Zipp s 303 Firecrest Tubeless Disc-brake wheel is designed for the real world a world of imperfect conditions, road surfaces, and elements where the bottom line is simple. Efficiency = speed. It s faster, lighter, and more capable over varied terrain, whether the surface is pavement in all its conditions or no pavement at all. New Zipp graphics and cosmetic identity that scream speedVersatile endurance wheel for the modern road bike with tubeless and hookless rim profileLighter Weight than its predecessor, making it nimble and fast.Tubeless Made Easy, optimised tyre bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tyre.Ultra-wide 25mm rim profile creates a better tyre interface to be fast on or off the roadNew 40mm rim depth makes a light and aero wheel in every situationNew ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagementShips with 12mm front and rear end capsCentre locking rotor interface. Lock ring is included with the wheelsXDR or SRAM/Shimano driver bodiesCampagnolo driver body sold separatelyDeeply rooted in Zipp s drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced: Wind resistance, rolling resistance, rider fatigue, weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 30mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tyre, boosting aero efficiency on the road. The wide rim stance also features less tyre deflection for reduced rolling resistance. The combination of the wider tyre, increased tyre volume, and lower tyre pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions the tyre and wheel system absorbs the shaking, not the rider. At the centre of the 303 Firecrest Tubeless Disc brake is a versatile and durable new hub, the German-engineered ZR1 DB. This hub features 66 points of engagement for quicker response. The 303 Firecrest Tubeless Disc-brake wheel is for dedicated cyclists who aspire to the latest in technology. Its competitors in races, against peers, or simply conquering personal limits. This is about becoming faster and matching your motivation to the most advanced technology.Orientation (wheels): RearSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 40mmSurface texture: ABLC SawToothBrake compatibility: Disc (Center Lock)Rim - inside width: 25mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 Disc BrakeDriver body type: SRAM/Shimano Road or SRAM XDRColor (hub): BlackAxle type (Wheels): TA 12x142Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: 6 Pawls Leaf SpringDriver body material: AluminumMax tire pressure: 73psiMax recommended rider weight: 250lbsPart Weight (g): 739Please Note: The below tyre brands have communicated to us that their tubeless models are compatible with our tubeless hookless straight side wheels. Riders wishing to use regular clincher tyres should check with the manufacturer if they are compatible with hookless rims. This is a guide and we still recommend consumers confirm compliance with their chosen tyre manufacturer: Zipp - Tangente Speed RT25, R28, and the Tangente Course G40 gravel tyreSchwalbe Rene Herse
**Please Note** The Images shown are for illustration purpose only - This bike now comes with a Rockshox Judy Silver suspension fork as per the description below and not the suntour fork seen in the images.Introducing the new Cube Analog Hardtail Mountain Bike. This great value hardtail comes with a Rockshox Judy Silver 100mm travel suspension fork with a lockout, 12-speed SRAM Eagle drivetrain and Shimano hydraulic disc brake for superb all-weather stopping power.Rockshox Judy Silver TK Coil fork with 100mm travelSRAM SX Eagle 12-Speed drivertrain provides a huge range of gearsShimano MT200 hydraulic disc brakes give superb all-weather stopping powerSchwalbe Smart Sam tyres provide low rolling resistance and grip on and off roadSize Chart:
**Please Note** The Images shown are for illustration purpose only - This bike now comes with a Rockshox Judy Silver suspension fork as per the description below and not the suntour fork seen in the images.Introducing the new Cube Analog Hardtail Mountain Bike. This great value hardtail comes with a Rockshox Judy Silver 100mm travel suspension fork with a lockout, 12-speed SRAM Eagle drivetrain and Shimano hydraulic disc brake for superb all-weather stopping power.Rockshox Judy Silver TK Coil fork with 100mm travelSRAM SX Eagle 12-Speed drivertrain provides a huge range of gearsShimano MT200 hydraulic disc brakes give superb all-weather stopping powerSchwalbe Smart Sam tyres provide low rolling resistance and grip on and off roadSize Chart:
The new DT Swiss performance carbon wheels are the ultimate racing wheelsets. They rely on DT s huge experience in manufacturing