This crank wrench will be of benefit to any profession or amatuer mechanics toolbox.
Made from a heat-treated alloy, the Park Tool cassette tool FR-5.2 allows for the removal of cones and locknuts. It has 12 splines that are approximately 23.4mm across, the one-inch base allows it to be used with a wench or a bench vice. Please Note: Always use a skewer or axle nut to hold tool firmly in place during removal and installation. The Park Tool FR-5.2 is designed for 12 spline 23.4mm diameter tool fittings - the most common tool fitting found on 7-12 speed cassette lockrings. It can also be found on some disc brake lockrings and Rock Shox® suspension fork top caps. Thin wall construction allows use without the removal of cones and locknuts.
The all new Praxis Zayante Carbon X M30 road crank is the ultimate marriage of lightness, stiffness and versatility. Up your game with its rigid carbon arms and stout 30mm spindle. And enjoy the right gearing setup for every ride with its new X-Spider for double rings or direct-mount interface for singles.Weighing a feathery 615 grams (172.5 50/34) the Zayante Carbon M30 crank has come to play and is ready to disrupt the peloton.Key Features:4 Bolt Pattern.,160/104 BCD.,48/32, 50/34, 52/36, or 53/39 chain ring choice.,M30 Aluminium Spindle.,Requires Praxis M30 BB : BSA, BB86, BB30/PF30 (30mm Drive/28mm NonDrive).,Works with Shimano™ 10/11, Campy 10/11, SRAM 10/11.,Approximate weight 610g duo ring..
Deep in the hills of Santa Cruz, cyclists are brought to their knees by a nasty, four mile, 1800 ft. climb named Alba Road. This respected ascent was the inspiration for our Alba road crank. With its shapely forged-alloy arms connected to our M30 alloy spindle, choice of smooth-shifting Praxis Works cold forged chainrings and M30 bottom brackets (required and sold separately), the Alba is ready for anything you pedal up against. The Alba M30 road bike crank can be installed in a BSA, BB86, 386EVO, BB30, PF30, T47, BBRight or older Specialized OSBB road frame.Features:TECHNOLOGY• Alloy Arms.• M30 Spindle/Bottom Bracket System.• 2x NEW LT2 X-Rings – Learn More Here• 2x LevaTime® shifting tech – Learn More Here• 1x Wave™ tooth profile rings – Learn More HereCOMPATIBILITY NOTESThe Alba M30 road crank uses our Praxis M30 spindle/BB. M30 bottom bracket versions offered : BSA, BB86/90/92, BB30, PF30, 386EVO, T47, and BBRight.Shimano - Praxis rings shift great with both Di2 and mechanical Shimano 10/11sp drivetrains. Highly suggest Shimano, KMC, or Campy chain.SRAM - Praxis rings shift great with the e-Tap and mechanical SRAM 10/11sp drivetrains. Highly suggest Shimano, KMC, or Campy chain.Campy - Praxis rings shift great with the EPS and mechanical Campy 10/11sp drivetrains. Highly suggest Shimano, KMC, or Campy chain.Specifications:• Alloy Arms | New LT2 Spider.• New LT2 X-Rings.• Steel CR bolts.• 165/170/172.5/175mm lengths.• 48/32, 50/34, 52/36t.• M30 Spindle | Requires Praxis M30 BB.• Works with 10/11sp chains.• Weight: 800g+/- (172.5mm with 50/34t).• Q-Factor: 147mm.
Named after a brutal 4 mile, 1800ft climb called Alba Road in Santa Cruz, California, the Praxis Works Alba X crankset is designed to laugh in the face of such climbs, with an excellent range of gearing options & lightweight construction all without a heavy weight price.Lightweight solid forged arms are incredibly stiff for efficient power transferM30 spindle is compatible with BSA, BB86, 386EVO, BB30, PF30, T47, BBRight & OSBB bottom bracket shells BB's sold separately10/11spd LevaTime II chainrings are cold forged for supreme shift quality & durabilityVersatile modular design can accept 2x or 1x DM chainringsLightweight at just 800g (170mm w/ 50/34T Chainrings)Where most cranksets can only be fitted with a small selection of chainrings, the Alba X is designed with versatility in mind. While equipped with 2x chainrings as standard, the direct mount design can easily be swapped out for a 1x chainring or another 2x combination in a different ratio. Praxis wants you to have control. Add in to this compatibility with pretty much any bottom bracket shell on the market when used with the appropriate bottom bracket, and you have an incredibly versatile crankset that is happy to grace lightweight carbon race bikes or tough steel gravel bikes. The crankarms themselves are solid forged, which gives them immense strength and stiffness, so you can be sure every watt of power your legs can muster isn't wasn't with flex. Despite this, the crankset is extremely light at just 800g. The M30 spindle also helps to keep weight low and stiffness high.Whereas most chainrings are stamped or machined pieces of aluminium, the Alba X's chainrings are cold forged from 7075 T6 aluminium and then hard anodized. This unique method creates chainrings that are just as light, but are much, much harder wearing and provide slicker shifting for longer. Further improving the shifting performance is Praxis Works LevaTime II Shifting Technology. LevaTime II Shifting boasts a series of synchronised ramps and strategically placed shift pins to help deliver perfecting every time. Lightweight, stiff, smooth shifting and extremely versatile, the Praxis Works Alba X crankset is perfect for riders who want maximum performance without breaking the bank.
