With a 130mm fork combined with 125mm of rear suspension, the Reactor ST combines the best of an enduro bike (long, low and slack) with the best of an XC Race bike (lightweight spec and efficient suspension) to create a sprightly yet seriously capable machine. Frame Construction: To optimise the weight, strength and stiffness, the Reactor 290 ST Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). Adjustable Geometry: The Reactor ST features a 66.8° (66.3° Low) Headangle atop a 76.3° (75.8° Low) seat angle across a 460mm reach on a Medium frame. We also offer the frame in Large and X-Large sizes. The Reactor ST frames feature the same “flip chip” design as the regular Reactor frame to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor ST into a more aggressive machine, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, we designed the four-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor ST some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor ST is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 290 Carbon, 125mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection • Fork: Fox 34 Float, Factory Series, Kashima, Grip 2 Damper, 130mm, 44mm Offset, BOOST, Black • Shock: Fox Float DPS, Factory Series, Kashima, 3 Position, EVOL LV, Custom LCL, LRL, CMF tune, 210x47.5mm, Bearing End 1x 0.2 Spacer fitted. • Front Wheel: Reynolds TR309 XC Front 28h, 29", Center-Lock, 110x15mm • Rear Wheel: Reynolds TR289 XC Rear 28h, 29", Center-Lock, Shimano Microspline Driver, 148x12mm • Tyres: Front: Maxxis Minion DHF 29”x2.3 3C MaxxTerra/EXO/TR, Rear: Maxxis Agressor 29”x2.3 MaxxTerra/EXO/TR • Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 30T, 52mm Chainline • Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV • Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus • Chain: Shimano XT M8100 HG 12-speed Inc Quicklink • Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T • Brakes: Shimano XT M8100, 2 Pot Brake, Metallic Pads • Front Rotor: Shimano RT-MT800, 180mm • Rear Rotor: Shimano RT-MT800, 180mm • Handlebars: Nukeproof Horizon Carbon V2 25mm Rise, Width - M780mm, L800mm, XL800mm • Stem: Nukeproof Horizon, 45mm, Black • Saddle: Nukeproof, Black • Seatpost: Bikeyoke Divine Stealth w Shimano SL-MT500-IL Remote lever, M:160mm drop; L/XL:185mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: TBD Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 130mm Axle to Crown: 537mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x47.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The Wolf Tooth ReMote Clamp Conversion Kit allows you to attach a Wolf Tooth ReMote Dropper Lever to a specific handlebar diameter or brake lever. This option is specifically designed for use with SRAM Matchmaker X. Genuine Wolf Tooth spare parts. Manufacturer's Part Number: WTMMCONVKIT Black One Size
This Premium DOT Edition bleed kit includes absolutely everything for bleeding SRAM hydraulic brakes with Bleeding Edge bleed port. Compatibility This kit is compatible only with the latest SRAM 2017+ hydraulic brakes with Bleeding Edge bleed port. Not compatible with the older type of SRAM hydraulic brakes with an M5 bleed port. Manufacturer's Part Number: BK-80042 Multi One Size SRAM Edge 2017+ Option 1 250ml
This Workshop edition bleed kit includes a TPX syringe for easier handling besides everything for bleeding absolutely all types of Shimano hydraulic brakes. Oil not included. Included: Lever end 30 ml transparent funnel (syringe body) with brass M5 thread Threaded stainless steel plug (oil stopper) with hanger Caliper end 20 ml TPX syringe with a long-lasting tube Stainless steel tube insert providing a guided fitment between the tube and the bleed nipple Clamp for easier gravity bleed Base for funnel and adapters with spare O-ring studs at the bottom Bleed block for Shimano flat bar hydaulic brakes (2 or 4 piston type) Bleed block for Shimano drop bar hydraulic brakes Rubberized one side hook and loop strap, 25 cm (for securing the caliper syringe to frame or fork) 7 mm wrench Brass adapter for Shimano drop bar hydraulic brakes (Dura-Ace, Ultegra, 105, GRX, Tiagra) Spare O-rings (4 pcs) Compatibility This kit is compatible with absolutely all Shimano hydraulic brakes (XTR, XT, Saint, Zee, SLX, Deore, Alivio, Acera, Alfine, Metrea) including Shimano drop bar hydraulic brakes (Dura-Ace, Ultegra, 105, Tiagra, GRX). Manufacturer's Part Number: BK-28077 Multi One Size All Shimano 2012+
This Premium MT edition bleed kit includes absolutely everything for bleeding Magura hydraulic brakes. Compatibility This kit is compatible with absolutely all MT Magura hydraulic brakes (MT8 SL, MT8 Pro, MT7 Pro, MT5, MT4, MT4 FM, MT Trail...). Technologies: Gold Hydraulic Oil: Bleed Kit's own brand of ultra high-performance oil for brake systems designed for use with mineral oil. Manufacturer's Part Number: BK-31030 Gold One Size Magura MT Option 1 100ml
Adding to the life of rubber seals, as well as protecting against moisture and dirt build-up, this Suspension Lube Spray will instantly improve suspension performance. Suitable for forks, shock units and dropper posts. May even be used to stop dirt from sticking in heavy soiled areas on race day.