every single component of a wheel, as well as employing state of the art technology in doing so. The bespoke carbon rims are manufactured using a method developed by DT to ensure continuous carbon fibres are aligned with the forces passing through the wheel, increasing strength and stiffness in use without adding weight.DT's Spline series 240 ratchet hubs have long been a byword for reliability and low weight and the spline spoke mounting has been revised to allow improved bracing angles, improving lateral stiffness for no additional weight, a fast-engaging 36-tooth ratchet completes a premium package. For those looking to use the latest tyre tech the PRC 1400's come tubeless ready but can also be used with standard clinchers.Bespoke carbon rimsTubeless ready 18mm (Internal), 35mm (Height) carbon rimSpokes: DT Aerolite straight pullHub type: 24011 Speed Shimano/SRAM compatibleRecommended system rider weight: 110kgWeight: 658g (Front) 828g (Rear)Includes: Tubeless ready tape, Tubeless valve and DT RWS Eco Skewers, Swissstop Black Prince brake pads, Valve guard, Spacer for 10 speed cassette
DVO's Diamond was their original single-crown fork and the latest D1 version is the best one yet. With a newly designed Boost-specific chassis for the latest wheels and tyres, the Diamond Boost packs the same proven performance in a more versatile chassis.New 110x15mm Boost chassis is stiffer & stronger while improving tyre clearanceAdjustable high and low-speed compression damping with dynamic rebound adjustmentExclusive OTT adjustment allows you to fine tune the initial feeling of the stroke35mm tapered alloy stanchions provide superb steering precision and controlTapered alloy steerer tube improves stiffness and compatibilityThe Diamond has been built to offer the best of both worlds; the damping performance and control of a downhill fork with the lightweight of a trail fork. The 35mm stanchions provide a rigid, precise feel which is boosted by the wider 110x15mm Boost axle spacing. The result is a fork that goes where you point it, no matter what line you decide to take. The new chassis also has much improved tyre clearance for the latest breed of high volume trail and enduro tyres.What really sets the Diamond apart from the rest of the crowd though is the damping. The Diamond features full adjustable high and low-speed compression adjustment, with 6 clicks of low-speed compression adjustment to allow to quickly firm the fork up for climbing or open it up for descending. Complimenting this is more than 30 clicks of high-speed compression adjustment so you can really fine-tune the feel of the fork over rough terrain and dial in your preferred settings, whether that be for comfort or support and control. Returning on the latest Diamond is DVO's signature OTT adjustment, which allows you to fine tune how supple the beginning of the stroke is, without compromising the mid-end stroke as can happen on other forks. Stiff enough for the rowdiest enduro courses, yet light enough to be ridden all day, the DVO Diamond is an incredible all-rounder.
The Bora WTO 45 stands out amongst the current line-up for its extreme versatility. While certainly not the only element in an efficient wheel, the rim is certainly the largest component in the build and as a result the recipient of a great deal of attention in terms of development. The Campagnolo carbon fibre Bora WTO rims represent the maximum in terms of not only aerodynamic profile design but versatile aerodynamic design. If a wheel is to provide greater aero efficiency it must do so in real world conditions which present many variables and very few constants. Mother Nature does not create wind in a uniform manner or from the same direction. At the same time, racecourses aren’t typically straight nor do riders maintain a perfect position as if in the wind tunnel atop a trainer. With that in mind, Campagnolo engineers set about to account for all of these variables in what has come to represent perhaps the most comprehensive aerodynamic study ever performed by the company to produce wheels that are WIND TUNNEL OPTIMIZED for real world conditions. The Bora WTO 45 carbon fibre rim takes a versatile aerodynamic design and adds an even more versatile rim depth making for a wheelset that is even better poised to take on varied terrain, courses and conditions. The lower profile is even more adept at slipping through side winds and confers an even higher degree of handling when averse and variable wind conditions are at play. While most aero projects concentrate solely on the rim, the WTO project took a comprehensive look at the entire wheel, ensuring that all components in its build confer