Named after a brutal 4 mile, 1800ft climb called Alba Road in Santa Cruz, California, the Praxis Works Alba X crankset is designed to laugh in the face of such climbs, with an excellent range of gearing options & lightweight construction all without a heavy weight price.Lightweight solid forged arms are incredibly stiff for efficient power transferM30 spindle is compatible with BSA, BB86, 386EVO, BB30, PF30, T47, BBRight & OSBB bottom bracket shells BB's sold separately10/11spd LevaTime II chainrings are cold forged for supreme shift quality & durabilityVersatile modular design can accept 2x or 1x DM chainringsLightweight at just 800g (170mm w/ 50/34T Chainrings)Where most cranksets can only be fitted with a small selection of chainrings, the Alba X is designed with versatility in mind. While equipped with 2x chainrings as standard, the direct mount design can easily be swapped out for a 1x chainring or another 2x combination in a different ratio. Praxis wants you to have control. Add in to this compatibility with pretty much any bottom bracket shell on the market when used with the appropriate bottom bracket, and you have an incredibly versatile crankset that is happy to grace lightweight carbon race bikes or tough steel gravel bikes. The crankarms themselves are solid forged, which gives them immense strength and stiffness, so you can be sure every watt of power your legs can muster isn't wasn't with flex. Despite this, the crankset is extremely light at just 800g. The M30 spindle also helps to keep weight low and stiffness high.Whereas most chainrings are stamped or machined pieces of aluminium, the Alba X's chainrings are cold forged from 7075 T6 aluminium and then hard anodized. This unique method creates chainrings that are just as light, but are much, much harder wearing and provide slicker shifting for longer. Further improving the shifting performance is Praxis Works LevaTime II Shifting Technology. LevaTime II Shifting boasts a series of synchronised ramps and strategically placed shift pins to help deliver perfecting every time. Lightweight, stiff, smooth shifting and extremely versatile, the Praxis Works Alba X crankset is perfect for riders who want maximum performance without breaking the bank.
Named after a brutal 4 mile, 1800ft climb called Alba Road in Santa Cruz, California, the Praxis Works Alba X crankset is designed to laugh in the face of such climbs, with an excellent range of gearing options & lightweight construction all without a heavy weight price.Lightweight solid forged arms are incredibly stiff for efficient power transferM30 spindle is compatible with BSA, BB86, 386EVO, BB30, PF30, T47, BBRight & OSBB bottom bracket shells BB's sold separately10/11spd LevaTime II chainrings are cold forged for supreme shift quality & durabilityVersatile modular design can accept 2x or 1x DM chainringsLightweight at just 800g (170mm w/ 50/34T Chainrings)Where most cranksets can only be fitted with a small selection of chainrings, the Alba X is designed with versatility in mind. While equipped with 2x chainrings as standard, the direct mount design can easily be swapped out for a 1x chainring or another 2x combination in a different ratio. Praxis wants you to have control. Add in to this compatibility with pretty much any bottom bracket shell on the market when used with the appropriate bottom bracket, and you have an incredibly versatile crankset that is happy to grace lightweight carbon race bikes or tough steel gravel bikes. The crankarms themselves are solid forged, which gives them immense strength and stiffness, so you can be sure every watt of power your legs can muster isn't wasn't with flex. Despite this, the crankset is extremely light at just 800g. The M30 spindle also helps to keep weight low and stiffness high.Whereas most chainrings are stamped or machined pieces of aluminium, the Alba X's chainrings are cold forged from 7075 T6 aluminium and then hard anodized. This unique method creates chainrings that are just as light, but are much, much harder wearing and provide slicker shifting for longer. Further improving the shifting performance is Praxis Works LevaTime II Shifting Technology. LevaTime II Shifting boasts a series of synchronised ramps and strategically placed shift pins to help deliver perfecting every time. Lightweight, stiff, smooth shifting and extremely versatile, the Praxis Works Alba X crankset is perfect for riders who want maximum performance without breaking the bank.
