Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, this enduro fork sets a new benchmark for confidence, performance, and durability. Part of Fox Suspension's Performance Series, it features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides. Enduro Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. FIT GRIP Damper Inspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. - 58mm crown diameter to match modern frame shape profiles. - Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). - 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model. Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mm
Engineered for handling the intensity of enduro racing, this high-quality suspension fork is part of the distinguished Performance Elite series which includes the same adjustments, features, dampers, weight, and 7000 series aluminium upper tubes as Factory Series. The difference is this model's upper tubes feature a hard-wearing anodised finish, which offers fantastic protection against corrosion during wet riding conditions. Fox Suspension has also kitted out this version with Boost axle spacing, making it ideal for modern enduro racing as it delivers additional stiffness as you dominate your way from the top of the mountain to the bottom. To top it off, it comes complete with a lightweight Float EVOL air spring and a GRIP2 damper with dual Variable Valve Control (VVC) for a wide range of tuneability. Packing the same revolutionary feature set as the 36 model, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time. GRIP2 Damper with Dual Variable Valve Control (VVC) Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Enduro Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Performance Elite Series: Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions instead of Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever-operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. Manufacturer's Part Numbers: 910-21-030 Black 27.5" QR110 170mm 44mm 910-21-023 Black 29" QR110 170mm 44mm
This MTB fork features a tough alloy upper stanchion construction, which makes it more than capable of handling all the abuse that's associated with all-day epics in the mountains. DVO has also gone a step further with this model by also equipping it with magnesium lower stanchions, which give you an exceptional strength to weight ratio. This means you'll benefit from its excellent strength, without worrying about adding any unnecessary weight to your mountain bike. The little brother to the Onyx DC, this is the Onyx SC D1. At 180mm of travel, this is our top of the line enduro race fork. Featuring the proven D1 damper, high/low speed compression, rebound, and externally adjustable OTT. With 36mm stanchions and our stiffest chassis yet, charge hard into the roughest sections with confidence. Six clicks of low speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid settings for everything in between. Over thirty clicks of High Speed Compression give precise control for support on big hits. Shim stack controlled rebound that is 100% dynamic. meaning, the rebound is controlled based on the speed at which oil flows through the system. The fork will react to what you throw at it and be ready for what’s next. Our industry exclusive OTT feature really sets DVO product apart from anything else. It allows you to perfectly fine tune how the initial stroke feels without any mid/end stoke compromise. You really do the best of both worlds. Combining the stiff chassis characteristics with our exclusive features and damping design give our forks a unique ride feel unlike anything else on the market.
Loaded with nutritional goodness, Carb Killa Bars deliver on performance. With each bar providing over 20 grams of pure protein, taking your performance to the next level while limiting refined sugars and unnecessary pre or post workout calories. The perfect snack for a high protein diet, each Carb Killa® bar has been baked for exceptional taste, maximising crunch and soft texture to hit any chocolate craving unlike many bars on the market that leave you feeling dissatisfied. Research The nutritional benefits of protein are widely known with its macro nutrient properties and in consuming a low carb, high protein diet research shows a clear reduction in body fat with improvement in muscular body composition. Ideal for those; on a low carb diet and avoiding sugar and processed carbs, those wanting to gain lean muscle mass with a high protein, low carb snack, or those on a serious mass gain “bulking” diet, supplementing with other high carb mass gain foods/supplements. HOW TO USE Can be eaten any time of the day - from a delicious snack between meals, to a post workout treat that is high in protein and low in sugar!
This Dissent Shock Bolt Kit is for use with the 2020-2022 Nukeproof Dissent frame. Genuine replacement parts.
These BMX cranks feature a hard-wearing 4130 CrMo steel construction, which makes them perfect at handling all the abuse that comes with nailing your favourite tricks. Their extra-strong 3-piece design and sturdy 19mm CrMo steel spindle makes them ideal for riders who want stronger and more dependable cranks. Includes all necessary fitting hardware.
This value for money tyre is an excellent option for jumps, transfers and vert riding. Providing exceptional grip and traction while maintaining speed thanks to its superb rolling efficiency. Featuring a wide 2.4" casing for ground-hugging, shock absorbing performance in all riding conditions, regardless of how aggressive your style is.
Allowing you to customise the way you ride, the Generation XL BMX Rim offers a low profile design with 36 spoke holes and double skin for added strength.
A smooth 2.5-finger design offers functionality with an understated look. Its alloy body and cover provide superb durability for this cost-effective Generation Brake Lever.
Ready for fast-paced trail adventures, the Marzocchi Bomber Z2 fork features a rock-solid aluminium upper tube construction. This allows it to handle all the knocks and bumps as you weave from trail to trail at speed. Built for the long haul, its hard-wearing design makes it more than capable of withstanding the challenges that come with all-day epics in the mountains. Mountain Bike Fork with Rail Sweep Adjust Damper Designed for versatility, this trail-ready fork is kitted out with a Rail Sweep Adjust damper. This means you'll enjoy its full-compression and rebound damping from its dynamic, shim stack design. Its mid and high-speed rebound circuit also provides greater control with superior bump recovery. As a result, the Marzocchi Bomber Z2 boost fork won't pack down during fast and deep hits as you blast across the mountain with precision. One final highlight is its adjustability allows you to tweak its compression, to suit your riding style, personal preferences and the terrain conditions for a more rider-tuned feel. EVOL Air Spring All set for the wildest of mountain bike rides, this MTB fork is equipped with an EVOL air spring. It works by increasing negative air spring volume to specifically provide optimum small bump sensitivity. This means you'll enjoy its smooth performance as you pedal over the rock gardens, tree roots and debris with momentum. This is the ultimate choice of upgrade for riders who want outstanding front-end suspension on the toughest of mountain bike trails.
Bike commuting is a great way to beat the traffic and keep fit and healthy without having to head to the gym after work. But, of course, there are the darker mornings and evenings plus the weather to contend with. And this is where the waterproof and highly visible Nightvision Nevis Men's Jacket wins out. Should the day dawn wet, then the waterproof construction, rated to 10000mm, keeps you dry once you're on your way. And just as vital, excellent breathability, again with a 10K rating, ensures you arrive at your destination feeling fresh and dry inside, with minimal sweat build-up to cause discomfort. Then there's the visibility. Altura applies plenty of reflective details, catching the eye as they're illuminated under streetlamps and vehicle headlights. This ensures you'll be easy to see on darker morning and evening commutes/rides. A relaxed fit gives plenty of space for your normal attire underneath or a thermal cycling jersey if you need extra winter warmth.
Bike commuting is a great way to beat the traffic and keep you fit and healthy without having to head to the gym after work. But, of course, there's the darker mornings and evenings plus the weather to contend with. And this is where the waterproof and highly visible Women's Nightvision Nevis Jacket wins out. Should the day dawn wet, then the waterproof construction, rated to 10000mm, keeps you dry once you're on your way. And just as vital, excellent breathability, again with a 10K rating, ensures you arrive at your destination feeling fresh and dry inside, with minimal sweat build-up to cause discomfort. Then there's the visibility. Altura applies plenty of reflective details, catching the eye as they're illuminated under streetlamps and vehicle headlights. This ensures you'll be easy to see on darker morning and evening commutes/rides. A relaxed fit gives plenty of space for your normal attire underneath or a thermal cycling jersey if you need extra winter warmth.