It is a side-specific tool and makes fitting press fit bottom brackets including the PF41 a breeze.
This genuine Fox Suspension volume spacer is perfect for making adjustments to your fork's air volume and making your suspension more progressive.
When you need the best all-around road tyre, there’s only one choice: the Hutchinson Fusion 5 Performance. Hutchinson measures its tyres on ride comfort, rolling resistance, grip, wear life, toughness, and weight, and the Performance is off the charts in every category. You get the same fast, grippy Eleven Storm compound as all Fusion 5 series tyres, paired with a more robust Kevlar Pro Tech flat protection layer. With unparalleled, uncompromising ride in our broadest size range, it’s a tyre for every road. The Hutchinson Fusion 5 Performance 11storm is a lightweight, performance-focused road racing tyre that's been designed to excel at competitive racing. It features Hutchinson's ElevenSTORM compound, which lowers rolling resistance across the board for a remarkable uphill speed advantage as well as a grippy all-around performance. The Performance version of the Fusion 5 family is the perfect harmony for all cyclists wishing to go fast and far. Associated with a Kevlar® reinforcement under the tread, it will reassure the most nervous and offer durability superior to 4,000 km. It offers the perfect compromise between performance and comfort, grip and durability.
Weighing just 426g this is one of the lightest and smallest headlamps of this calibre on the market. Power Modes Instead of the switching between different kinds of light modes the R4+ lets you easily set the level of battery you’d like to use with 6 different power options. The light comes with an illuminated power switch making choosing between the right modes even easier. Mounting The light comes with easy to install mounts including a quick bayonet fitting handlebar mount plus a helmet mount and a head harness.
Neatly organised in our world-famous Blue Box Tool Case and built for portability this EK-3 Professional Travel and Event Kit is packed with 56 of our finest tools, allowing hundreds of repair and maintenance tasks to be carried out. Kit Includes ATD-1.2 Adjustable Torque Driver AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups BBT-32 Bottom Bracket Tool for 20 Notch Shimano® and ISIS® Drive BO-2 Bottle Opener CC-4 Chain Checker CN-10 Professional Cable and Housing Cutter CNW-2 Chainring Nut Wrench CP-1.2 Cassette Pliers CT-3.3 Chain Tool CWP-7 Compact Universal Crank Puller DCW-1 Double-Ended Cone Wrench: 13/14mm (2) DCW-2 Double-Ended Cone Wrench: 15/16mm (2) DCW-3 Double-Ended Cone Wrench: 17/18mm DSD-2 Derailleur Screwdriver: Cross Tip DSD-4 Derailleur Screwdriver: Flat Blade DT-2 Rotor Truing Fork FR-5.2H Cassette Lockring Tool with Handle GSC-1 GearClean™ Brush HCW-15 36mm/32mm Headset Wrench HMR-8 8oz Shop Hammer HT-8 8mm Hex Tool HXS-1.2 Hex Wrench Set LP-7 Utility Pliers MLP-1.2 Master Link Pliers MW-8 Metric Wrench: 8mm MW-9 Metric Wrench: 9mm MW-10 Metric Wrench: 10mm PAW-12 12" Adjustable Wrench PW-4 Professional Pedal Wrench RR-12 Tape Measure SW-0 Precision Spoke Wrench: .127" SW-2 Precision Spoke Wrench: .136" SZR-1 Shop Scissors TL-6.2 Steel Core Tire Levers TWS-1 Torx® Compatible Wrench Set UP-SET Utility Pick Set VC-1 Valve Core Tool ZP-5 Flush Cut Pliers
This race-proven model delivers superior performance in all suspension systems and its high viscosity index provides consistent damping through the longest and most extreme riding conditions. Its semi-synthetic mineral oil formulation has become the choice of professionals worldwide as it will not thicken or thin due to changes in temperature. Additionally, its low foam technology delivers consistent and predictable damping in all riding conditions.