Named after a brutal 4 mile, 1800ft climb called Alba Road in Santa Cruz, California, the Praxis Works Alba X crankset is designed to laugh in the face of such climbs, with an excellent range of gearing options & lightweight construction all without a heavy weight price.Lightweight solid forged arms are incredibly stiff for efficient power transferM30 spindle is compatible with BSA, BB86, 386EVO, BB30, PF30, T47, BBRight & OSBB bottom bracket shells BB's sold separately10/11spd LevaTime II chainrings are cold forged for supreme shift quality & durabilityVersatile modular design can accept 2x or 1x DM chainringsLightweight at just 800g (170mm w/ 50/34T Chainrings)Where most cranksets can only be fitted with a small selection of chainrings, the Alba X is designed with versatility in mind. While equipped with 2x chainrings as standard, the direct mount design can easily be swapped out for a 1x chainring or another 2x combination in a different ratio. Praxis wants you to have control. Add in to this compatibility with pretty much any bottom bracket shell on the market when used with the appropriate bottom bracket, and you have an incredibly versatile crankset that is happy to grace lightweight carbon race bikes or tough steel gravel bikes. The crankarms themselves are solid forged, which gives them immense strength and stiffness, so you can be sure every watt of power your legs can muster isn't wasn't with flex. Despite this, the crankset is extremely light at just 800g. The M30 spindle also helps to keep weight low and stiffness high.Whereas most chainrings are stamped or machined pieces of aluminium, the Alba X's chainrings are cold forged from 7075 T6 aluminium and then hard anodized. This unique method creates chainrings that are just as light, but are much, much harder wearing and provide slicker shifting for longer. Further improving the shifting performance is Praxis Works LevaTime II Shifting Technology. LevaTime II Shifting boasts a series of synchronised ramps and strategically placed shift pins to help deliver perfecting every time. Lightweight, stiff, smooth shifting and extremely versatile, the Praxis Works Alba X crankset is perfect for riders who want maximum performance without breaking the bank.
Named after a brutal 4 mile, 1800ft climb called Alba Road in Santa Cruz, California, the Praxis Works Alba X crankset is designed to laugh in the face of such climbs, with an excellent range of gearing options & lightweight construction all without a heavy weight price.Lightweight solid forged arms are incredibly stiff for efficient power transferM30 spindle is compatible with BSA, BB86, 386EVO, BB30, PF30, T47, BBRight & OSBB bottom bracket shells BB's sold separately10/11spd LevaTime II chainrings are cold forged for supreme shift quality & durabilityVersatile modular design can accept 2x or 1x DM chainringsLightweight at just 800g (170mm w/ 50/34T Chainrings)Where most cranksets can only be fitted with a small selection of chainrings, the Alba X is designed with versatility in mind. While equipped with 2x chainrings as standard, the direct mount design can easily be swapped out for a 1x chainring or another 2x combination in a different ratio. Praxis wants you to have control. Add in to this compatibility with pretty much any bottom bracket shell on the market when used with the appropriate bottom bracket, and you have an incredibly versatile crankset that is happy to grace lightweight carbon race bikes or tough steel gravel bikes. The crankarms themselves are solid forged, which gives them immense strength and stiffness, so you can be sure every watt of power your legs can muster isn't wasn't with flex. Despite this, the crankset is extremely light at just 800g. The M30 spindle also helps to keep weight low and stiffness high.Whereas most chainrings are stamped or machined pieces of aluminium, the Alba X's chainrings are cold forged from 7075 T6 aluminium and then hard anodized. This unique method creates chainrings that are just as light, but are much, much harder wearing and provide slicker shifting for longer. Further improving the shifting performance is Praxis Works LevaTime II Shifting Technology. LevaTime II Shifting boasts a series of synchronised ramps and strategically placed shift pins to help deliver perfecting every time. Lightweight, stiff, smooth shifting and extremely versatile, the Praxis Works Alba X crankset is perfect for riders who want maximum performance without breaking the bank.
Named after a brutal 4 mile, 1800ft climb called Alba Road in Santa Cruz, California, the Praxis Works Alba X crankset is designed to laugh in the face of such climbs, with an excellent range of gearing options & lightweight construction all without a heavy weight price.Lightweight solid forged arms are incredibly stiff for efficient power transferM30 spindle is compatible with BSA, BB86, 386EVO, BB30, PF30, T47, BBRight & OSBB bottom bracket shells BB's sold separately10/11spd LevaTime II chainrings are cold forged for supreme shift quality & durabilityVersatile modular design can accept 2x or 1x DM chainringsLightweight at just 800g (170mm w/ 50/34T Chainrings)Where most cranksets can only be fitted with a small selection of chainrings, the Alba X is designed with versatility in mind. While equipped with 2x chainrings as standard, the direct mount design can easily be swapped out for a 1x chainring or another 2x combination in a different ratio. Praxis wants you to have control. Add in to this compatibility with pretty much any bottom bracket shell on the market when used with the appropriate bottom bracket, and you have an incredibly versatile crankset that is happy to grace lightweight carbon race bikes or tough steel gravel bikes. The crankarms themselves are solid forged, which gives them immense strength and stiffness, so you can be sure every watt of power your legs can muster isn't wasn't with flex. Despite this, the crankset is extremely light at just 800g. The M30 spindle also helps to keep weight low and stiffness high.Whereas most chainrings are stamped or machined pieces of aluminium, the Alba X's chainrings are cold forged from 7075 T6 aluminium and then hard anodized. This unique method creates chainrings that are just as light, but are much, much harder wearing and provide slicker shifting for longer. Further improving the shifting performance is Praxis Works LevaTime II Shifting Technology. LevaTime II Shifting boasts a series of synchronised ramps and strategically placed shift pins to help deliver perfecting every time. Lightweight, stiff, smooth shifting and extremely versatile, the Praxis Works Alba X crankset is perfect for riders who want maximum performance without breaking the bank.