aerodynamic efficiencies to the complete unit. To complement the new standard in aero rims both the hub and the spokes were redesigned to ensure a complete aero unit. The Bora WTO 45 incorporates the same aero hubs and spokes first seen on the WTO 77 and 60mm wheels. The hubs are constructed from aluminium and follow the same design premise of the rim in that it must be aerodynamically efficient in a versatile manner. Slimmer towards the centre and growing in width towards the flanges where it connects with new 3D aero profile spokes. The efficient wheel is appreciated when out on the road, and as such must be tested, developed and conceived considering the tire with which it is built. The research into making a more efficient rim already called for a wider stance in general but the 19mm inner width provided the multiple benefit of a better performing rim design, better fit with the larger tire sizes (25 and 28mm while compatible also with 23mm) and an overall more efficient complete unit (tire + rim). The wider stance allows the tire to take on a more aerodynamic shape and as such, allows for the tire to become efficient in terms of drag as well. The 19mm inner width is uniform across all wheels of the WTO family. While boosting aero efficiency is paramount, reducing rolling resistance pays significant dividends as well. One simple way to improve rolling efficiency is to add extremely efficient bearings. The Bora WTO 45 join the Bora WTO 60 as they roll smoothly atop USB ceramic bearings. Rolling resistance is created inside the hub but the friction between the tire and the road must be overcome to create forward movement as well. Rolling resistance varies depending on the type of tire being used and as such the WTO wheel family is constructed in a way to allow the use of the two most efficient tire solutions possible. The Bora 45 WTO incorporates the carbon fibre 2-Way Fit profile in order to offer the possibility to choose between tubeless and clincher tires, with no need for additional material or conversions. The new, complete range of WTO represents not only the most efficient wheels possible in terms of aerodynamic performance and low rolling resistance but by do so while maintaining an additional focus on weight, making for an ever more efficient total structure. Lighter wheels make for faster changes in speed that require less energy to move as a result of lower rotational mass. Campagnolo carbon expertise allows for the 77mm and 60mm rim to perform its task at a lower weight than comparable rim heights from competitors. The 45mm are no different, on par or lighter than the lightest wheels of similar rim depth. The hubs, made from aerospace grade alloys and engineered to reduce every unnecessary milligram from their construction also contribute to the scant weight of the overall wheel. Whereas the 77 and 60 represent true featherweights when compared against even the lightest wheels at their rim depth, the 45 enters into a very competitive segment in terms of weight. Despite the fact that at 45mm it is set against competing wheels based on weight alone, or on weight and minimal aero efficiency…the 45 tips the scales at a scant 1.496 grams. Reducing the weight to a minimum is a feat in and of itself but doing so while maintaining Campagnolo strict standards in terms of safety and reliability makes these wheels engineering examples worthy of every accolade they receive. Safety and reliability however does not only come from sound construction but also via a heightened degree of control with which to harness the speed of the fastest wheels on the road. The rim of the WTO 45 incorporates the same AC3 braking surface as found on the WTO 77 and WTO 60 wheels. The AC3 technology confers a “best in class” braking performance and its extreme control in all conditions makes it an imperative addition to all Campagnolo carbon fibre racing wheels. The Bora name is prestigious and with a long and extremely successful past and present, it has earned its good name repeatedly. The WTO project has proven itself worthy of being associated with this long pedigree of reliable performance solutions by setting yet another standard for the cycling industry. The BORA WTO family proudly joins the elite club of Bora wheels and Campagnolo is extremely pleased to announce that this prestigious family is growing. With the Bora WTO 45 there is now an extremely efficient carbon fibre racing wheel solution for all preferences. The new standard is here and now in numbers. Its name is BORA WTO. Features: The most aerodynamic The rim design enables the maximum amount of aerodynamic penetration when the wind angle is between 12° and 