Look Keo 2 Max Road PedalsWith a thin body for reduced drag and wider size, the Keo 2 Max road bike pedals make your feet more stable and make the most of your power delivery. Made with a tough composite body, a plate of hard-wearing stainless-steel and a chromoly (CrMo) axle, their modern design complements the styling of today’s bikes. By increasing the overall contact area with your cycling shoe, Look has ensured these pedals bring you increased comfort and efficiency.Features: Body Material: Composite body with Stainless-Steel platform Axle Material: Oversized Chromoly (CrMo) Axle Size: Standard 9/16" thread Intended Use: Road (recreational to competition use) Pedal Stack Height: 17.3mm (including cleats) Platform Width: 60mm Contact Surface Area: 500mm² Tension: 8Nm to 12Nm adjustable spring Cleats Included: Yes, supplied with grey Look Keo Grip CleatsFloat: 4.5° grey cleats included (black 0° and red 9° cleats available separately) Distance Pedal Spindle / Crank Arm (Q Factor): 53mm Pair or Single: Pair Weight: Single Pedal: 130g; Pair with Cleats: 328gTechnologies:Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your bestImproved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliabilityBuy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Look Keo 2 Max Road PedalsWith a thin body for reduced drag and wider size, the Keo 2 Max road bike pedals make your feet more stable and make the most of your power delivery. Made with a tough composite body, a plate of hard-wearing stainless-steel and a chromoly (CrMo) axle, their modern design complements the styling of today’s bikes. By increasing the overall contact area with your cycling shoe, Look has ensured these pedals bring you increased comfort and efficiency.Features: Body Material: Composite body with Stainless-Steel platform Axle Material: Oversized Chromoly (CrMo) Axle Size: Standard 9/16" thread Intended Use: Road (recreational to competition use) Pedal Stack Height: 17.3mm (including cleats) Platform Width: 60mm Contact Surface Area: 500mm² Tension: 8Nm to 12Nm adjustable spring Cleats Included: Yes, supplied with grey Look Keo Grip CleatsFloat: 4.5° grey cleats included (black 0° and red 9° cleats available separately) Distance Pedal Spindle / Crank Arm (Q Factor): 53mm Pair or Single: Pair Weight: Single Pedal: 130g; Pair with Cleats: 328gTechnologies:Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your bestImproved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliabilityBuy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Whether you're riding for the joy of it or pushing for the top spot on the podium, you get the best of both worlds with a slim profile and incredible support from the large contact area that translates into superior comfort and maximum power transfer. Technologies: Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.
THE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS. The LOOK design team has completely remodeled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency. Optimized Contact Surface The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedaling. This creates a feeling of unrivaled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. Specifications: Usage: Recreational To Competition Body: Composite Axle: Chromoly + Pedal Stack Height + Cleats: 17,3 Mm Contact Surface Area: 500 Mm² Float: 8 Or 12 Adjustable Spring Cleats: Kéo Grip Cleats Pedal Weight: 130 Gr (328 Gr Per Pair With Cleats And Screws) Colors: Black Or White Accessories: A Pair Of Grey Kéo Grip Cleats + Screws Guaranty: 2 Years, Look Warranty Policy
Key Features:Engineering Plastic Body,Cro-Moly Axles,Sleeved Bearings,329 grams.
What is the difference between a Keo Classic 3 and a Keo Classic 3 Plus The material used for the contact area. The little extra, stainless steel rather than composite, optimises pedal stiffness and hence the transfer of power from you to your bike. As for the rest, we stick to what works: fast clip in / clip out and easy tension adjustment.Large, wide contact area for excellent stability thru the pedal strokeA total weight of 350 grams, all includedAll of LOOK's expertise at an affordable priceSpindleSpindle material: ChromolyBody & PlatformTechnology: SpringBody material: CompositePlatform material: Stainless steelPlatform area: 400 mm²Platform width: 60 mmRetention & CleatsRetention: 8 to 12Cleats: Keo GripWeight & AccessoriesWeight Pedal: 140 grWeight pair + cleats: 350gStack height + cleats: 17.8mm
Discover the fun and the benefits of riding with the Kéo Classic 3 clipless pedal. Simple to use it is impossible to adjustment the cleat entry/release tension too low for an easy clip out. Its large and wide contact surface provides excellent pedalling stability. TECHNOLOGIES CHROMOLY SPINDLE FOR MORE RELIABILITY The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place. A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal and an eccentric rotation (creating a shock on each rotation). LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard the ISO 4210. SPECIFICATIONS USAGE: Beginner to advancedBODY: CompositeAXLE: ChromolyTHREADING: 9/16 X 20 mmBEARINGS: 1 ball bearing 1 needle bearing cartridgePEDAL STACK HEIGHT: 157 mmDISTANCE PEDAL SPINDLE / CRANK ARM: 53 mmCONTACT SURFACE AREA: 400 mm²FLOAT: 8 to 12 adjustable springCLEATS: Kéo Grip CleatsANGULAR MOVEMENT: 0 ° 4.5 ° or 9 ° according to the cleat colour (Black Grey Red)PEDAL WEIGHT:140 gr (348 gr per pair with cleats and screws)COLOURS: BlackACCESSORIES: A pair of Grey Kéo Grip cleats + screwsGUARANTY: 2 years
Powering you on with style and composure, these superb components feature a hard-wearing composite body construction which is topped off with a stainless steel platform. As a result, this Plus version utilises pedal stiffness and enables you to benefit from a superior transfer of power as you remain focused on the finish line. This makes the Look Keo Classic Plus pedals the ultimate choice of upgrade for riders who want a wider contact area and greater pedalling efficiency.
