Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink™ lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.Weight: 370g (direct mount, 800mm hose, 160mm CL rotor)Lever Material: Forged aluminumCaliper Design: 2-piston caliperFinish: Gloss BlackRotor: CenterLinePad: Steel-backed organicFluid: DOT 5.1Adjustment: Tooled reach adjustTechnology Highlights: DirectLink™, Expandable Bladder, Timing Port ClosureMaterial: AluminumPad / Holder: Top loadingIntended Use: XC, TrailSystem: Open systemRotor Sizes: 140 (rear), 160, 170, 180, 200mmTri-Align Caliper Positioning System: NoSpeed Dial: NoBend Zone™: YesAmbidextrous: YesStainless Hardware: Steel
Utilising MRP's patented integrated skid, the XCg tucks neatly behind your crankset and protects those costly chainrings from damage. The replaceable nylon skid glides over rocks and obstacles.Key Features:Two sizes, 32t and 36t,Great accessory to protect costly chainrings,Integrated skid protects chainrings and glides over rocks and obstacles,88g (XCg V2 32t, ISCG-05 model).
Dozen 150 Rear Hub12mm through axle DH cassette hub with tough DH race proven performance.Includes sliding 12mm Cr-Mo axle to fit through-axle rigs.SpecificationsDrillings : 36H,Bearings : 6902 cartridge bearings,Spacing : 150mm,Disc Mount : 6 bolt,Ratchet : 3 Double width pawls.,Freehub Body : Cr-Mo HG type,Dimensions : C-L 42mm, C-R 28mm, flange 58mm,Colour : Black anodised or Powder-coated White.,Weight : Hub excluding axle 450g, Axle & nuts 214g.
Chaos Rim - 27.5"The Chaos is part of Halo's new generation of clean welded joint rims.Sam Pilgrim chooses the 26" versions and they helped propel him to becoming the 2013 FMB World Tour Series Champion.They are also great Downhill Race or Enduro rims as well as being equally at home on Trail Centres for those riders looking for strength and performance.This rim, like Sam, will always cause some Chaos.,A lightweight rim with a full blown heavyweight punch.,Light enough to win dirt comps at the highest international levels, but yet tough enough to handle full-on DH or Enduro courses..Recommended Spoke Tension:Front and Rear: 100 to 135Kgs.SpecificationsMaterial Heat treated extruded aluminium,Drillings 32H,Eyelets Stainless Steel,ERD 562mm,Joint type Clean welded,Colour White powder coated or Shot blast and Black anodised,Dimensions 28mm wide, 20mm deep,Weight 524g.
Key Features:FH-M7130 SLX 12-speed freehub,Centre Lock disc mount .
Shimano SLX M7120 MTB Disc Brake CaliperThis four-piston brake caliper is optimised for dominating the trails as it provides versatile high-performance braking control. It features quicker piston retraction which instils greater downhill confidence and modulation as you carve your way around the mountain. Furthermore, its clever design decreases disc brake rotor wobbling noise and increases braking power by 10% in comparison to its predecessor. Features: Material: Aluminium Use: MTB Recommended Brake Lever: BL-M7100 Recommended Brake Rotor: SM-RT70 Piston: 4-piston Oil: Mineral oil Mount: Post Mount Type: Hydraulic disc brake Hose: Banjo Pad: Resin (Organic)Technologies:Four Piston: A disc brake system with the dual diameter opposed-piston caliper design has differently sized pistons in the front and in the rear. The system adopts a power transfer system in which the disc brake rotor is pressed by the smaller sized piston at the entrance of the disc brake rotor intake and also by the more powerful larger sized piston at the back. This prevents the wobbling motion of the disc brake rotor and reduces noises significantly. The 4-piston caliper also allows a wider contact area for the disc brake rotor while keeping the size compact, and the efficient location of pads is adjusted as necessary to stabilise the pressure. In combination use with the Servowave lever it provides an incredible 50% more stopping power than the previous model. The advanced Saint/Zee disc brake system, which adjusts to accommodate the different braking styles of different riders, offers stable braking power and excellent modulation.Ice Technologies: The fade, which can occur to disc brake rotor and pad when braking on a long downhill ride for instance, has a negative impact on the braking performance. Shimano has adopted Ice Technologies disc brake rotors and Ice Technologies pads to realise the cooling technology for consistent performance. The clad disc brake rotor blade, which has a 3 layer-sandwich structure of stainless steel, aluminium and stainless steel, provides better radiation performance achieving from 400˚C to 300˚C surface temperature. Also, the radiation fin has been adopted for the pad. Moreover, the clad disc brake rotor blade and the radiator fin provide long pad life, less noise, less fade and lightweight.Click HERE to check out the Shimano Brake Reference Guides.