Designed for long expeditions and tough conditions, the Salomon Women's Quest 4 Gore-Tex Hiking Boots are highly protective, supportive and grippy. Featuring an updated chassis, the ADV-C 4D Chassis respects the natural flexion of your foot by targeting sensitive articulations and wraps the foot for extra support, while also keeping your stride fluid and reducing muscle fatigue especially with a heavy backpack. Additionally, the EnergyCell midsole and moulded OrthoLite® sockliner lends supreme cushioning to where it is needed most. For optimum protection, a waterproof, breathable Gore-Tex membrane and PFC-free water repellent Nubuck leather and textile upper keep every ounce of water out, as well as offering hardwearing durability and ventilation to keep feet cool. A protective toecap and mudguard also reduce the likelihood of dirt and debris from entering the boot, while SensiFit™ technology adds a secure, locked-down fit. To finish, a Contagrip® TD outsole with a deep, aggressive lug pattern provides high performing grip and traction on a variety of wet and dry surfaces.
Designed for long expeditions and tough conditions, the men's Salomon Quest 4 Gore-Tex Hiking Boots are highly protective, supportive and grippy. Featuring an updated chassis, the ADV-C 4D Chassis respects the natural flexion of your foot by targeting sensitive articulations and wraps the foot for extra support, while also keeping your stride fluid and reducing muscle fatigue especially with a heavy backpack. Additionally, the EnergyCell midsole and moulded OrthoLite® sockliner lends supreme cushioning to where it is needed most. For optimum protection, a waterproof, breathable Gore-Tex membrane and PFC-free water repellent Nubuck leather and textile upper keep every ounce of water out, as well as offering hardwearing durability and ventilation to keep feet cool. A protective toecap and mudguard also reduce the likelihood of dirt and debris from entering the boot, while SensiFit™ technology adds a secure, locked-down fit. To finish, a Contagrip® TD outsole with a deep, aggressive lug pattern provides high performing grip and traction on a variety of wet and dry surfaces.
The waterproofing and breathable functioning of the TX5 GTX Boots are thanks to an advanced GORE-TEX membrane that works in unison with the Nubuck leather uppers to create an all around protective shoe with reinforced rubber toe caps and rubber profiling. The mid cut design protects the heel from stones and mud with a 3D Flex system attaining maximum foot postioning and freedom of movement. Underneath the shoe sits a thick, Vribram mega grip outsole with differentiated lugs and an impact brake system for enhanced impact and shock absorbtion. This results in maximum performance, grip and comfort over long, challenging hikes.
The waterproofing and breathable functioning of the Women's TX5 Gore-Tex® Walking Boots are thanks to an advanced Gore-Tex® membrane that works in unison with the Nubuck leather upper to create an all around protective shoe with reinforced rubber toe caps and rubber profiling. The mid-cut design protects the heel from stones and mud with a 3D Flex system attaining maximum foot positioning and freedom of movement. Underneath the shoe sits a thick, Vibram mega grip outsole with differentiated lugs and an impact brake system for enhanced impact and shock absorption. This results in maximum performance, grip and comfort over long, challenging hikes.
