The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
Long on travel, short on excuses, ZEB Ultimate is a whole new breed of fork, designed to challenge the limits and take on the world’s toughest enduro tracks. Going Ultimate has its advantages and features a stiff 38mm chassis designed with the new Charger 3™ RC2 with vibration-killing ButterCup™ technology. Our highest performing, athlete-proven technologies matched with premium style plays. This is ZEB. Features: 38mm chassis for increased stiffness and rider confidence NEW ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. NEW Charger 3™ features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any cross talk . Featuring High Speed Compression, Low Speed Compression, and a revamped Low Speed Rebound, every click is meaningful and exact. This dead silent design allows the rider to truly tune to perfection with every click NEW DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. NEW Ultimate Bushing Package maximizes the fork’s bushing overlap, reducing friction and creating the smoothest ride possible NEW Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. With the press of a button or two, Pressure Relief Valves restore premium fork feel. NEW Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride NEW Bolt-in torque cap adapters now included for the use with standard hub end caps Lightweight machined and anodized crown for premium looks and durability Signature Series graphics package RockShox premium short fender compatibility (RockShox bolt-on fender sold separately) Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel Maxima Plush damping fluid reduces friction and silences damper noise
These MTB forks feature a Charger Race Day damper and a DebonAir air spring, which gives you brilliant comfort and control on the toughest of rides. RockShox has also equipped these with a stunning 32mm straight wall aluminium upper tubing and magnesium lower legs. This makes them an excellent choice of upgrade for superior durability and performance on the most aggressive XC adventures. 32mm chassis focused on light weight for the classic XC bike. Charger Race Day Damper - RockShox's lightest production damper with rock-solid lockout. DebonAir™ air spring is tuned specific to meet the demands of XC and maintains a higher ride height for increased confidence and control. Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. Maxima Plush damping fluid reduces friction and silences damper noise. Machined/anodised crown. 29" wheel only. 100mm max travel. Ultimate foil graphics package.
Vision TC 30 is the newest range of light and versatile carbon racing wheels, with a 30mm rim depth in disc brake format. They have been developed using extensive wind tunnel testing and on the road with professional cyclists of our sponsored teams, offering a great balance of performance and light weight at a competitive price.Full Carbon 30mm depth rim,Tubeless ready - clincher,Centerlock rotor mount,6 sealed cartridge bearings (2F + 4R),J-Bend spokes 24F / 24R,TA-12 and X-12,Artisan built, entirely by hand,Includes rim tape (clincher), spoke protector.FREEHUBAlloy freehub,Shimano 10-11sp,SRAM XDR.ADAPTERSFront - QR and TA-15 (available separately),Rear - QR (available separately).
Fly took Sergio Layos and Josh Dove as inspiration to build a bike that even they could ride straight out of the box. The Orion comes equipped with the full range of Ruben Alcantara signature parts, including the new Ruben 2 Grips ###section### Product Specs FRAME MATERIAL: FULL 4130 CRMO WHEEL SIZE: 20" TOP TUBE LENGTH: 21" CHAIN STAY LENGTH: 13.7" HEADTUBE ANGLE: 74.5° SEAT TUBE ANGLE: 71° FORKS: INTEGRATED CONE SHAPE DESIGN / FULL 4130 CRMO / 1 PIECE STEER TUBE BARS: FULL 4130 CRMO STEM: FLY VOLCANO 25MM RISE / 50MM REACH / CNC MACHINED / 6061-T6 ALUMINUM HEADSET: TREBOL / SEALED BEARING / CNC MACHINED / 6061-T6 ALUMINUM BRAKE MOUNTS: Removable BRAKES: TREBOL SPRINGHANGER / FORGED / 6061 T-6 ALUMINUM FRONT HUB: TREBOL BUENO / SEALED BEARING / 3/8” FEMALE AXLE / 36H FRONT RIM: FLY PIRAMIDE / DOUBLE WALL / 6061-T6 ALUMINUM REAR HUB: TREBOL BUENO / SEALED BEARING / 14MM FEMALE AXLE / 36H / 9T REAR RIM: FLY PIRAMIDE / DOUBLE WALL / 6061-T6 ALUMINUM TYRES: FLY RUBEN LIGERA 2.40 FRONT / FLY RUBEN 2.25 REAR / 60 TPI / 120 PSI SPROCKET: FLY TRACTOR TT / CNC MACHINED / 7075-T6 ALUMINUM / 29T CRANKS: TREBOL 3PC / 4130 CRMO / 175 MM ARM LENGTH BB: MID / SEALED BEARING PEDALS: FLY RUBEN GRAPHITE / NYLON - FIBERGLASS COMPOUND SEAT: FLY SIERRA 3 SEAT / 100% SYNTHETIC LEATHER / 7 MM THICKNESS GEARING: 29/9 WEIGHT: 11.4 KG. / 25.1 LB. ###section### Product Highlights Longer top tube is great for taller riders who need a bit more room (6ft / 180cm plus) Designed with more stable feeling geometry to suit trails and park riding Sealed bearings throughout Strong and durable double walled rims Chain Tensioners To Help Keep Your Wheel In Place ###shogun-image-section###
The Metron 4D Flat combines the superb ergonomics and aerodynamics of the Meron 4D, with a lower hand position and an innovative optional Modular Aero System (MAS) direct-mount clip-on system for additional versatility.Key Features:31.8mm × 400 + 10mm, 420 + 10mm & 440 + 10mm (c-c),125mm drop, 80mm reach,2° outward bend,UD carbon finish,Colour graphics: grey,Weight: 733g (420cm).