Fox Suspension 36 Float NA2 Rebuild Seal KitReducing friction and improving the overall performance of your Fox 36 Float NA2 air spring, this pack of seals is the perfect spare or replacement kit for front suspension maintenance. Easy to install, this durable seal prevents moisture getting into your tubes and enhances the longevity of your forks. Features: Compatibility: Fox 36 Float NA2 Manufacturer: Genuine Fox seal kitManufacturer Part Numbers: Black n/a n/a: 803-01-226Buy Fox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fenwicks Professional Bike Chain Lube (100ml)Ideal for cyclists who do big mileage rides on their road bikes, Fenwicks has created a revolutionary blend for its Professional Bike Chain Lube that adds a protective, performance-enhancing film on your chain. It’s quick-drying and will keep assisting smooth operation and gear shifts long after many other lubes would begin to wear off. Fenwick also designed it to be easily removed with its range of degreaser solutions.Following several years of research, Fenwick’s Stealth chain lubes have become real game changers in the areas of all-weather high-stress endurance riding and racing.Features: Bottle Size: 100ml Super-smooth lubrication through deep penetration of chain and linkage components Heightened lubrication to reduce component fatigue, heat generation and chain stretch Specific cushioning additives for an extremely quiet ride, mile after mile Unique air-curing formula, forming a resilient bonded film on all internal & external surfaces Enhanced corrosion protection Buy Fenwicks Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Simple Tension SeekerChange your bike from gears to a single speed, all thanks to the Simple Tension Seeker from DMR. Suitable for Street Dirt Jumping and Trials, this handy tool tensions the chain after being clamped in place.Designed to run with a geared chain, this limits the cost of going single speed on your existing geared mountain bike, remove your shifters and mechs, fit the STS behind your quick release (please note not for nutted axles) and you're ready to ride. Features:Use: Mountain Bike (MTB)Weight: 103gBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bike Shield Half Pack Frame Protection SetThe Half Pack Frame Protection Set from Bike Shield protects your bike from scratches, scrapes, grit and stones. It offers clear advantages over other products and provides exceptional invisible protection for bike frames.Offering ultra-tough protection and self-healing properties when cut, these easy to apply patches can be removed by hand. They leave no sticky residue and are invisible on the bike. Also, they will not yellow with age.Features: Includes: 1 Tube Shield - 10 x 50cm 1 Stay Shield 2 Cable Shields - 2 x 3cm Ultra-tough protection Self-healing when cut Easy to apply or remove by hand Leaves no sticky residue Invisible on the bike Will not yellow with age Long-lastingBuy Bike Shield Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Compressport R2V2 Calf Guards deliver the ultimate in streamlined, 360-degree compression to your calves and ankles. The guards reduce muscle vibration and help you to maintain speed and intensity for longer while helping to decrease the risk of injury and cramps. Utilising a 3D waved knit technology also provides extra protection to the ankle and Achilles tendon. Care Instructions Hand wash normally. Do not bleach. Do not tumble dry. Do not iron. Do not dry clean.
Each set contains the vital equipment, including high-quality brake fluid, needed to bleed your brakes and keep them in perfect working order so you can push harder on the trails. Features: Compatibility: Avid, Formula & SRAM (Pre 2017) Liqui Moly brake fluid 250ml DOT 5.1 2 Becton and Dickinson 20ml Luer Lock syringes with long lasting pistons M5 brass fittings precision made on Citizen Swiss Lathe CNC machine Quality tight fit German made o-rings Custom drawn BASF Elastollan PU tube Bartec clamps with wider anatomic grip Luer Lock fittings made by Injectech USA Universal Bleed block for two and four piston brakes Spare o-rings Instruction manuals
It converts geared bikes to single speed and bolts into most vertical dropouts in minutes, tensioning the chain is simple, the STS is then securely clamped in place. Designed to run with a geared chain, this limits the cost of going single speed on your existing geared mountain bike, remove your shifters and mechs, fit the STS behind your quick release (please note not for nutted axles) and your ready to ride. If you wish to use a specific single speed chain - then please consider the Tension Seeker 2 as it will work with either chain type. The STS is now available as a combo kit with the Single Speed Spacer kit.
