This enduro fork comes equipped with a Float EVOL air spring and a GRIP2 damper with variable valve control for a wide range of adjustments. Fox Suspension has also kitted out this Factory Series model with a genuine Kashima coating, so you can enjoy its incredibly smooth front end suspension performance as well as its dazzling finish. Item Top Features Continued: Travel: Multiple options available Remote Operated: No Lever Operated Yes Lockout: No
This seal kit contains all the seals you need to service and maintain your Fox 38 Float forks. Genuine Fox Suspension replacement parts.
This genuine Fox Suspension volume spacer is perfect for making adjustments to your fork's air volume and making your suspension more progressive.
Fox Suspension 38 Float NA2 Volume SpacerThis genuine Fox Suspension volume spacer is perfect for making adjustments to your fork's air volume and making your suspension more progressive.Features: Compatibility: Fox 38 Float forks Manufacturer's Part Number: 234-44-189Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 38 Float Performance Elite Grip 2 ForkBuilt for enduro racing, this suspension fork is part of the Performance Elite series and includes the same adjustments, features, dampers, weight, and 7000 series aluminium upper tubes as Factory Series. The difference is this model's upper tubes feature a hard-wearing anodised finish for fantastic protection against corrosion during wet riding conditions. Fox Suspension has also kitted out this version with Boost axle spacing, making it ideal for modern enduro racing as it delivers additional stiffness as you dominate your way from the top of the mountain to the bottom. To top it off, it comes complete with a lightweight Float EVOL air spring and a GRIP2 damper with dual Variable Valve Control (VVC) for a wide range of tuneability. Packing the same revolutionary feature set as the 36 model, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.GRIP2 Damper with Dual Variable Valve Control (VVC)Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tubes Finish: Anodised Use: Enduro Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP2 with dual Variable Valve Control (VVC) Travel: 170mm Rake: 44mm Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 2180gTechnologies: Performance Elite Series: Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions instead of Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever-operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways we've further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not.Manufacturer's Part Numbers: 910-21-030 Black 27.5" QR110 170mm 44mm 910-21-023 Black 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Engineered for handling the intensity of enduro racing, this high-quality suspension fork is part of the distinguished Performance Elite series which includes the same adjustments, features, dampers, weight, and 7000 series aluminium upper tubes as Factory Series. The difference is this model's upper tubes feature a hard-wearing anodised finish, which offers fantastic protection against corrosion during wet riding conditions. Fox Suspension has also kitted out this version with Boost axle spacing, making it ideal for modern enduro racing as it delivers additional stiffness as you dominate your way from the top of the mountain to the bottom. To top it off, it comes complete with a lightweight Float EVOL air spring and a GRIP2 damper with dual Variable Valve Control (VVC) for a wide range of tuneability. Packing the same revolutionary feature set as the 36 model, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time. GRIP2 Damper with Dual Variable Valve Control (VVC) Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Enduro Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Performance Elite Series: Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions instead of Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever-operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. Manufacturer's Part Numbers: 910-21-030 Black 27.5" QR110 170mm 44mm 910-21-023 Black 29" QR110 170mm 44mm
Fox Suspension 38 Float Performance Grip ForkPart of Fox Suspension's Performance Series, this enduro fork features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT GRIP DamperInspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, the Fox Suspension 38 Float Performance Grip Fork sets a new benchmark for confidence, performance, and durability. Features: Upper Tubes Finish: Anodised Use: Enduro Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP (3-position on-the-fly adjustability) Adjustments: Compression damping positions Open, Medium, Firm; Additional micro-adjust between settings Detents; Low-speed rebound Travel: 170mm Rake: 44mm Compatible Rotor Size: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 2180gTechnologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways we've further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not. 58mm crown diameter to match modern frame shape profiles. Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model.Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, this enduro fork sets a new benchmark for confidence, performance, and durability. Part of Fox Suspension's Performance Series, it features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides. Enduro Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. FIT GRIP Damper Inspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. - 58mm crown diameter to match modern frame shape profiles. - Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). - 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model. Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mm
Built around a dual design, this lockout lever can be mounted on both sides of your handlebar for fast and reliable operation. Specifically designed for use with Fox racing forks and rear shocks which feature CTD settings from 2014 onwards.