Chris King InSet 2 HeadsetInSet™ is the latest addition to the Chris King® NoThreadSet™ family. InSet™ is a low-stack threadless headset designed for use with contemporary frames featuring what would traditionally be called "oversized" headtubes.As times have changed, so have the designs of bicycles. These new large headtubes allow frame manufacturers greater surface area on which to attach top tubes and downtubes with the overall result being improved frame strength and rigidity. Chris King pride themselves on adapting Chris' forward-thinking original modular designs into ever-evolving configurations to meet most new bicycle designs. The Chris King® InSet™ now brings King's legendary bearing quality and time-tested durability to even more bicycle models.GripLock™ Bearing CapOur InSet headsets feature an all-new bearing cap design. GripLock™ is a multi piece bearing cap that utilizes a split ring that improves steerer tube interfaceFor tapered 1-1/8” to 1.5” steerer tubes but can be used with 1-1/8” steerer tubes by purchasing a Devolution 1.5 to 1-1/8” Baseplate/crown race.Features:Steerer Tube OD: 1-1/8” to 1.5” taperedUpper headtube ID: 44mmLower headtube ID: 55.95mmUpper headtube ream depth: 10mmLower headtube ream depth: 15mmFork crown seat OD: 39.8mmUpper stack height: 8.46mmLower stack height: 4.11mmWeight: 150gBuy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Chris King InSet 2 HeadsetInSet™ is the latest addition to the Chris King® NoThreadSet™ family. InSet™ is a low-stack threadless headset designed for use with contemporary frames featuring what would traditionally be called "oversized" headtubes.As times have changed, so have the designs of bicycles. These new large headtubes allow frame manufacturers greater surface area on which to attach top tubes and downtubes with the overall result being improved frame strength and rigidity. Chris King pride themselves on adapting Chris' forward-thinking original modular designs into ever-evolving configurations to meet most new bicycle designs. The Chris King® InSet™ now brings King's legendary bearing quality and time-tested durability to even more bicycle models.GripLock™ Bearing CapOur InSet headsets feature an all-new bearing cap design. GripLock™ is a multi piece bearing cap that utilizes a split ring that improves steerer tube interfaceFor tapered 1-1/8” to 1.5” steerer tubes but can be used with 1-1/8” steerer tubes by purchasing a Devolution 1.5 to 1-1/8” Baseplate/crown race.Features:Steerer Tube OD: 1-1/8” to 1.5” taperedUpper headtube ID: 44mmLower headtube ID: 55.95mmUpper headtube ream depth: 10mmLower headtube ream depth: 15mmFork crown seat OD: 39.8mmUpper stack height: 8.46mmLower stack height: 4.11mmWeight: 150gBuy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Chris King InSet 5 Headset InSet™ is the latest addition to the Chris King® NoThreadSet™ family. InSet™ is a low-stack threadless headset designed for use with contemporary frames featuring what would traditionally be called "oversized" headtubes.As times have changed, so have the specifications of many of the greatest bicycle designs. These new large headtubes allow frame manufacturer's greater surface area on which to attach top tubes and downtubes with the overall result being improved frame strength and rigidity. We pride ourselves on adapting Chris' forward-thinking original modular designs into ever-evolving configurations to meet most new bicycle designs. The Chris King® InSet™ now brings King's legendary bearing quality and time-tested durability to even more bicycle models. GripLock™ bearing cap Our InSet headsets feature an all-new bearing cap design. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface. For tapered 1-1/8” to 1.5” steerer tubes but can be used with 1-1/8” steerer tubes by purchasing a Devolution 1.5 to 1-1/8” Baseplate/crown race. Features: Steerer Tube OD – 1-1/8” to 1.5” tapered Upper headtube ID – 49.61mm Lower headtube ID – 49.61mm Upper headtube ream depth – 16mm Lower headtube ream depth – 20mm Fork crown seat OD – 39.8mm Upper stack height – 8.0mm Lower stack height – 4.0mm Weight – 150g Buy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The quickest and most convenient cycle roof carrier on the marketKey Features:Revised clamp with extended lower jaw holds your bike in place whilst you secure the wheel straps and tighten everything up,Integrated torque limited dial prevents over tightening on lightweight carbon frames whilst ensuring that clamp is still secure,Deep and flexible padding integrated into the 598's jaws adapts to the shape of your frame giving a more secure hold whilst minimising the chances of damage,Smartly designed wheel holders with diagonal straps for a larger contact area and more secure hold. Ratcheting pump-buckles make cinching them up a quick and easy task,Clamp arm can be switched tool-free from one side to the other for mounting on either side of your vehicle,Clamp and mountings are lockable, securing the rack to the car and the bike to the rack,Includes T-track adaptors to fit Thule Wing, Slide, and Aero bars, requires adaptor for square bars,Maximum suggested bike weight: 20 KG,City crash tested and TÃ?V-GS approved.
