Double Wall alloy sleeved joint 24"rim from Alienation, intended for use on the front. Made with the new G69 alloy material. TCS (Tubeless compatible) with valve plug if this isn't being used. ###section### Product Specs WHEEL SIZE: 24" SEAM: Pinned ERD: TBC HEIGHT: 19.5 WIDTH: 22.9 SPOKE HOLES: 36 WEIGHT: 290g
Adapts disk brake caliper to frames without built in mounts. Simple installation. Replaces disc side hub cone. No bolts or tools required. Only for use with Profile Racing AC-2 BMX Disc Brake Cassette Hub.
Sunday introduces the Discovery Handlebars. boasting 4130 chromoly with post-weld heat-treatment, 1.8/1.3 thick multi-butted main tubing, large radius bends for greater durability and multi-butted traditional 7/8" crossbar for strength ###section### Product Specs Rise: 9.25" Width: 27.5" Up Sweep: 2° Backsweep: 12° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: TBC ###section### ###shogun-image-section###
Disc brake wheelset from stay strong featuring Stay Strong‚Äôs rear hub with disc mounting points and after-market double wall ‚Äòbaseless‚Äô rim for that clean black look. STAY STRONG rim tape included. These are run by the Stay Strong team riders so are super high spec, see below for full details. These wheels cantake a 24‚Äù x 1.5‚Äù - 1.85" tyre ###section### Product Specs WHEEL SIZE:24" HUB:Front: Alloy fully sealed — 36 Hole — Alloy female hollow axle Rear: Alloy fully sealed — 36 Hole — hollow axle — 6 Pawl — 180 points of engagement — Alloy 7075 17T Cog AXLE:10mm DRIVE SIDE:RHD RIM:Front: Alloy double wall 'Brakeless' design- 36 Hole ‚Äî Pinned Joint¬† Rear: Alloy double wall with CNC'd sidewall ‚Äî 36 Hole ‚Äî Pinned Joint SPOKES:3 cross lacing ‚Äî Double butted ‚Äî Stainless steel NIPPLES:Alloy WEIGHT:Front: 970g, Rear: 1105g (with cog)
Disc brake wheelset from stay strong featuring Stay Strong‚Äôs rear hub with disc mounting points and after-market double wall ‚Äòbaseless‚Äô rim for that clean black look. STAY STRONG rim tape included. These are run by the Stay Strong team riders so are super high spec, see below for full details. These wheels cantake a 1.5‚Äù - 1.85" tyre. ###section### Product Specs WHEEL SIZE:20" HUB:Front: Alloy fully sealed — 36 Hole — Alloy female hollow axle - 15267 Bearings Rear: Alloy fully sealed — 36 Hole — hollow axle — 6 Pawl — 180 points of engagement — Alloy 7075 16T Cog - 6902 Bearings. AXLE:10mm DRIVE SIDE:RHD RIM:Front: Alloy double wall 'Brakeless' design- 36 Hole ‚Äî Pinned Joint Rear: Alloy double wall with CNC'd sidewall ‚Äî 36 Hole ‚Äî Pinned Joint SPOKES:Front: 187mm ‚Äî 3 cross lacing ‚Äî Double butted ‚Äî Stainless steel Rear: 182mm and 185mm ‚Äî 3 cross lacing ‚Äî Double butted ‚Äî Stainless steel NIPPLES:Alloy WEIGHT:Front: 823g, Rear: 960g (with cog)
Disc brake wheelset from stay strong featuring Stay Strong‚Äôs rear hub with disc mounting points and after-market double wall ‚Äòbaseless‚Äô rim for that clean black look. STAY STRONG rim tape included. These are run by the Stay Strong team riders so are super high spec, see below for full details. These wheels can take a 1-1/8‚Äù or 1-3/8‚Äù tyre. ###section### Product Specs WHEEL SIZE:20" HUB:Front: Alloy fully sealed — 28 Hole — Alloy female hollow axle - 6901 Bearings Rear: Alloy fully sealed — 28 Hole — hollow axle — 6 Pawl — 180 points of engagement — Alloy 7075 16T Cog - 6901 Bearings. AXLE:10mm DRIVE SIDE:RHD RIM:Front: Alloy Aero 'Brakeless' design - 28 Hole - Pinned Joint Rear: Alloy Aero design with CNC'd sidewall - 28 Hole - Pinned Joint SPOKES:Front: 191mm ‚Äî Radially lace ‚Äî Double butted ‚Äî Stainless steel Rear: 192mm and 195mm ‚Äî 3 cross lacing ‚Äî Double butted ‚Äî Stainless steel NIPPLES:Alloy WEIGHT:Front: 708g, Rear: 827g (with cog)
The Box Disc Brake Adapter is designed to help improve braking control on frames where disc brakes were not standard. Compatible with 2 types of dropouts and 3-10mm hubs, in the right configurations, the Box Disc Brake Adapter goes over your hub’s axle and mates with the frame’s dropout, allowing mounting of a standard post mount disc brake caliper.
The Box Three BMX Disc Brake Caliper is here! With an IS style mounting interface made of carbon steel, this disc brake caliper is all you need to improve control. Weighing only 130 grams, this lightweight gadget will spring you smoothly through every turn. All you need to do is focus on the finish line.
The Box Disc Brake Adapter is designed to help improve braking control on frames where disc brakes were not standard. Compatible with 2 types of dropouts and 3-10mm hubs, in the right configurations, the Box Disc Brake Adapter goes over your hub’s axle and mates with the frame’s dropout, allowing mounting of a standard post mount disc brake caliper.
Disc rotor with a 120mm diameter specifically designed & manufactured by Stay Strong. Optimal heat dissipation to cool as quickly as possible. Industry standard 6 bolt fastening system compatible with the Stay Strong disc hub and other manufactures. Sold with fixing hardware.
Designed for disc integration on the Stay Strong For Life V3 frames, allowing the rider to run a 120mm disc rotor utilising the frames shaved V brake mounts for a clean disc look. Rotor sold separately or within the Stay Strong full disc brake kit.
Replacement slack disc set for the WTP Hybrid Rear hub.