The Dynaplug Air Tubeless Road Tyre Repair & Inflation Kit is an all in one tyre repair and reinflation solution, there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Shorter Road version designed not to bottom out when used on narrower road slicks. For MTB tyres please use our MTB Air with a longer insertion tube to get past thicker MTB treadsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, it's also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there's an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Dynaplug Air Tubeless MTB Repair & Inflation Kit is an all in one tyre repair and reinflation solution and means that there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tubeA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, its also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there s an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Dynaplug Air Tubeless MTB Repair & Inflation Kit is an all in one tyre repair and reinflation solution and means that there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tubeA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, its also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there s an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Dynaplug Air Tubeless MTB Repair & Inflation Kit is an all in one tyre repair and reinflation solution and means that there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tubeA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, its also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there s an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Dynaplug Air Tubeless MTB Repair & Inflation Kit is an all in one tyre repair and reinflation solution and means that there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tubeA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, its also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there s an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
RoadAn all in one tyre repair and reinflation solution, there is no faster way to get yourself back up and rolling than the Dynaplug Air,Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!,The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to reinflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and ride!,Shorter Road version designed not to bottom out when used on narrower road slicks. For MTB tyres please use our MTB Air with a longer insertion tube to get past thicker MTB treads,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,CO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, it-Æs also a good idea to give the Air system a try at home before you need to do it 'in the field',Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouch,In addition, there-Æs an air hose for CO2 inflation if you just need to air up through the valve stem,Made with pride in the USA using patented technology and warrantied for life under normal usage,.MTBAn all in one tyre repair and reinflation solution, there is no faster way to get yourself back up and rolling than the Dynaplug Air,Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!,The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to reinflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and ride!,Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tube,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,CO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, it-Æs also a good idea to give the Air system a try at home before you need to do it 'in the field',Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouch,In addition, there-Æs an air hose for CO2 inflation if you just need to air up through the valve stem,Made with pride in the USA using patented technology and warrantied for life under normal usage.
This handy kit contains everything you need to repair and inflate your tyres while out on the road or trail. Kit includes: Microflate mini Co2 inflator, two tyre levers, 2 16 gram threaded cartridges and a patch kit, all stored in a padded carry case which will fit perfectly into a jersey pocket or camel back. The two 16 gram threaded cartridges give enough CO2 to inflate 2 mountain bike tyres (40 PSI) or 2 road tyres (130 PSI).
Weldtite Jetvalve CO2 Tyre Inflation System The Jetvalve CO2 Inflation System from Weldtite is a compact, powerful and efficient CO2 inflator that gets your bike tyres up to optimum pressure quickly. Ideal for use with all bike tyre types and is compatible with both Presta and Schrader valves, this inflator is lightweight and versatile, and is a beneficial addition to any rider's kit bag.Fast and Efficient CO2 Tyre Inflation SystemThe trick to reducing the hassle of punctures is being prepared, so you can be riding again as quickly as possible. Jetvalve's range of innovative mounts and pods are designed to transport Jetvalve CO2 cylinders and inflators ergonomically, without impacting on the overall aesthetic of the bike Jetvalve CO2 inflators are easy to use and effective, getting you up to full pressure in seconds. Whether you ride tubeless, tubular or with inner tubes, Jetvalve is the answer when every second counts. Lightweight, Compact and Convenient CO2 for Bike TyresJetvalve is the lightweight, compact CO2 system for easy, instant inflation for both Presta and Schrader type valves. The system now includes a number of lightweight mounts and pods with silicone straps for secure fixing, designed to be mounted on seat posts and bottle cages. Features: Includes: Head, Cylinder and Sleeve Angled Head For Ease Of Use Compatible with 16g and 25g Threaded Cylinders Compatible With Presta and Schrader Valves Lightweight Robust Design Part Number: 07024Buy Weldtite Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.