Wolf Tooth Limited Edition Remote Dropper LeverUtilising sealed cartridge bearings for a silky-smooth action and a low profile, this textured lever is machined to the highest quality. Compatible with all cable-actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Features: Use: MTB Dropper Post Compatibility: All cable-actuated dropper posts (see compatibility for more info) Clamp Diameter: 22.2mmTechnologies: Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Compatibility: Compatible with all cable actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Manufacturer's Part Numbers: WTREMOTECLMPBLU Blue Blue One Size 22.2mm WTREMOTECLMPPRP Purple Purple One Size 22.2mm WTREMOTECLMPRED Red Red One Size 22.2mm WTREMOTECLMPNI Silver Nickel One Size 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Magura Light Action Remote Dropper LeverThis Light Action dropper seatpost lever is engineered to solve common dropper remote problems with its ergonomic, compact and sturdy design. This Light Action version aims to solve common dropper remote complaints with its compact, ergonomic and sturdy design. The ReMote Light Action Dropper Lever has a longer lever arm than the standard ReMote, reducing the actuation force required by a third and making it ideal for dropper posts with a harder pull or if you prefer a light actuation feel. This dropper seatpost lever is another option in Wolf Tooth's industry-leading ReMote line of dropper remotes. Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.Sealed Cartridge BearingIn an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with a captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Lightweight with Hassle-free InstallationWolf Tooth's team has also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice for those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to the engineered failure point, the lightweight ReMote leads in every category.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Clamp Type: Magura Clamp Included: Yes Ergonomic Easy to Install Sealed cartridge bearings Textured lever Made in USATechnologies: UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Number: WTREMOTELAMAGURABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Magura MTB Remote Clamp Conversion KitBy attaching your dropper remote to your Magura brakes, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. This model is specifically designed for use with Magura brakes.Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Magura Brake conversion kit is for Magura brakes but is compatible with some 2-bolt SRAM brakes as well. Features: Material: Delrin and Aluminium Compatibility: Magura brakes Part Number: WTMAGCONVKITBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Manufactured by enduro and built to the highest specifications for lasting quality, even through repeated exposure to foul weather..
Wolf Tooth Headset Spacers for Trek Knock Block are machined in the USA out of aircraft-grade aluminium. Available in a variety of colours to match the style of your bike.These spacers are to be used only with Trek Knock Block system. They are not compatible with other bikes.Trek developed Knock Block as an integrated frame protection system to prevent self-inflicted scuffs, dents, or cracks from spinning handlebars. Knock Block consists of a special stem and a stop chip on the frame. The stop chip limits the turning range of the custom keyed headset cover. The top of the headset cover has notches that lock into corresponding notches on the headset spacers, which also correspond with notches in the stem for a strong connection to the steer tube. These parts work together to prevent the crown of the fork and handlebar controls from hitting the frame when bars are turned too far in either direction. Key Features:Compatible only with Trek Knock Block,These spacers have unique raised features that key to Knock Block compatible stems (made by Bontrager),1 1/8" top (straight 1 1/8" or 1 1/8" to 1 1/2" taper) steerer tubes only.
Because details matter when tricking out your bike, don't stack spacers. Buy the right size instead! Introducing the mate to our beautiful stem caps, the Wolf Tooth headset spacers are precision machined right here in Minneapolis. They come in your favourite anodized colour options and in the lengths of 3mm, 5mm, 10mm, 15mm, 20mm, 25mm, and 30mm so you don't have to stack spacers anymore. Length is laser marked on the end so you don't have to guess. Available in a rainbow of colours these are the perfect way to customize your ride.Key Features:Compatibility: 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only,Weight: 3mm - 2g , 5mm - 3g, 10mm - 5g, 15mm - 7g, 20mm - 9g, 25mm - 11g, 30mm - 13g,Kit Sizes: 3/5/10/15mm,Material: 6061-T6 Aluminium,Handcrafted By Wolf Tooth In Minneapolis, USA.
