fit RockShox part.
This Reactor Upper Swing Link Kit is for use with the 2020 Nukeproof Reactor frame.Kit Includes:1x NP-107 (Swing Link Pivot Axle)2x NP-108 (Swing Link Pivot Spacer)2x NP-109 (Swing Link Pivot Bolt)