Named after a brutal 4 mile, 1800ft climb called Alba Road in Santa Cruz, California, the Praxis Works Alba X crankset is designed to laugh in the face of such climbs, with an excellent range of gearing options & lightweight construction all without a heavy weight price.Lightweight solid forged arms are incredibly stiff for efficient power transferM30 spindle is compatible with BSA, BB86, 386EVO, BB30, PF30, T47, BBRight & OSBB bottom bracket shells BB's sold separately10/11spd LevaTime II chainrings are cold forged for supreme shift quality & durabilityVersatile modular design can accept 2x or 1x DM chainringsLightweight at just 800g (170mm w/ 50/34T Chainrings)Where most cranksets can only be fitted with a small selection of chainrings, the Alba X is designed with versatility in mind. While equipped with 2x chainrings as standard, the direct mount design can easily be swapped out for a 1x chainring or another 2x combination in a different ratio. Praxis wants you to have control. Add in to this compatibility with pretty much any bottom bracket shell on the market when used with the appropriate bottom bracket, and you have an incredibly versatile crankset that is happy to grace lightweight carbon race bikes or tough steel gravel bikes. The crankarms themselves are solid forged, which gives them immense strength and stiffness, so you can be sure every watt of power your legs can muster isn't wasn't with flex. Despite this, the crankset is extremely light at just 800g. The M30 spindle also helps to keep weight low and stiffness high.Whereas most chainrings are stamped or machined pieces of aluminium, the Alba X's chainrings are cold forged from 7075 T6 aluminium and then hard anodized. This unique method creates chainrings that are just as light, but are much, much harder wearing and provide slicker shifting for longer. Further improving the shifting performance is Praxis Works LevaTime II Shifting Technology. LevaTime II Shifting boasts a series of synchronised ramps and strategically placed shift pins to help deliver perfecting every time. Lightweight, stiff, smooth shifting and extremely versatile, the Praxis Works Alba X crankset is perfect for riders who want maximum performance without breaking the bank.
Named after a brutal 4 mile, 1800ft climb called Alba Road in Santa Cruz, California, the Praxis Works Alba X crankset is designed to laugh in the face of such climbs, with an excellent range of gearing options & lightweight construction all without a heavy weight price.Lightweight solid forged arms are incredibly stiff for efficient power transferM30 spindle is compatible with BSA, BB86, 386EVO, BB30, PF30, T47, BBRight & OSBB bottom bracket shells BB's sold separately10/11spd LevaTime II chainrings are cold forged for supreme shift quality & durabilityVersatile modular design can accept 2x or 1x DM chainringsLightweight at just 800g (170mm w/ 50/34T Chainrings)Where most cranksets can only be fitted with a small selection of chainrings, the Alba X is designed with versatility in mind. While equipped with 2x chainrings as standard, the direct mount design can easily be swapped out for a 1x chainring or another 2x combination in a different ratio. Praxis wants you to have control. Add in to this compatibility with pretty much any bottom bracket shell on the market when used with the appropriate bottom bracket, and you have an incredibly versatile crankset that is happy to grace lightweight carbon race bikes or tough steel gravel bikes. The crankarms themselves are solid forged, which gives them immense strength and stiffness, so you can be sure every watt of power your legs can muster isn't wasn't with flex. Despite this, the crankset is extremely light at just 800g. The M30 spindle also helps to keep weight low and stiffness high.Whereas most chainrings are stamped or machined pieces of aluminium, the Alba X's chainrings are cold forged from 7075 T6 aluminium and then hard anodized. This unique method creates chainrings that are just as light, but are much, much harder wearing and provide slicker shifting for longer. Further improving the shifting performance is Praxis Works LevaTime II Shifting Technology. LevaTime II Shifting boasts a series of synchronised ramps and strategically placed shift pins to help deliver perfecting every time. Lightweight, stiff, smooth shifting and extremely versatile, the Praxis Works Alba X crankset is perfect for riders who want maximum performance without breaking the bank.