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano XT M8100 Mountain Bike Disc BrakeThe stunning XT M8100 Mountain Bike Disc Brake from Shimano combination features a two-piston caliper and a rider tunable lever for outstanding stopping power on the trails. Its lever gives you an action-optimised cockpit layout for greater flexibility while its reach adjustment suits any hand size. Its caliper offers quicker piston retraction for superior modulation and control, so you'll benefit from a more efficient braking set-up. This lightweight and easy to install model is ideal for taking your off-road adventures to the next level.Features:Material: Lever: Aluminium anodised; Caliper: Aluminium paintedUse: MTB (mountain bike)Caliper Mount: Post MountLever Length: 2 fingerAdjustment: Tool-less reach adjustmentPiston: 2-pistonPads: G03A Resin without finBrake Fluid: Mineral oilWeight: 284g (approx)Technologies:Servo Wave Action: When you pull a Servowave brake lever, initial pad travel is fast, so little lever movement is needed to bring the pads into contact with the rotor. The power multiplication factor then increases rapidly at the pad-to-rim contact so more of the lever stroke is used to apply greater braking power with improved control.Reach Adjust: Brake lever is equipped with a reach to adjust mechanism. The distance from the handlebar grip to lever can be adjusted to suit any hand size, type of riding and individual rider preferences.Free Stroke: The distance from the initial lever position to pad contact point can be adjusted to suit any hand size, type of riding and individual rider preferences.Ice Technologies: The fade, which can occur to disc brake rotor and pad when braking on a long downhill ride, has a negative impact on the braking performance. Shimano has adopted Ice Technologies disc brake rotor and Ice Technologies pad to realise the cooling technology for consistent performance. The clad disc brake rotor blade, which has a 3 layer-sandwich structure of stainless steel, aluminium and stainless steel, provides better radiation performance achieving from 400˚C to 300˚C surface temperature. Also, the radiation fin has been adopted for the pad. Moreover, the clad disc brake rotor blade and the radiator fin provide long pad life, less noise, less fade and lightweight.One Way Bleeding: One Way Bleeding was developed for quick and easy prevention of air in our hydraulic system. We have streamlined the oil route throughout the system to prevent air bubbles from being captured in the system. One way oil routing plus a funnel tool with mineral oil provides an easy and clean bleeding system.Click HERE to check out the Shimano Brake Reference Guides.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano XT M8100 Mountain Bike Disc BrakeThe stunning XT M8100 Mountain Bike Disc Brake from Shimano combination features a two-piston caliper and a rider tunable lever for outstanding stopping power on the trails. Its lever gives you an action-optimised cockpit layout for greater flexibility while its reach adjustment suits any hand size. Its caliper offers quicker piston retraction for superior modulation and control, so you'll benefit from a more efficient braking set-up. This lightweight and easy to install model is ideal for taking your off-road adventures to the next level.Features:Material: Lever: Aluminium anodised; Caliper: Aluminium paintedUse: MTB (mountain bike)Caliper Mount: Post MountLever Length: 2 fingerAdjustment: Tool-less reach adjustmentPiston: 2-pistonPads: G03A Resin without finBrake Fluid: Mineral oilWeight: 284g (approx)Technologies:Servo Wave Action: When you pull a Servowave brake lever, initial pad travel is fast, so little lever movement is needed to bring the pads into contact with the rotor. The power multiplication factor then increases rapidly at the pad-to-rim contact so more of the lever stroke is used to apply greater braking power with improved control.Reach Adjust: Brake lever is equipped with a