19°, making it a thrust for triathlon athletes. The streamlined design of the central part of the hub decreases the frontal area of the component whilst the special design of the flanges favours airflow detachment. The 18-spoke elliptical cross section in the front result in a far superior rolling resistance of the cross sections compared to competitor wheels. The smoothest The well-known USB cup-and-cone bearing system guarantees smoothness in the ceramic bearings. The 2-Way Fit profile allows you to mount either a clincher tyre or a tubeless tyre The C19 class allows you to mount tyres from 23, 25 to 28 mm, with perfect pairing of the rim-tyre system. Choose aero... but make it Campagnolo Campagnolo's rideability remains high despite the focus on aerodynamics. The wheel structure enables reducing energy dissipation, transferring all the energy produced by the cyclist to the asphalt. Specifications: Spokes: 18 steel spokes in the front elliptical cross section Anti-rotation technology on the radial spokes Versions Two different colorways: Bright Label and Dark Label Hub: Black aluminium monolithic hub USB cup-and-cone bearing system Hub edge: 100 mm in the front Pivot material: aluminium Rim: Profile height: 60 mm Rim material: carbon Rim cross section (H x W): 60 / 26.5 mm Rim class: C19 AC3 technology on the braking rim Water Transfer graphic Tyres: Clincher Tubeless
ZIPP 202 Firecrest Carbon Clincher Rear WheelState-of-the-art materials and resins are incorporated into the Zipp 202 rim construction, which grants enhanced lateral rigidity for explosive power transfer. A 32mm rim profile reduces rotational weight to a minimum, meaning this wheel spins up to speed instantly while maintaining faster rolling speeds.SPECIFICATIONS Wheel Size700CRim Dimensions32mm Profile. 16mm InternalTubeless Compatible NoApprox. Weight740gHub188. OLD 100mm. Quick Release Axle. Shimano/SRAM 11-Speed. BlackRim TechnologyCarbon FibreWarrantyZipp limited lifetime
WH-R8170 TL carbon clincher disc brake designed to meet pro road race criteriaLightweight clincher full carbon 60 mm deep rim for improved aerodynamics, increased rigidity and excellent inertia for sprinters and TT specialists,Easy to use Center Lock rotor mount for use with disc brakes,Stainless steel butted (2.0-1.8-2.0) and bladed straight pull spokes for optimal balance and rigidity (OPTBAL),Elbow-less spokes make for a strong yet compliant wheel,High lateral rigidity is produced with a wide flange spacing,Labyrinth double-contact sealing effectively shuts out water and dirt,Alloy cone with integrated steel Borozon treated bearing races - super mirror finish reduces friction,Freehub uses direct engagement interlocking faces for quick power transfer,Cold forged, machined aluminium hub shell and oversized 7075 alloy axle keep the wheel weight to a minimum,700C clincher compatible,For 142 x 12 mm axle,11-12-speed compatible rear wheel.
Zipp 303 Firecrest Front Clincher Disc WheelTake out any terrain with confidence with the 303 Firecrest V1 Carbon Clincher DB Front Wheel from Zipp. Their carbon design is enormously durable and reliable, while Firecrest technology within the rims adds greater aero performance and sprinting stiffness in the face of intense crosswinds. Zipp’s wheels are also surprisingly lightweight, which means they’re enormously responsive and precise in their handling, fast in their acceleration and ideal for handling trickier downhill sections.Quick-release skewers mean more leverage for opening and closing, a wide brake track delivers improved braking performance and the clincher tyre keeps a stable shape without reducing rolling resistance. This is your chance to truly become one with the trail thanks to Zipp.Features:The Zipp 303 Firecrest disc brake wheel is durable, lightweight and stiff, whilst also providing the consistent and powerful performance of disc brakingDisc brake (6-bolt) specific for superior braking in all weathersLight, aero design45mm deep for class leading aerodynamicsZipp 77D disc specific hub on a carbon clincher rimFirecrest Rim Technology provides world class handling and stabilityAero performance, sprinting stiffness, stable in the crosswinds and lightweightEngineered for the Classics yet, ready for anythingThru-axle compatibleRim material: carbonRim type: clincherRim depth: 45mmRim width: 28.5mmHub (disc specific - 6-bolt): Zipp 77DSpoke count: 24Spokes: CX-Ray, blackBearings: cartridge, stainless steelMax rider weight: 250IbsMax tyre pressure: 125psiBuy Zipp Wheels from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp s 303 Firecrest Tubeless Disc-brake Front Wheel is designed for the real world a world of