Zone3’s Front Facing Swim Drill Snorkel has a stabilised construction with a secure fit that will stay in place even at high speed. The snorkel is excellent when you’re trying to focus your training into one specific area of your technique and you want to worry less about your breathing technique.
Key Features:Made from 6061 T6 cold forged aluminium,Suitable for 1" threaded forks (22.2mm),Adjustable angle from 0° to 60°,Bar bore diameter: 25.4mm,180mm shaft length,Available lengths: 80mm 100mm and 120mm.
Key Features:Perfect for Downhill & Freeride.,Sintered pads XLC Sintered brake pads can be recognized by the gold back plate..
Key Features:Made from 6061 T6 cold forged aluminium,Suitable for 1 1/8" threaded forks (25.4mm),Adjustable angle from 0° to 60°,Bar bore diameter: 25.4mm,180mm shaft length,Available lengths: 80mm 100mm and 120mm.
Key Features:Shimano compatible, sealed,Including suitable calibration sockets ,A: 8, 9, 10, 11 times Shimano,B: 7-speed Shimano & 8-speed Campagnolo ,C: Campagnolo 9-10 times ,D: Sram 9.0 ('97 / '98), 9.0 SL ('98), 7.0 ('97 / '98 / '99).
XLab Gorilla High Grip Carbon Bottle CageThe GORILLA helps prevent bottles ejecting from cages on bumpy roads, and saddle-mounted water bottle carriers. The cage has over 2X the gripping force of conventional carbon cages due to the 6 high shouldered carbon gripping fingers, tall retention tab at the top and thicker carbon material. The GORILLA cage will fit on any standard cage mounts.Features:Tall Gripping sides for a 14lb grip on bottleStiff top lip helps retain bottlesFlared entry for fast insertionThick shelf for large bottlesMaterial: Carbon FiberWeight: 39gWarranty: Because of our engineering and testing for this product we give it a Lifetime Limited Warranty to the original owner.Warning: To ensure the best possible fit with the GORILLA Cage, use a bottle that has a groove all the way around that is uniform and fits tightly into the hook at the top of the GORILLA Cage. Bottles with shorter groves that do not fit properly into the hook like the Camelback Podium, and bottles with grooves that are not uniform around the entire circumference like the Polar Insulated bottles are not recommended for use with the XLAB GORILLA Cage, In our experience these two bottles do not stay in place on rear carriers due to the lack of a groove for the cages to grip.Buy XLab Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
XLab Gorilla High Grip Carbon Bottle CageThe GORILLA helps prevent bottles ejecting from cages on bumpy roads, and saddle-mounted water bottle carriers. The cage has over 2X the gripping force of conventional carbon cages due to the 6 high shouldered carbon gripping fingers, tall retention tab at the top and thicker carbon material. The GORILLA cage will fit on any standard cage mounts.Features:Tall Gripping sides for a 14lb grip on bottleStiff top lip helps retain bottlesFlared entry for fast insertionThick shelf for large bottlesMaterial: Carbon FiberWeight: 39gWarranty: Because of our engineering and testing for this product we give it a Lifetime Limited Warranty to the original owner.Warning: To ensure the best possible fit with the GORILLA Cage, use a bottle that has a groove all the way around that is uniform and fits tightly into the hook at the top of the GORILLA Cage. Bottles with shorter groves that do not fit properly into the hook like the Camelback Podium, and bottles with grooves that are not uniform around the entire circumference like the Polar Insulated bottles are not recommended for use with the XLAB GORILLA Cage, In our experience these two bottles do not stay in place on rear carriers due to the lack of a groove for the cages to grip.Buy XLab Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Helps prevent bottles launching from rear carriers The GORILLA CAGE helps prevent bottles ejecting from cages on bumpy roads, and saddle-mounted water bottle carriers. The cage has over 2X the gripping force of conventional carbon cages due to the 6 high shouldered carbon gripping fingers, tall retention tab at the top and thicker carbon material. The GORILLA CAGE will fit on any standard cage mounts.
The GORILLA Cage helps prevent bottles ejecting from cages on bumpy roads, and saddle-mounted water bottle carriers. The cage has over 2X the gripping force of conventional carbon cages due to the 6 high shouldered carbon gripping fingers, tall retention tab at the top and thicker carbon material. The GORILLA cage will fit on any standard cage mounts. Tall Gripping sides for a 7 lb grip on bottle Stiff top lip helps retain bottles Flared entry for fast insertion Thick shelf to support large bottles Material - Carbon Fiber Weight - 39g Warning To ensure the best possible fit with the GORILLA Cage, use a bottle that has a groove all the way around that is uniform and fits tightly into the hook at the top of the GORILLA Cage. Bottles with shorter groves that do not fit properly into the hook like the Camelback Podium, and bottles with grooves that are not uniform around the entire circumference like the Polar Insulated bottles are not recommended for use with the XLAB™ GORILLA Cage. In our experience these two bottles do not stay in place on rear carriers due to the lack of a groove for the cages to grip. About Xlab Xlab was formed due to a unique combination of recognizing new racing needs and an obsession for speed. aerospace designer craig turner entered the bicycle industry after quitting corporate america and wanting to follow his passion. he had a passion for speed. Saving been a senior design specialist for numerous military and commercial aircraft, and even rockets and racing yachts, he always wanted to make ‘vehicles’ go faster. being highly competitive, he did not want to get beaten on the hills by his training buddy, so he built super lightweight bikes under 13lbs in 1992. a feat not equaled in its day even by bike manufacturers. Still dissatisfied, he started the first mail order triathlon business in america. fifteen years later after selling over 10,000 tri-bikes, designing bikes for large manufactures, setting numerous triathlon equipment trends and cycling 3,300 miles across the us, he decided to sell the mail order business and concentrate his efforts full time on the aerodynamic design of bicycle gear. Innovating and trend setting have been roles in craig’s life. he also inspired candice to do a 500 mile bike ride at the age of 13 through the tough terrain of yellowstone and glacier national parks and the grueling icefield parkway.