Fox Suspension DHX Factory 2-Position Adjust ShockBuilt for long days on your local trails with your riding buddies as well as exploring new routes on your own adventures, this high-quality Factory Series mountain bike (MTB) rear shock delivers coil performance for the trail and beyond. It features a hard-wearing chromoly (CrMo) steel shaft coating that has ultra-low friction properties and is highly durable as you tackle demanding terrain conditions on your ride. Packed with many of Fox Suspension's proven technologies, this model is also part of the renowned Factory Series family that's designed to exceed the demands of Factory-level riders.Coil Spring Ready and AdjustmentsReady for wherever your next trail ride leads you, this rear shock is kitted out with a coil spring ready design and a range of adjustment features to help you dial in your ideal settings. Fitted with an independent two-position lever, you'll benefit from being able to easy switch between open and firm modes to suit the terrain conditions. In addition, its low-speed compression and rebound adjustments make it simple to fine-tune its suspension performance to match your riding style for a more rider-tuned feel.Coil performance for the trail and beyond. Answering the call of riders seeking the ultimate in plush suspension, the Fox Suspension DHX Factory 2Pos-Adj Shock brings coil-sprung, magic-carpet, trail smoothing performance in a wide range of configurations to the trails and beyond.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: Independent two-position Open/Firm lever Adjustment Features: Low-speed compression and rebound Coil Spring Preload: Detents on spring collar Spring Included: Not included. Available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - 2 position adjuster. Optimised reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. MCU bottom out bumper. Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access). Spring preload collar with detents and max / min number of clicks and direction arrow. Full diameter spring retainer with wire ring (like DHX2). Spring scuff guard on body (like DHX2).Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension DHX Factory 2-Position Adjust ShockBuilt for long days on your local trails with your riding buddies as well as exploring new routes on your own adventures, this high-quality Factory Series mountain bike (MTB) rear shock delivers coil performance for the trail and beyond. It features a hard-wearing chromoly (CrMo) steel shaft coating that has ultra-low friction properties and is highly durable as you tackle demanding terrain conditions on your ride. Packed with many of Fox Suspension's proven technologies, this model is also part of the renowned Factory Series family that's designed to exceed the demands of Factory-level riders.Coil Spring Ready and AdjustmentsReady for wherever your next trail ride leads you, this rear shock is kitted out with a coil spring ready design and a range of adjustment features to help you dial in your ideal settings. Fitted with an independent two-position lever, you'll benefit from being able to easy switch between open and firm modes to suit the terrain conditions. In addition, its low-speed compression and rebound adjustments make it simple to fine-tune its suspension performance to match your riding style for a more rider-tuned feel.Coil performance for the trail and beyond. Answering the call of riders seeking the ultimate in plush suspension, the Fox Suspension DHX Factory 2Pos-Adj Shock brings coil-sprung, magic-carpet, trail smoothing performance in a wide range of configurations to the trails and beyond.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: Independent two-position Open/Firm lever Adjustment Features: Low-speed compression and rebound Coil Spring Preload: Detents on spring collar Spring Included: Not included. Available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - 2 position adjuster. Optimised reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. MCU bottom out bumper. Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access). Spring preload collar with detents and max / min number of clicks and direction arrow. Full diameter spring retainer with wire ring (like DHX2). Spring scuff guard on body (like DHX2).Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Factory Series mountain bike (MTB) rear shock is built for long days on your local trails with your riding buddies as well as exploring new routes on your own adventures by providing coil performance for the trail and beyond. It features a hard-wearing chromoly (CrMo) steel shaft coating that has ultra-low friction properties and is highly durable as you tackle demanding terrain conditions on your ride. Packed with many of Fox Suspension's proven technologies, this model is also part of the renowned Factory Series family that's designed to exceed the demands of Factory-level riders. Coil Spring and Adjustments Ready for wherever your next trail ride leads you, this rear shock is kitted out with a coil spring ready design and a range of adjustment features to help you dial in your ideal settings. Fitted with an independent two-position lever, you'll benefit from being able to easy switch between open and firm modes to suit the terrain conditions. In addition, its low-speed compression and rebound adjustments make it simple to fine-tune its suspension performance to match your riding style for a more rider-tuned feel. Coil performance for the trail and beyond. Answering the call of riders seeking the ultimate in plush suspension, the Fox Suspension DHX Factory 2Pos-Adj Shock brings coil-sprung, magic-carpet, trail smoothing performance in a wide range of configurations to the trails and beyond. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit – 2 position adjuster. Optimised reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. MCU bottom-out bumper. Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access). Spring preload collar with detents and max / min number of clicks and direction arrow. Full diameter spring retainer with wire ring (like DHX2). Spring scuff guard on body (like DHX2). Manufacturer's Part Numbers: 978-01-029 Black 210x50mm Metric 978-01-031 Black 210x52.5mm Metric 978-01-033 Black 210x55mm Metric 978-01-035 Black 230x57.5mm Metric 978-01-037 Black 230x60mm Metric 978-01-039 Black 230x65mm Metric 978-01-041 Black 185x52.5mm Trunnion 978-01-043 Black 185x55mm Trunnion 978-01-045 Black 205x60mm Trunnion 978-01-047 Black 205x62.5mm Trunnion