The Wolf Tooth Precision Headset Spacers Are Handcrafted In The USA From Premium-grade Anodised Aluminium. If You're Looking To Add Some Extra Vibrancy To Your Ride, Look No Further. This 5 Pack Comprises Of 5 Identical Spacers Of The Colour And Size Of Your Choice.Including Nifty Measurement Details On The Top Edges For Ease Of Set Up And Perfectly Paired With Wolf Tooth Precision Headsets, These Are A Must-have.Key Features:Handcrafted By Wolf Tooth In Minneapolis, USA,1 1/8" Top (Straight 1 1/8" Or 1 1/2" To 1 1/8" Taper) Steerer Tubes Only,6061-t6 Aluminium,Options: 3mm, 5mm, 10mm, 15mm, 20mm, 25mm, 30mm,5 X Identical Spacers Of Size And Colour Of Your Choice,Weight: 3mm - 2g , 5mm - 3g, 10mm - 5g, 15mm - 7g, 20mm - 9g, 25mm - 11g, 30mm - 13g.
Wolf Tooth - Precision Is Integrated Standard HeadsetAny Frame That Uses Is (Integrated Standard) Headsets With 41mm Upper And 52mm Lower Outer Bearing Diameter,Uppers And Lowers Sold Separately,Enduro Stainless Steel Sealed Bearings Included On Both The Upper And Lower,.Upper Assembly Features:Ultralight Stem Cap With Integrated Spacer Plus An Aluminium Bolt And A Star Nut,7, 15 And 25mm Stack Height Top Cover Options (7mm Cover = 8mm Total Stack, 15mm Cover = 15mm Total Stack, 25mm Cover = 25mm Total Stack,O-ring Seal Prevents Water Intrusion Around The Steerer Tube,Custom Moulded Upper Lip Seal Provides Additional Protection For The Upper Bearing,.Lower Assembly Features:Custom Moulded Dual Lip Seal On The Crown Race To Protect The Lower Bearing In The Toughest Conditions.
The Wolf Tooth Remote Clamp Conversion Kit allows you to attach a Wolf Tooth Dropper Lever to a specific handlebar diameter or brake lever.By attaching the dropper level to a brake calliper this gives the advantage of minimising components on the handlebars, creating a more compact set up. This also means the the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly.Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Hope brakes, Magura brakes, Shimano IS-AB, Shimano IS-EV, Shimano IS-II, and SRAM Matchmaker X.The Magura Brake conversion kit is for Magura brakes but is compatible with some 2-bolt SRAM brakes as well. The Hope conversion kit is also compatible with Tech3 Hope brakes. Key Features: Conversion kit to fit Wolf Tooth Remote Action Dropper Lever or Remote Light ,Action Dropper Lever to different brake levers and handlebar diameters,22.2mm clamp for flat mtb bars and 31.8mm for drop road bars,Conversion kit for: Hope brakes, Magura brakes, Shimano IS-AB, Shimano IS-EV, Shimano IS-II, SRAM Matchmaker X,Delrin and aluminium parts.
These limited edition Wolf Tooth ReMote Dropper Levers in anodised colours are ergonomic, lightweight and easy to install. Utilising sealed cartridge bearings for a silky-smooth action and a low profile, textured lever machined to the highest quality, this is the ultimate dropper upgrade.Compatible with all cable actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Installation InstructionsCompatibility:Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. ,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best..Mounting Types:ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
The ReMote Light Action Dropper Lever has a longer lever arm than the standard ReMote, reducing the actuation force required by a third and making it ideal for dropper posts with a harder pull or if you prefer a light actuation feel.Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Installation Instructions Compatibility: Compatible with all cable actuated dropper posts., Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.,. Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware.,ReMote IS-II for Shimano I-Spec II - Includes IS-II hardware.,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem.,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - Includes Hope hardware (see compatibility above),ReMote IS-EV for Shimano I-Spec EV - Includes IS-EV hardware.
Wolf Tooth Remote Light Action Dropper LeverMade from tough 6061 T6 Aluminium, this universal dropper seatpost remote from Wolf Tooth is ready for the toughest trails and requires much less effort to operate than most remotes on the market. An ideal upgrade from your dropper’s factory-fitted model, it has a longer arm and a light actuation. Suitable for use on all cable-operated droppers, it gives you the extra leverage and fine control to quickly drop your saddle for a descent or position it perfectly for a tough climb.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Handlebar Clamp Compatibility: Standard 22.2mm Clamp Compatibility: SRAM Matchmaker X Mechanical or Hydraulic: Mechanical (cable operated) Weight: 38.5g (approx)Technologies: UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing Low-Profile, Light Action lever: The ReMote LA lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals Integrated Cable Adjustment: The ReMote LA's solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here High-traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.