When the going gets rough don't loose your bottle. Specially designed by Xlab to withstand the rigours on rear hydration systems and on mountain bikes. Key Features: Tall sides grip high up on the bottle holding it in place. Narrow opening in the centre keeps bottle in place on rough road surfaces. Long thick lower shelf prevents bottles falling through cage bottom. Thicker carbon greatly increases grip on bottles. Xlab measurements recorded 2X the grip force of other cages. Weight 38g (Manufacturer claimed). Please Note: Stocks may vary, white cages have a rolling stock change and you may receive White/Carbon or White/White.About Xlab Xlab was formed due to a unique combination of recognizing new racing needs and an obsession for speed. aerospace designer craig turner entered the bicycle industry after quitting corporate america and wanting to follow his passion. he had a passion for speed. Saving been a senior design specialist for numerous military and commercial aircraft, and even rockets and racing yachts, he always wanted to make ‘vehicles’ go faster. being highly competitive, he did not want to get beaten on the hills by his training buddy, so he built super lightweight bikes under 13lbs in 1992. a feat not equaled in its day even by bike manufacturers. Still dissatisfied, he started the first mail order triathlon business in america. fifteen years later after selling over 10,000 tri-bikes, designing bikes for large manufactures, setting numerous triathlon equipment trends and cycling 3,300 miles across the us, he decided to sell the mail order business and concentrate his efforts full time on the aerodynamic design of bicycle gear. Innovating and trend setting have been roles in craig’s life. he also inspired candice to do a 500 mile bike ride at the age of 13 through the tough terrain of yellowstone and glacier national parks and the grueling icefield parkway.
Wolf Tooth Direct Mount Roadlink Derailleur HangerEnabling you to run larger range cassettes on your road or gravel bike, this direct mount (DM) version of Wolf Tooth's RoadLink Derailleur Hanger extension works with a wide range of Shimano 11 speed rear mechanisms. It’s the ideal adaptor for changing the gearing on your bike to a 1x11 speed drivetrain setup.This gear hanger extension fits Shimano’s GRX 810 (RX810), R7000 105, R8000 and RX800 Ultegra and R9100 Dura-Ace rear derailleurs. Since it was first introduced, this award-winning model has given riders the ability to easily increase the range of their Shimano road bike drivetrains, while also maintaining near-factory levels of chain wrap and shifting operation.Like the mountain-focused GoatLink, the RoadLink DM replaces Shimano’s stock direct mount link allowing you to relocate the derailleur to provide clearance for larger-than-stock range cassettes while maintaining chain wrap and improving shifting. The result - larger gear ranges that riders want and expect for their road, commuter, gravel and touring bicycles.Features:Material: CNC machined from 6061-T6 Aluminium with stainless steel boltMount: Direct mountCompatibility: Shimano GRX 810 (RX810), 105 R7000, Ultegra R8000 and RX800 and Dura-Ace R9100 rear derailleursFits standard derailleur hangers onlyOptimised for use with 11-36T, 11-40T, and 11-42T 11-Speed cassettesOptimised for use with GRX ultra-wide range drivetrains when using the GRX 810 (RX810) rear derailleurImproves performance with 10-42T 11-Speed cassettes, but not to factory levelsDoes not change the derailleurs total chain wrap capacityMade in the USAManufacturer’s Part Number: WTROADLINK-DMWeight: 20gPlease Note: Direct mount derailleur hangers are not supported. These are not common and the stock B-Link that the RoadLink DM replaces will not be present on bikes with a direct mount derailleur hanger.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Roadlink Derailleur HangerCreated by Wolftooth to increase the gearing capacity of your road or gravel bike, the Roadlink Derailleur Hanger changes the position of your rear mechanism so it can work with larger mountain bike (MTB) cassettes. An ideal component for changing to a 1x drivetrain, it works with Shimano 10 and 11 speed derailleurs.If you're looking for the simplicity of a single chainring up front or even just want lower bail-out gears on your double without changing your existing groupset or losing shifting performance and chain wrap, then the RoadLink is for you. The RoadLink is optimised for use with 10 or 11 speed 11-36T and 11-40T cassettes, Shimano road derailleurs and is best paired with Wolf Tooth's 40-tooth GC cassette extenders and Drop-Stop chainrings. The RoadLink specifically designed for the 10 and 11 speed Shimano road derailleur geometry. It also works very well with 9-speed road groups, all SRAM groups and Campagnolo derailleurs with cassettes up to 11-36T.Features: Material: 6061 Aluminium Included: Stainless Steel bolt Torque: 8-10Nm Speed: 10 and 11-Speed Use: Road, Gravel, cyclocross (CX) Direct Mount-native frames are not supported Triple chainrings are not supported Double chainrings are only supported with GS (medium cage) rear derailleurs. You may need to change the front gearing so the capacity of the rear derailleur is not exceeded Made in the USA Manufacturer's Part Number: WTRLINK Weight: 17g10-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainrings sure to not exceed the derailleur's capacity) 11-42T: Not supported11-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-42T: Not supported 10-42T: Not supportedPlease Note: Due to the lack of a clutch mechanism on Shimano road derailleurs, secondary chain retention (front derailleur or chain device) may be needed, especially for rough or off-road use. Please Also Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment and suspension configuration, individual results will vary. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.