reach to adjust mechanism. The distance from the handlebar grip to lever can be adjusted to suit any hand size, type of riding and individual rider preferences.Free Stroke: The distance from the initial lever position to pad contact point can be adjusted to suit any hand size, type of riding and individual rider preferences.Ice Technologies: The fade, which can occur to disc brake rotor and pad when braking on a long downhill ride, has a negative impact on the braking performance. Shimano has adopted Ice Technologies disc brake rotor and Ice Technologies pad to realise the cooling technology for consistent performance. The clad disc brake rotor blade, which has a 3 layer-sandwich structure of stainless steel, aluminium and stainless steel, provides better radiation performance achieving from 400˚C to 300˚C surface temperature. Also, the radiation fin has been adopted for the pad. Moreover, the clad disc brake rotor blade and the radiator fin provide long pad life, less noise, less fade and lightweight.One Way Bleeding: One Way Bleeding was developed for quick and easy prevention of air in our hydraulic system. We have streamlined the oil route throughout the system to prevent air bubbles from being captured in the system. One way oil routing plus a funnel tool with mineral oil provides an easy and clean bleeding system.Click HERE to check out the Shimano Brake Reference Guides.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank 359 Vibrocore Mountain Bike Disc RimOptimised to deliver peak performance on the downhill, this rim features a Vibrocoam foam inner core for increased torsional strength and a dampened transmission of vibrations. The massive 35mm outer width allows you to run wider tyres for increased stability and traction. Plus, the BeadBite anti-burp hooks grip each tyre to the rim for a secure, uniform performance.Features: Rim: Alloy Clincher (Tubeless Ready) Rim Height: 19mm Rim Width: 30.5mm (inner), 35mm (outer) Hole Count: 32 Weight: 580g (27.5"), 620g (29")Technology: Vibrocore: Vibrocore technology is injected into Spank Vibrocore products and dramatically reduces vibrations that can lead to hand and arm numbness, fatigue and arm-pump. This additional technology also increases overall stiffness and fatigue life of the product. Vibrocore is one of the biggest innovations in Rim technology as it increases the radial compliancy, lateral stiffness and torsional strength while also damping vibrations from the trail. OohBah: The unique OohBah profile allows Spank to manufacture thinner-walled, wider-profiled, lighter rims without sacrificing strength or rigidity. Wider rims mean stiffer wheels and more tire spread, leading to greater traction and improved comfort, and tire performance. The "wave" shape of the OohBah inner tube adds strength and support to the vertical rim flange walls and prevent buckling. Normal straight or curved tube wells must be much thicker, and by default heavier, to offer the same support. BeadBite: At an incredible range of pressures, BeadBite is the solution to keeping your tires burp free and fixed in place. BeadBite rim technology enhances tubeless use with tires of all types and with a greater range of air pressures. BeadBite rims have 6 rows of tiny ridges that run along the vertical and horizontal faces of the bead seats. These tiny teeth create air seals between the rim and tire as the bead conforms into them under air pressure. They dramatically increase frictional forces on the tire bead, reducing the beads' ability to move vertically or horizontally (thus improving tire stability and reducing burps). The bead literally becomes trapped between the vertical and horizontal ridges, even at very low air pressures. Even in tubed applications, BeadBite rims tend to allow much lower air pressures with reduced risk of pinch flats.Buy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank 359 Vibrocore Mountain Bike Disc RimOptimised to deliver peak performance on the downhill, this rim features a Vibrocoam foam inner core for increased torsional strength and a dampened transmission of vibrations. The massive 35mm outer width allows you to run wider tyres for increased stability and traction. Plus, the BeadBite anti-burp hooks grip each tyre to the rim for a secure, uniform performance.Features: Rim: Alloy Clincher (Tubeless Ready) Rim Height: 19mm Rim Width: 30.5mm (inner), 35mm (outer) Hole