The LEKI Makalu FX Carbon Trekking Poles are an ideal companion for all mountain adventures. Firstly, they are equipped with an Aergon Air grip. This latest generation of grip is specially tuned for trekking and has been redesigned in terms of comfort and control for optimised support on the trail. The special hollow core technology also allows a combination of lightweight construction with large, supportive surfaces that meet all the ergonomic requirements of your hand. Plus, the fully rubberised grip head of the Aergon Air provides maximum grip and control when going downhill, while the inclined angle supports your wrist for optimal guidance and placement of the pole, as well as contributing to safety on the mountain. To finish, the grip extension provides an additional grip option when walking uphill. With the Lock Security Strap Skin 4.0, you can adjust the strap perfectly to your hand for optimal grip and pressure.
Manufactured to create a precise and functional interface between your frames bottom bracket shell and your 24mm cranks, our ThreadFit™ 24 bottom brackets ensure that your cranks will spin lightly and without interference. To help with bike fit issues we have developed a range of conversion kits that allow our ThreadFit™ 24 to be used with a wide selection of road and mountain bike cranks. As with all Chris King components in our ThreadFit™ 24 bottom brackets it all starts with the bearings. We make our bearings in-house and our process allows us to place more balls per bearing than our competitors. More rolling elements per bearing translates to a stronger overall bearing system. A bottom bracket-specific upgrade to our legendary sealing system allows the bearings to be purged and re-greased using our precision made injector tool. This combination of strength and serviceability gives us the confidence to offer an industry-leading 5-year warranty on our bottom brackets.
Designed for your adventure whether it‘s bikepacking on a packraft or an overnight snowshoe tour. The waterproof Atrack BP features everything required for a bikepacking trip combined with the multiple functions of the Atrack product family. Atrack BP is customized for bikepacking: the hip wings are eliminated the backpack features a slender shape and a helmet fixing and comes in the bikepacking design. Despite its 25 L volume the back carrying system has stepless length adjustability. Breathable back pads and a reduced hip belt in combination with an adjustable back length ensure ideal weight distribution. This Active Travel Backpack model - Atrack BP is waterproof to IP67 ensuring 100% dry gear therefore ideal for biking and sports. The unique position of the waterproof TIZIP zipper in the back panel provides a wide opening with unobstructed access. Digging through the pack - as with classic top loaders - and opening various buckles or straps to find buried items therefore becomes history. A hydration system can be easily integrated and the pack features a sealable drinking tube aperture. Atrack BP is both a fully featured outdoor backpack designed for the special needs of bikepacking and a travel duffle. The modular system and numerous accessories allow rapid individual use-specific modification on your trip – outdoors or in the city. Accessories and compressions straps fix to the daisy chains. Four zippered inner pockets and an internal compression strap aid clean organisation for packing and unpacking. PVC free and sustainably made in Germany. FEATURES+ Outer mesh pockets+ Daisy chains with removable compression straps+ Watertight aperture for drinking tube (hydration system not included)+ Inner compression strap+ Key snaphook MATERIAL PS21R BAG TYPE single ADAPTER - DATASHEET Download 360° VIEW View WEIGHT 1300 gr | 45.9 oz. HEIGHT 56 cm| 22.0 inch WIDTH 26 cm | 10.2 inch DEPTH 25 cm | 9.8 inch VOLUME 25 L | 1526 cu.inch PROPERTIES mig zip nopvc ip67
Stratos 34 brings true innovation and quality to the ventilated pack world.Inspired by Osprey's AntiGravity™ technology, Stratos 34 provides a fully adjustable AirSpeed™ ventilated back system which combines the single piece construction of the backpanel and hipbelt with highly breathable suspended mesh. This allows for increased comfort in warm weather, even with a heavy load.Key Features:Internal key attachment clip,Twin zippered hipbelt pockets,Sternum strap with emergency whistle,Single ice axe loop,Side compression straps,Removable sleeping pad straps,Vertical centred zippered pocket,Adjustable AirSpeed™ ventilated trampoline suspended mesh backpanel,Adjustable torso length,Internal hydration sleeve,Integrated & detachable raincover,Stow-on-the-Go™ trekking pole attachment,Zippered panel access.