imperfect conditions, road surfaces, and elements where the bottom line is simple. Efficiency = speed. It s faster, lighter, and more capable over varied terrain, whether the surface is pavement in all its conditions or no pavement at all. New Zipp graphics and cosmetic identity that scream speedVersatile endurance wheel for the modern road bike with tubeless and hookless rim profileLighter Weight than its predecessor, making it nimble and fast.Tubeless Made Easy, optimised tyre bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tyre.Ultra-wide 25mm rim profile creates a better tyre interface to be fast on or off the roadNew 40mm rim depth makes a light and aero wheel in every situationNew ZR1 DB hub is engineered in Germany with better seal design for improved durabilityShips with 12mm front and rear end capsCentre locking rotor interface. Lock ring is included with the wheelsDeeply rooted in Zipp s drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced: Wind resistance, rolling resistance, rider fatigue, weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 30mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tyre, boosting aero efficiency on the road. The wide rim stance also features less tyre deflection for reduced rolling resistance. The combination of the wider tyre, increased tyre volume, and lower tyre pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions the tyre and wheel system absorbs the shaking, not the rider. At the centre of the 303 Firecrest Tubeless Disc brake is a versatile and durable new hub, the German-engineered ZR1 DB. The 303 Firecrest Tubeless Disc-brake wheel is for dedicated cyclists who aspire to the latest in technology. Its competitors in races, against peers, or simply conquering personal limits. This is about becoming faster and matching your motivation to the most advanced technology.Orientation (wheels): FrontSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 40mmSurface texture: ABLC SawToothBrake compatibility: Disc (Center Lock)Rim - inside width: 25mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 24Spoke pattern: 2 CrossHubZ: R1 Disc BrakeDriver body type: n/aColour (hub): BlackAxle type (Wheels): TA 12x100Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: n/aDriver body material: n/aMax tyre pressure: 73psiMax recommended rider weight: 250lbsPart Weight (g): 613Please Note: The below tyre brands have communicated to us that their tubeless models are compatible with our tubeless hookless straight side wheels. Riders wishing to run regular clincher tyres should check with the manufacturer if they are compatible with hookless rims. This is a guide and we still recommend consumers confirm compliance with their chosen tyre manufacturer: Zipp - Tangente Speed RT25, R28, and the Tangente Course G40 gravel tyreSchwalbe Rene Herse
The Zipp 202 Firecrest Tubeless Disc Brake Wheels harnesses high technology for high adventure. This wheel is tubeless ready for road riding that doesn t always stay on smooth pavement.New logo and graphics that scream speedFirecrest rim Technology provides world class handling and stabilityTo ensure compatibility with any bike, our versatile ZR1 hubs come with swappable end caps to work with QR s and thru-axlesTubeless ensuring secure performance even when ridden at lower tyre pressures.The Zipp 202 Firecrest Tubeless retains its 32mm rim depth for a classic feel with real aero benefits. The wheel s 21mm internal width is aerodynamically optimised for use with 28mm wide tyres. Its tubeless design lets you run lower tyre pressures for improved grip and rolling resistance without the risk of pinch flats. At the centre of the 202 Firecrest Tubeless Disc-brake is a durable and versatile new hub set. The ZR1 DB hub offers greater bearing durability and quicker engagement with a Centre locking brake interface.Orientation (wheels): RearSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 32mmSurface texture: ABLC SawToothBrake compatibility: Disc (Center Lock)Rim - inside width: 21mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-Ray - BlackSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 Disc BrakeDriver body type: SRAM/Shimano Road or SRAM XDRColour (hub): BlackAxle type (Wheels): TA 12x142Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: 6 Pawls Leaf SpringDriver body material: AluminumMax tyre pressure: 100psiMax recommended rider weight: 250lbs
Time to Step it Up All Mountain riding is all about progression–going bigger, steeper, faster. And in that spirit, the Next R carbon wheelset will be your trusted partner in progression. Dialed-in technology + design adds confidence and strength to your MTB game.