This cable is developed to connect Bosch Powerpack rack batteries. Genuine Bosch replacement part. Compatible Bosch Drive Units: Active Line Plus (BDU3XX) Active Line (BDU3XX) Performance Line Speed (BDU4XX) Performance Line (BDU3XX) Cargo Line / Speed (BDU4XX) Active Line (BDU2XX) Performance Line CX (BDU2XX) Performance Line (BDU2XX) Manufacturer's Part Numbers: 1270015367 Black 1100mm 1270015079 Black 820mm
Hope Pro 2 Conversion Kit (9mm Quick Release)Simple to fit with no tools required, these 9mm Quick Release (QR) end caps adapt Hope’s Pro 2, Pro 2 Evo and Pro 4 front and rear hubs to suits 9mm skewers. This design enables compatibility with forks and frames with standard QR dropouts, but uses the thicker 9mm skewer type (such as a DT Swiss RWS skewer) to give your bike a stiffer front or back end.Features:Compatibility: Hope Pro 2, Pro 2 Evo, Pro 4Included: Pack of two end capsConverts 15mm or 20mm hubs to 9mm QRFront or rear hub useManufacturer's Part Number: HUB443Please Note: These end caps are not compatible with standard 5mm quick release (QR) skewers. A 9mm thick skewer is required (sold separately) such as the DT Swiss RWS model. If you wish to use a standard QR skewer, please see the Hope QR conversion kits on our site.Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Joe's No Flats XC Narrow Tubeless Conversion KitJoe's No Flats XC Narrow Tubeless Conversion KitFits NARROW XC and CX rims, 26" and 29" 15-17mm inner rim width. Color coded WHITE.Joe's Tubeless Rim Strips are specifically designed to secure the tire inside the rim, with no loss of air from the rim. Weight 45 grams per strip including valve. Fits rims with FRENCH/PRESTA valve hole openings. This kit contains all you need to convert two 26" or 29" standard mountain rims and tires to tubeless and keep you riding tubeless for years.Features: 240 ml Joe's Super Sealant, with micro-sealing particles. 2 High quality rubber tubeless strips with integrated presta valves with removable cores. 1 Presta valve adaptor, for easy inflation. 1 Spare presta valve core. 1 Roll nylon rim tape for 2 wheels.Compatible with Inner Rims Width: 26" - 15-17mm 29" - 15-17mmBuy Joe's No Flats Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeShield keeps your bike in mint condition by protecting it from scratches, grit and stones. It offers clear advantages over other products which aim to provide invisible protection for bike frames thanks a number of clever design features. Ultra-tough protection for bicycle frameEasy to apply or remove by hand and leaves no sticky residueInvisible on the bikeLong lasting and will not yellow with ageIncludes two cut to size rectangle shieldsOn the bike it is invisible and you can simply peel it off and your bike looks like new! This Tube Shield Protection is perfect for the larger tubes on your bike, such as the seat tube, down tube and top tube, protecting them from potential damage. The shield is ultra-tough, will not yellow with age and is long-lasting, giving your bike years of worry free protection. The shield is easy to apply or remove by hand and once removed, leaves no sticky residue on the bike. If you want to protect your bike from numerous types of damage, BikeShield have got you covered.
BikeShield keeps your bike in mint condition by protecting it from scratches, grit and stones. It offers clear advantages over other products which aim to provide invisible protection for bike frames thanks a number of clever design features. Ultra-tough protection for bicycle frameEasy to apply or remove by hand and leaves no sticky residueInvisible on the bikeLong lasting and will not yellow with ageIncludes two cut to size rectangle shieldsOn the bike it is invisible and you can simply peel it off and your bike looks like new! This Tube Shield Protection is perfect for the larger tubes on your bike, such as the seat tube, down tube and top tube, protecting them from potential damage. The shield is ultra-tough, will not yellow with age and is long-lasting, giving your bike years of worry free protection. The shield is easy to apply or remove by hand and once removed, leaves no sticky residue on the bike. If you want to protect your bike from numerous types of damage, BikeShield have got you covered.