Trekking comfort handlebars 610mm wide, swept back for added rider comfort.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
This superb model employs a disciplined approach to manufacturing which includes rigorous quality control and highly developed production protocols. Additionally, you'll benefit from top-notch performance from using this top-end product for your ride. BB Conversion Kit 1: Press Fit 30 BB Shells 68mm Wide BB Shells 24mm Road Cranksets Common Cranks*: Shimano Road, FSA road, Rotor BB Conversion Kit 2: Press Fit 30 BB Shells 68mm or 73mm Wide BB Shells 24mm Mountain Cranksets Common Cranks*: Shimano mtn, FSA mtn, FSA SLK Light, Gravity, Race Face mtn, Rotor, Surly BB Conversion Kit 3: Press Fit 30 BB Shells 73mm Wide BB Shells 24mm>22mm Mountain Cranksets Common Cranks*: SRAM mtn, Zinn mtn, Bontrager mtn, TruVativ mtn BB Conversion Kit 4: Press Fit 30 BB Shells 68mm Wide BB Shells 24mm>22mm Mountain Cranksets Common Cranks*: SRAM mtn, Bontrager mtn, TruVativ mtn, Zinn mtn BB Conversion Kit 5: Press Fit 30 BB Shells 68mm Wide BB Shells 24mm>22mm Road Cranksets Common Cranks*: SRAM road, Bontrager road, TruVativ road, Zinn road BB Conversion Kit 6: Press Fit 24 BB Shells 89.5mm or 92mm Wide BB Shells 24mm>22mm Mountain Cranksets Common Cranks*: SRAM mtn, Bontrager mtn, TruVativ mtn, Zinn mtn BB Conversion Kit 7: Press Fit 24 BB Shells 86.5mm Wide BB Shells 24mm>22mm Road Cranksets Common Cranks*: SRAM road, Bontrager road, TruVativ road, Zinn road
Ritchey WCS Trail Locking Mountain Bike GripsMade with an advanced rubber compound that has a dual-density design, the WCS Trail mountain bike (MTB) grips deliver the control, stability and support you need on the trails. Ideal for all types of off-road riding, your hand will stay firmly in place even as you dive into berms, blast over tree roots, rock gardens and land your jumps. Also, as they come with two locking rings each to secure them to your bars, you can confidently know these grips are going nowhere.Features:Body Material: Dual-density, non-slip Kraton RubberLock Ring Material: Anodised and laser-etched Aluminium Finish: Moulded and raised TR logos Bar Ends Included: Yes Design: Open-endLock Rings: Dual-sided secure lockingUse: Mountain Bike (MTB)Length: 135mmDiameter: 32mm Single or Pair: Pair Weight: 112g (approx.)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ritchey WCS TrueGrip X Locking Bar GripDesigned for mountain bike (MTB) use, this Locking Grip from Ritchey offers exceptional control and comfort when tackling tough terrain. Ready for the challenge, these locking grips benefit from a dual-density rubber construction which gives them precise grip on rough runs. Their non-slip construction combined with a weight of only 93g (approx.) means you can enjoy durable strength without adding unnecessary weight.Features:Material: Dual-density, non-slip Kraton RubberUse: Mountain Bike (MTB)Density: DualShape: Round:Locking: Dual sideEnds: OpenEnd-Plugs Included: YesSingle or Pair: PairLength: 130mmDiameter: 33mmWeight: 93g (approx.)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Made with re-purposed micro baffle fabric to limit the harmful impact of waste on the environment, the Föhn Re-Purpose Packing Cube Set is a practical addition to the eco-explorer's essentials. This micro baffle fabric is the same Nylon ripstop used in Föhn's down jackets, making each cube highly lightweight and durable, while the three sizes ensure there is space for a variety of your gear. A webbing carry handle and zip-around entry on each cube also makes them easy to pack-away and transport. Finished with a Durable Water Repellent treatment.
Re-Purpose Packing Cube SetCombining eco-friendly credentials with optimum functionality, the Föhn Re-Purpose Packing Cube Set is destined for all far-reaching adventures.Made with re-purposed micro baffle fabric to limit the harmful impact of waste on the environment, the Föhn Re-Purpose Packing Cube Set is a practical addition to the eco-explorer's essentials. This micro baffle fabric is the same Nylon ripstop used in Föhn's down jackets, making each cube highly lightweight and durable, while the three sizes ensure there is space for a variety of your gear. A webbing carry handle and zip-around entry on each cube also makes them easy to pack-away and transport. Finished with a Durable Water Repellent treatment. Features:Set of 3 packing cubes in assorted coloursMade with re-purposed micro baffle fabricMicro baffle fabric is made from lightweight Nylon ripstopWebbing carry handle to one sideSingle zip-around entryDipped zip pullsDurable Water Repellent treatmentDimensions: Small: 20 x 15 x 10cm; Medium: 30 x 20 x 10cm;Large: 39 x 30 x 10cmBuy Föhn outdoor accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kingfoam insoles absorb up to 95% of impact energy. These insoles will put your personal footprint into your shoe and give your arch, foot and whole body great support! Kingfoam Orthotics are used by world class athletes and are recommended for everybody! Compatible with all foot types, also trimmable if your size is out, get one size up and trim with scissors. These are best for mid to high arch feet. Absorbs 91% of impact energy in lab testing compared to 53% in other performance insoles. Our proprietary material in the exact same formulation is used by NASA on the ISS for sensitive electronics protection.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Key Features:Comfort saddle,Weighs 425g approx ,Dimensions: 255 x 175mm .