Tried and tested by their in-house riders, the Lifeline Tubeless Rim Tape provides an effective seal for tubeless rim set ups. The tape comes in 5 widths- 22mm, 25mm, 27mm, 29mm, 32mm and so pick the width to suite your rim.We spent a lot of time trying to find a reliable, strong tubeless tape that doesn't break the bank and after considerable testing we have the product. Used for OEM set ups on Nukeproof and Prime Wheels, the Lifeline Tubeless Tape provides an effective airtight seal. It is recommended that you use the tape that is 2-3mm wider than your inner rim width.Available in rim widths 22mm, 25mm, 27mm, 29mm, 32mmEach tape comes in a 10M length
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can be engaged/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can be engaged/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
The Brand-X Front Boost Conversion Kit allows for a 15x100mm hub to be converted to 15x110mm Boost spacing. This conversion kit includes two axle spacers, a 6-bolt rotor spacer and rotor bolts for straightforward installation. Designed to work with most 15mm non-Boost hubs, it is also recommended to check with your specific hub manufacturer for full compatibility. This kit is specifically developed to allow a 15x100mm hub to be converted to 15x110mm Boost spacing. Genuine Brand-X spare parts.Compatibility: Most 15mm non-Boost hubsIncludes: 2 x Axle spacers, 6-bolt rotor spacer and rotor boltsConversion: 15x100mm to 15x110mm
The Brand-X Rear Boost Conversion Kit allows for a 142x12mm hub to be converted to 148x12mm Boost spacing. This conversion kit includes two axle spacers, a 6-bolt rotor spacer and rotor bolts for straightforward installation. Designed to work with most 142mm non-Boost hubs, it is also recommended to check with your specific hub manufacturer for full compatibility. This kit is specifically developed to allow a 142x12mm hub to be converted to 148x12mm Boost spacing. Genuine Brand-X spare parts.Compatibility: Most 142mm non-Boost hubsIncludes: 2 x Axle spacers, 6-bolt rotor spacer and rotor boltsConversion: 142x12mm to 148x12mm
Redshift's patent-pending Dual-Position Seatpost lets you ride in a true aero position on a standard road bike, without sacrificing your normal position on the bike. Linkage design lets you switch between road and aero positions seamlessly on-the-fly while ridingChoose the best position for every single climb, flat, or descentSaddle moves forward 50mm, corresponding to approximately 4 degrees of effective seat tube angle changeSimple, durable two-bolt saddle clamp allows infinite saddle tilt adjustment and reliable clampingThanks to a unique Linkage design, can you switch between road and aero positions seamlessly on-the-fly while riding, so you can choose the best position for every single climb, flat, or descent. The key to riding powerfully and comfortably with aerobars is proper saddle position. The forward position of the dual-position seatpost allows you to ride with proper aero bike fit on a standard road bike, letting you ride faster and more comfortably. You can switch between road and aero positions on-the-fly while riding, so you can always choose the best riding position for every part of your ride. The Dual-Position Seatpost uses a simple and durable two-bolt saddle clamp that allows infinite saddle tilt adjustment and reliable clamping.
Redshift's patent-pending Dual-Position Seatpost lets you ride in a true aero position on a standard road bike, without sacrificing your normal position on the bike. Linkage design lets you switch between road and aero positions seamlessly on-the-fly while ridingChoose the best position for every single climb, flat, or descentSaddle moves forward 50mm, corresponding to approximately 4 degrees of effective seat tube angle changeSimple, durable two-bolt saddle clamp allows infinite saddle tilt adjustment and reliable clampingThanks to a unique Linkage design, can you switch between road and aero positions seamlessly on-the-fly while riding, so you can choose the best position for every single climb, flat, or descent. The key to riding powerfully and comfortably with aerobars is proper saddle position. The forward position of the dual-position seatpost allows you to ride with proper aero bike fit on a standard road bike, letting you ride faster and more comfortably. You can switch between road and aero positions on-the-fly while riding, so you can always choose the best riding position for every part of your ride. The Dual-Position Seatpost uses a simple and durable two-bolt saddle clamp that allows infinite saddle tilt adjustment and reliable clamping.
Redshift's patent-pending ShockStop Suspension Seatpost provides 35mm of tunable, ultra-responsive suspension travel for the ultimate bump-eating comfort. 35mm of active suspension travel improve comfortSwappable springs included for different rider weightsOptimised linkage geometry provides ultra-responsive suspension27.2mm x 350mm lengthThe ShockStop's 20mm of front suspension and 35 mm of rear suspension let you float over rough terrain, allowing to ride further, faster, and more comfortably on the bike you already own. The minimal, subtle design blends seamlessly with the aesthetic of modern gravel, road, and e-bikes. The swappable springs allow the spring rate to be tuned for different rider weights, while the 27.2mm size will fit most bikes.
The Dynaplug Air Tubeless MTB Repair & Inflation Kit is an all in one tyre repair and reinflation solution and means that there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tubeA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, its also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there s an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Dynaplug Air Tubeless MTB Repair & Inflation Kit is an all in one tyre repair and reinflation solution and means that there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tubeA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, its also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there s an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Dynaplug Air Tubeless MTB Repair & Inflation Kit is an all in one tyre repair and reinflation solution and means that there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tubeA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, its also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there s an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Park Tool HXS1 are shop quality L-shaped hex wrenches which have a genuine Bondhus balldriver tip on the long arm (excluding 8 and 10mm) for hard to reach bolt heads and a straight tip on the short arm for high torque applications. The wrench tips are precision chamfered for a clean, tight fit. Special speed bearing attachment facilitates installation and removal of long-threaded bolts. Wrenches are made from industrial quality Bondhus Protanium high torque steel through hardened for long life. Set includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm sizes. The same shop quality L-shaped hex wrenches as the HXS2, but without the bench mount/wall mount holder.