Count: 32 Weight: 580g (27.5"), 620g (29")Technology: Vibrocore: Vibrocore technology is injected into Spank Vibrocore products and dramatically reduces vibrations that can lead to hand and arm numbness, fatigue and arm-pump. This additional technology also increases overall stiffness and fatigue life of the product. Vibrocore is one of the biggest innovations in Rim technology as it increases the radial compliancy, lateral stiffness and torsional strength while also damping vibrations from the trail. OohBah: The unique OohBah profile allows Spank to manufacture thinner-walled, wider-profiled, lighter rims without sacrificing strength or rigidity. Wider rims mean stiffer wheels and more tire spread, leading to greater traction and improved comfort, and tire performance. The "wave" shape of the OohBah inner tube adds strength and support to the vertical rim flange walls and prevent buckling. Normal straight or curved tube wells must be much thicker, and by default heavier, to offer the same support. BeadBite: At an incredible range of pressures, BeadBite is the solution to keeping your tires burp free and fixed in place. BeadBite rim technology enhances tubeless use with tires of all types and with a greater range of air pressures. BeadBite rims have 6 rows of tiny ridges that run along the vertical and horizontal faces of the bead seats. These tiny teeth create air seals between the rim and tire as the bead conforms into them under air pressure. They dramatically increase frictional forces on the tire bead, reducing the beads' ability to move vertically or horizontally (thus improving tire stability and reducing burps). The bead literally becomes trapped between the vertical and horizontal ridges, even at very low air pressures. Even in tubed applications, BeadBite rims tend to allow much lower air pressures with reduced risk of pinch flats.Buy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Level TLM Disc BrakeIt has a championship-winning pedigree, and is ready to take all of the punishment you want to give it. Level TLM puts proven SRAM braking performance and consistency at your fingertips, in a sleek, lightweight design optimised specifically for cross-country and light trail use.Power and modulation are delivered via the Level TLM's alloy lever blade, DirectLink actuation, DOT 5.1 fluid and SRAM's new two-piston, monoblock caliper. The design provides superior heat management for consistent, fade-free performance all day long, and Bleeding Edge technology makes maintenance incredibly simple, so your brakes feel great all day, every day.Please Note: A handlebar clamp is not included with this item.Please Also Note: These levers are can be used as a left hand or a right hand brake as they have an ambidextrous design and a bleed port on both sides.Features: Lever Material: Forged aluminium Caliper Design: Monoblock 2-piston caliper Caliper Style: Post Mount Finish: Dark Grey Pad: Steel-backed organic Fluid: DOT 5.1 Adjustment: Tooled reach adjust Material: Aluminium Pad/Holder: Top loading Intended Use: XC, Trail System: Open system Bend Zone: Yes Ambidextrous: Yes Hardware: Stainless Steel Please Note: A handlebar clamp is not included with this item Weight: 356gTechnologies: Bleeding Edge: New bleed porting and fluid path make it easier to push fluid through the caliper for quick and easy bleeding, dedicated bleed adapter for the S4 caliper plugs into the bleed port and seals the system to minimise air contamination and fluid loss. Direct Link: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that in their systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. Expandable Bladder: SRAM's new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved backpressure relief, which produces dependable braking power and consistency. Heat Shield: The stainless steel heat shields break the thermal connection between the pad and caliper body, reducing caliper fluid temperature by about 20C even in the most extreme testing conditions. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over. PiggyBack Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurises the system. SRAM's new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Adapts disk brake caliper to frames without built in mounts. Simple installation. Replaces disc side hub cone. No bolts or tools required. Only for use with Profile Racing AC-2 BMX Disc Brake Cassette Hub.