SRAM Rival 1 Hydraulic Disc BrakeWith the Rival 1 road bike disc brake installed on your bike, you'll be equipped to ride in all conditions and enjoy fine speed modulation on long descents. Ideal for use within a 1x11-speed drivetrain and with road, cyclocross or gravel bikes, this hydraulic disc brake has a redesigned HydroR lever with improved ergonomics. This means you'll be able to easily wrap your fingers around this brake and enjoy effortless braking control.Reasons to Buy: Exceptional control in all-weather conditions. Ideal for road, cyclocross or gravel bikes. Uses a redesigned HydroR lever with improved ergonomics. Effortless braking power.Features: Lever Material: Aluminium Caliper Design: Forged Aluminium Stainless Hardware: Stainless Steel Brake Type: Hydraulic disc brake Mount Type: Post mount or flat mount options Rotor Compatibility: 140 or 160mm 1-piece Centerline (not included) Pad: Steel-backed organic Brake Fluid Type: DOT 5.1 Adjustment: Tooled Reach Adjust Intended Use: Road Sold individually Pivot: BushingManufacturer Reference Codes: 1800mm Post Mount Left Rear: 00.5018.059.001; 850mm Post Mount Left Front: 00.5018.059.000; 950mm Flat Mount Left Front: 00.5018.059.002; 1800mm Flat Mount Left Rear: 00.5018.059.003Technologies Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Force22 Road Disc BrakeThe Force 22 Road Disc Brake combines the outstanding performance of SRAM’s 11-Speed mechanical gearing with the power and reliability of hydraulic disc brakes. The force 22 lever features a revised design to offer increased braking force with less rider effort.Fade-free BrakingAs these levers use high-quality DOT 5.1 brake fluid, you can head into the mountains with even more confidence and you’ll be able to take on those long descents without worrying about your brakes.Advanced ShiftingSome of SRAM's best shifting technologies have been packed into the Force 22 lever, including Reach Adjust, DoubleTap, and ZeroLoss. This means that this lever offers you a personalised setup, minimal user effort and lightning quick shifts.Features:Material: Carbon Fibre (lever) Forged Aluminum (disc caliper and shift lever) Stainless Steel (hardware) Optimised stopping power and modulation for road use 18mm pistons Road specific caliper and piston ratio Fully sealed system = no contamination Finish: Ice grey anodised Mounting: Flat mount no offset Recommended Rotor: Centerline (140 and 160mm, not included) Pad Type: Steel-backed organic Fluid: DOT 5.1 Compatibility: SRAM RED 22, Force 22, and Rival 22 Speed: 11-Speed Shift Inner Cable Length: 2200mm Shift Outer Cable Length: 2050mm Hose Length: 1800mm Weight: 471g per wheel (lever, caliper, hose and 160mm centerline rotor)Technologies: DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that in their brake systems, DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. DoubleTap: DoubleTap makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars. With short, rapid taps you will shift up through the shifting range and downshifting comes via a longer sweep of the lever (in the same inward direction you upshift, but to an ergonomically maximised 15° angle) Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. ZeroLoss: ZeroLoss simply means, well, zero loss—when you push on the lever, for an upshift or down shift, the cable is engaged instantly—zero loss of movement. There is no middle ground where you're waiting for the shift to come. Gear changes are instant and precise Connectamajig™: The Connectamajig is the coupling hose that makes the initial set-up of SRAM road hydraulic brake systems easy, fast and convenient for the factory, craft builder, or dealer. The intimidation of hydraulics is gone with a push and a twist, it's just that easy. Connectamajig is available to bike manufacturers and works for SRAM’s RED 22 and S-700 hydro systemsBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Guide R Disc BrakeFeaturing a tried and tested four-piston caliper for the smoothest single-finger control, the Guide R Disc Brake is packed with state-of-the-art braking technologies to give you top-end performance on every single ride. Constructed from forged aluminium, this durable and lightweight disc brake can be positioned to your preferred distance using the Reach Adjust attachment system, letting you set it at the most comfortable point on your bar for your hand. As a result, you'll enjoy a more rider-tuned feel as you conquer your way from trail to trail.MTB Disc Brake with DirectLink LeverOther technology in the Guide R includes the DirectLink lever design that gives precise control with every squeeze and the PiggyBack brake fluid reservoir which gives excellent brake fluid management. Working perfectly in tandem with other SRAM components and designed for use on cross