Effetto Mariposa TyreInvader Tubeless Tyre Insert This lightweight tubeless tyre insert has been constructed from high-density EVA, making it a durable and reliable impact absorber for riders who needed extra protection for their tyres. This pack includes two easy-to-install inserts which work in harmony with your tyre's sealant to create a perfect all-round puncture protection system.Features: Includes: 2x Tyre Inserts Rim Widths: 20-30mm (40), 25-35mm (50), 30-40mm (55) and 35-50mm (60) Weight: 53g - 92g Buy Effetto Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Effetto Mariposa TyreInvader Tubeless Tyre Insert This lightweight tubeless tyre insert has been constructed from high-density EVA, making it a durable and reliable impact absorber for riders who needed extra protection for their tyres. This pack includes two easy-to-install inserts which work in harmony with your tyre's sealant to create a perfect all-round puncture protection system.Features: Includes: 2x Tyre Inserts Rim Widths: 20-30mm (40), 25-35mm (50), 30-40mm (55) and 35-50mm (60) Weight: 53g - 92g Buy Effetto Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave. Available in several widths, to fit rims and tyres from Gravel to Plus. Premium material (high density EVA) absorbs shocks but not sealant Very light weight (starting at 53g for one 29” wheel) and high durability Can be easily adapted to common wheel diameters (26”, 27.5”, 29”) No need for specific tubeless valves Fitment 35 - 18-25mm Rim Width 40 - 20-30mm Rim Width 50 - 25-25mm Rim Width 55 - 30-40mm Rim Width 60 - 35-50mm Rim Width
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave. Available in several widths, to fit rims and tyres from Gravel to Plus. Premium material (high density EVA) absorbs shocks but not sealant Very light weight (starting at 53g for one 29” wheel) and high durability Can be easily adapted to common wheel diameters (26”, 27.5”, 29”) No need for specific tubeless valves Fitment 35 - 18-25mm Rim Width 40 - 20-30mm Rim Width 50 - 25-25mm Rim Width 55 - 30-40mm Rim Width 60 - 35-50mm Rim Width
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave. Available in several widths, to fit rims and tyres from Gravel to Plus. Premium material (high density EVA) absorbs shocks but not sealant Very light weight (starting at 53g for one 29” wheel) and high durability Can be easily adapted to common wheel diameters (26”, 27.5”, 29”) No need for specific tubeless valves Fitment 35 - 18-25mm Rim Width 40 - 20-30mm Rim Width 50 - 25-25mm Rim Width 55 - 30-40mm Rim Width 60 - 35-50mm Rim Width
Kamm/D-Shaped Seatpost Silicone InsertBracket allows fitment of your TraceR rear light to a KAMM/D-Shaped Seatpost.
Kamm/D seatpost band and wedge, this works with the the BOOST-R seat post mount.