Look Keo Classic Plus Road PedalsWhen you’re putting the power down on your road bike, you need clipless pedals that give you reliable stability and make the most of your pedalling effort. This is why Look has taken the design of its hugely popular Keo Classic road bike pedals and increased their width, bringing you its "Plus" model. The strong composite bodies are combined with stainless-steel plates, giving a wide, stiff and durable contact area. Look also includes its grey cleats with 4.5° of float and each pedal's cleat engagement system has adjustable tension, so you can fine-tune them to suit your preference.Features: Body Material: Composite Platform Material: Stainless Steel Axle Material: Chromoly (CrMo) Axle Diameter: Standard 9/16" thread Pedal Type: Clip-in Cleat Type: Look Keo (3 bolt) Cleats Included: Yes, supplied with grey Look Keo Grip Cleats Float: 4.5° grey cleats included (black 0° and red 9° cleats available separately) Platform Area: 400mm² Platform Width: 60mm Use: Road Adjustment: Tension adjustment (8-12Nm) Total Stack Height: 17.8 mm (11.5 + 6.3mm) Single or Pair: Pair Large, wide contact area for excellent stability thru the pedal stroke All of Look's expertise at an affordable price Part Number: PEKC22256 Weight: 350g (pair, including cleats)Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
LOOK KEO CLASSIC 3 PLUS WITH KEO GRIP CLEAT What is the difference between a KEO CLASSIC 3 and a KEO CLASSIC 3 PLUS? The material used for the contact area. The little extra, stainless steel rather than composite, optimizes pedal stiffness and hence the transfer of power from you to your bike. As for the rest, we stick to what works: fast clip in / clip out and easy tension adjustment. WHY YOU'LL LOVE IT? THAT LITTLE EXTRA WHEN IT COMES TO STIFFNESS Large, wide contact area for excellent stability thru the pedal stroke A total weight of 350 grams, all included All of LOOK's expertise at an affordable price SPINDLE Spindle material: Chromoly BODY & PLATFORM Technology: Spring Body material: Composite Platform material: Stainless steel Platform area: 400 mm² Platform width: 60 mm RETENSION & CLEATS Retention: 8 to 12 Cleats: KEO GRIP WEIGHT & ACCESSORIES Weight Pedal: 140 gr Weight pair + cleats: 350 gr Stack height + cleats: 17,8 mm
The Look Keo Classic 3 is the perfect entry point into road bike clipless pedals. With adjustable entry/release tension, the Keo Classic 3 is easy to use and beginner-friendly. The Keo Classic 3 is also built to last; just like Look s other pedals these are made to go the distance.Adjustable entry/release tension is perfect for beginnersLarge, wide contact surface provides excellent pedalling stability and efficiencyOversized steel axle and needle cartridge bearing for excellent longevityLightweight at just 140g per pedalSold as a pair with grey 4.5-degree release Keo Grip Cleats & ScrewsThe Keo Classic 3 is easy to use, has a large and wide contact surface to provide excellent pedalling stability and had an adjustable entry / release tension for an easy clip out. The spindle is constructed of an oversized steel axle with miniature ball bearings and a needle bearing cartridge for improved wear resistance and exceptional durability.To say that Look extensively test their products would be a serious understatement. Look axles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal with an eccentric rotation, which is equivalent to a Mark Cavendish sprint at 1700 watts with 100 revolutions/min for 333 hours! The Classic 3 Pedals are perfect for those that want great quality, high performance pedals on a budget.
Look Keo Blade2 Kit for swapping the cleat enagement force required for your Keo Blade 2 pedals.The Blade body and blade are built from composite material. This substance makes the production of a range of less rigid blades possible – 12-20Nm - for a cleat engagement and release feel that falls between a metal spring and a carbon blade pedal.Choose from 1216 or 20Nm versions Comes with heel plates and pins.