The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The new Fortus 30 Single Cavity Wheels from Hope, offering a strong but lighter weight version of the Fortus 30 wheel that's designed for Trail and Enduro use.Wheels machine built and hand finished in BarnoldswickBuilt with Pro 4 32h hubs (J-bend only)Optimised rim profile suitable for 2.4 - 2.8 tyresTubeless compatible (Valve and Tape supplied)Available in 27.5 and 29 100mm and 110mm Boost front wheel options availableSpecs:32mm Tape, Valve and wipe included for Tubeless setupWelded 6061 T6 Aluminium rim with eyeletsBlack Sapim Race stainless steel double butted spokes built with silver brass nipplesFront wheels supplied with 15mm and 20mm conversionsBoost 110mm & 148mm option built with Boost specific hubPro 4 32h hubs with stainless steel sealed cartridge bearings4 Pawl ratchet system with 44 tooth engagement (8.2 deg)Hub available in Black, Silver, Blue, Orange, Purple and RedInternal width: 30mmExternal width: 35mmProfile depth: 20mmRim ERD: 27.5 - 562mm/29 - 600mmRecommended tyre width: 2.4 - 2.8 Spoke count: 32Rim only weight: 27.5 - 565g/29 - 600gWheelset weight from: 27.5 - 2085g/29 - 2195g
The new Fortus 30 Single Cavity Wheels from Hope, offering a strong but lighter weight version of the Fortus 30 wheel that's designed for Trail and Enduro use.Wheels machine built and hand finished in BarnoldswickBuilt with Pro 4 32h hubs (J-bend only)Optimised rim profile suitable for 2.4 - 2.8 tyresTubeless compatible (Valve and Tape supplied)Available in 27.5 and 29 100mm and 110mm Boost front wheel options availableSpecs:32mm Tape, Valve and wipe included for Tubeless setupWelded 6061 T6 Aluminium rim with eyeletsBlack Sapim Race stainless steel double butted spokes built with silver brass nipplesFront wheels supplied with 15mm and 20mm conversionsBoost 110mm & 148mm option built with Boost specific hubPro 4 32h hubs with stainless steel sealed cartridge bearings4 Pawl ratchet system with 44 tooth engagement (8.2 deg)Hub available in Black, Silver, Blue, Orange, Purple and RedInternal width: 30mmExternal width: 35mmProfile depth: 20mmRim ERD: 27.5 - 562mm/29 - 600mmRecommended tyre width: 2.4 - 2.8 Spoke count: 32Rim only weight: 27.5 - 565g/29 - 600gWheelset weight from: 27.5 - 2085g/29 - 2195g
The new Fortus 30 Single Cavity Wheels from Hope, offering a strong but lighter weight version of the Fortus 30 wheel that's designed for Trail and Enduro use.Wheels machine built and hand finished in BarnoldswickBuilt with Pro 4 32h hubs (J-bend only)Optimised rim profile suitable for 2.4 - 2.8 tyresTubeless compatible (Valve and Tape supplied)Available in 27.5 and 29 100mm and 110mm Boost front wheel options availableSpecs:32mm Tape, Valve and wipe included for Tubeless setupWelded 6061 T6 Aluminium rim with eyeletsBlack Sapim Race stainless steel double butted spokes built with silver brass nipplesFront wheels supplied with 15mm and 20mm conversionsBoost 110mm & 148mm option built with Boost specific hubPro 4 32h hubs with stainless steel sealed cartridge bearings4 Pawl ratchet system with 44 tooth engagement (8.2 deg)Hub available in Black, Silver, Blue, Orange, Purple and RedInternal width: 30mmExternal width: 35mmProfile depth: 20mmRim ERD: 27.5 - 562mm/29 - 600mmRecommended tyre width: 2.4 - 2.8 Spoke count: 32Rim only weight: 27.5 - 565g/29 - 600gWheelset weight from: 27.5 - 2085g/29 - 2195g
The new Fortus 30 Single Cavity Wheels from Hope, offering a strong but lighter weight version of the Fortus 30 wheel that's designed for Trail and Enduro use.Wheels machine built and hand finished in BarnoldswickBuilt with Pro 4 32h hubs (J-bend only)Optimised rim profile suitable for 2.4 - 2.8 tyresTubeless compatible (Valve and Tape supplied)Available in 27.5 and 29 100mm and 110mm Boost front wheel options availableSpecs:32mm Tape, Valve and wipe included for Tubeless setupWelded 6061 T6 Aluminium rim with eyeletsBlack Sapim Race stainless steel double butted spokes built with silver brass nipplesFront wheels supplied with 15mm and 20mm conversionsBoost 110mm & 148mm option built with Boost specific hubPro 4 32h hubs with stainless steel sealed cartridge bearings4 Pawl ratchet system with 44 tooth engagement (8.2 deg)Hub available in Black, Silver, Blue, Orange, Purple and RedInternal width: 30mmExternal width: 35mmProfile depth: 20mmRim ERD: 27.5 - 562mm/29 - 600mmRecommended tyre width: 2.4 - 2.8 Spoke count: 32Rim only weight: 27.5 - 565g/29 - 600gWheelset weight from: 27.5 - 2085g/29 - 2195g