country (XC), trail, all mountain (AM) and free ride (FR) bikes, the Guide R Disc Brake is an excellent choice of disc brake from SRAM.Reach AdjustBrake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.MatchMaker and MMX CompatibleSave weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker X integrates the RockShox XLoc and is compatible with XX and X0 brakes. Standard Matchmaker is also available and works with any split-clamp design and RockShox PushLoc.PiggyBack ReservoirThe brake fluid reservoir on SRAM's latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle.PURE BladderSRAM's brake lever design includes a reshaped bladder, called Pure, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency.SwingLinkSqueeze a SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That's great, but there's more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It's the perfect balance of power and precision.Features: Lever Blade Material: Stamped Aluminium Use: Mountain Bike (MTB), Cross Country (XC), All Mountain (AM) and Free Ride (FR) Brake Type: Hydraulic disc brake Pad Type: Steel-backed Caliper Type: Four-piston caliper Recommended MMC Clamp (Not Included): Stl(matteblk)bolt,blk clp Rotors Included: No Single or Pair: Single Weight: 392gBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 RS Disc BrakeAll set for hitting your local mountain bike (MTB) trails, this hydraulic disc brake is equipped with a robust aluminium lever body and a forged aluminium caliper, which makes it ready for the most demanding of trail adventures. Another highlight is its tool-less adjustable lever reach that allows you to easily set it up to match your hand size or riding style. This makes it comfortable to pull as you dive into corners and drops at speed, while also keeping your momentum flowing. Coming complete with SRAM's Bleeding Edge technology, this model also allows for simple DOT 4 fluid installation and maintenance when required.Hydraulic Disc Brake with SwingLink TechnologyWe spend a lot of time obsessing over feeling, and SwingLink technology brings SRAM's best research and development to life. The G2 RS offers riders the joys of SwingLink — getting brake pads to the rotor fast, then moderating pressure with smooth modulation. It's one small movement for your finger, one monumental upgrade to your braking.Power Reserve GeometryYour fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it.Bleeding EdgeWith this new caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed.S4 Light-Weight 4-Piston CaliperThe all new S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds.SwingLinkSqueeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That's great, but there's more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It's the perfect balance of power and precision.We spend a lot of time obsessing over feel, and SwingLink technology brings SRAM's best R&D to life. The G2 RS offers riders the joys of SwingLink — getting brake pads to the rotor fast, then moderating pressure with smooth modulation. It's one small movement for your finger, one monumental upgrade to your braking.- Power organic pads give riders both feel and bite.- Bleeding Edge for simple fluid installation and maintenance.- Tools-free reach adjust for quick personalisation.Features: Lever Body Material: Aluminium Lever Blade Material: Aluminium Stamped Lever Blade Material: Aluminium Stamped Piston Material: Phenolic Plastic Caliper Hardware Material: Black Phosphate Steel Caliper Body Material: Forged Aluminium Pad Type: Steel-backed Organic Use: Mountain Bike (MTB) Mount: Post Mount Type: Hydraulic Disc Brake Pistons: 4 pistons Single or Pair: Single Reach Adjust: Tool-free reach adjust Caliper Bleed Port: Bleeding Edge Lever Port: Bushing Hydraulic Fluid: DOT 4 Weight: 490gTechnologies: SWINGLINK: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. Many brake systems minimize deadband - but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It's the perfect balance of power and precision. Reach Adjust: Brake lever fit and feel is a personal thing. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone, regardless of hand size.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS™ drivetrain. It's designed specifically for road riding - and to keep braking quiet at every stop. Streamlined form optimized for road use CenterLine track offers quiet brake operation Two-piece design reduces weight SPECIFICATIONSDiam (Rotor): 140mm 160mmHub interface: Center LockRotor Type: Centerline 2-Piece
Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth quiet braking performance. Designed for road use Paceline brake track offers quiet brake operation SPECIFICATIONSDiam (Rotor): 140mm 160mmHub interface: Center LockColor (RT): BlackRotor Type: Paceline Centerlock