As temperatures fall away to single digits and you can see you're breath in the air, that's the time to pull on the Women's Graphics PRR Fiori Bib Tights. The SuperRoubaix fabric has an internal surface brushed to create loft and generate an insulating layer of air pockets to keep the cold outside. And not just that it's highly breathable, a vital characteristic so you don't get chills from sweat build-up. Light compression also supports the muscles when you're pedalling. The upper bib section is made with Eyelet carbon. This advanced perforated fabric is extremely breathable and features carbon yarns. The carbon yarns dissipate electrostatic charges for greater comfort and also have antibacterial properties to keep odours at bay. With flatlock stitching throughout you'll also enjoy a smooth and comfortable fit. Women's W4HF Seat Pad Inside the tights is Ale's renowned W4HF seat pad with a women's specific design offering luxurious comfort for all your rides. It's constructed from elastic micro-fibre with padding strategically positioned in the contact points and features a central relief channel to avoid stress on nerve endings. For the best comfort and support high-density 8mm deep 90 kg/cm2 padding is used where it's most needed in the ischiadic and perineal zones. This pad gives the very best combination of comfort, wicking, breathability and is also incredibly fast drying to ensure the utmost comfort on the saddle.
Alé Women's Graphics PRR Fiori Bib TightsKeep your motivation high for outdoors cycling with the cosy warmth of the Alé Women's Graphics PRR Fiori Bib Tights. When winter arrives, there's nothing better for keeping you pedalling in comfort. As temperatures fall away to single digits and you can see you're breath in the air, that's the time to pull on the Women's Graphics PRR Fiori Bib Tights. The SuperRoubaix fabric has an internal surface brushed to create loft and generate an insulating layer of air pockets to keep the cold outside. And not just that it's highly breathable, a vital characteristic so you don't get chills from sweat build-up. Light compression also supports the muscles when you're pedalling.The upper bib section is made with Eyelet carbon. This advanced perforated fabric is extremely breathable and features carbon yarns. The carbon yarns dissipate electrostatic charges for greater comfort and also have antibacterial properties to keep odours at bay. With flatlock stitching throughout you'll also enjoy a smooth and comfortable fit.Women's W4HF Seat PadInside the tights is Ale's renowned W4HF seat pad with a women's specific design offering luxurious comfort for all your rides. It's constructed from elastic micro-fibre with padding strategically positioned in the contact points and features a central relief channel to avoid stress on nerve endings. For the best comfort and support high-density 8mm deep 90 kg/cm2 padding is used where it's most needed in the ischiadic and perineal zones. This pad gives the very best combination of comfort, wicking, breathability and is also incredibly fast drying to ensure the utmost comfort on the saddle.Features:Materials: 85% Polyamide, 15% ElastaneElastic bibs with breathable carbon insertReflective details for visibilityFlatlock stitchingsW4HF seat padInsulation 3/5 - Wind Protection 1/5 - Breathability 4/5Suggested temperature range: 4 to 10 degrees C +Buy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Magura Light Action Remote Dropper LeverThis Light Action dropper seatpost lever is engineered to solve common dropper remote problems with its ergonomic, compact and sturdy design. This Light Action version aims to solve common dropper remote complaints with its compact, ergonomic and sturdy design. The ReMote Light Action Dropper Lever has a longer lever arm than the standard ReMote, reducing the actuation force required by a third and making it ideal for dropper posts with a harder pull or if you prefer a light actuation feel. This dropper seatpost lever is another option in Wolf Tooth's industry-leading ReMote line of dropper remotes. Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.Sealed Cartridge BearingIn an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with a captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Lightweight with Hassle-free InstallationWolf Tooth's team has also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice for those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to the engineered failure point, the lightweight ReMote leads in every category.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Clamp Type: Magura Clamp Included: Yes Ergonomic Easy to Install Sealed cartridge bearings Textured lever Made in USATechnologies: UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Number: WTREMOTELAMAGURABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
A lightweight short-sleeved jacket with a wind- and light rain-resistant fabric on the front and a highly breathable fabric on the back. Versatile and ready for a wide range of conditions depending on the base layer you use with it. WHO IS IT FOR? For those looking for the perfect garment for racing or training when the temperatures are mild but it’s raining steadily. To not sacrifice aerodynamics and to put themselves in the best position to perform at their best. It was on the Flemish walls that this garment was tested and retested by highly experienced cyclists and by the pros themselves. In this new version, Fiandre Light retains its front protection and resistance to light rain. The bottom in the back is longer for more rain coverage and a more comfortable fit. The construction of the collar has also been improved with greater attention to the shape. NoRain technology allows sweat to escape without allowing rain in. If it’s perfect for Flanders, this garment has no limits. WHY YOU WILL LOVE IT? If, like us, you enjoy riding in the summer rain or love spring and fall rides, the Fiandre Light is the lightweight water-repellent and windproof jersey you’re looking for. PRODUCT FEATURES Stretch windproof fabric on front and shoulders New, improved pattern for bottom of jacket in back and for collar Lightweight and stretchy NoRain Light fabric on back to repel light rain Full-length front YKK® Vislon® zip, 3 back pockets and reflective heat-transfer strips
The Entrata Bibtight draws on thousands of hours of riding and product development by Castelli and focusses on the essential elements of performance to carry you through winter. The tight is ideal for training, riding, and even commuting in cool dry conditions. It is made from Castellis Thermoflex fabric, which was a breakthrough in cool weather lycra when it was first released. The fabric offers superb warmth due to the loft on the inside that traps just the right amount of air against the skin to keep your temperature regulated. The high stretch of the fabric paired with the Entratas reduced seamed patterning keep comfort levels high. Castellis Kiss Air2 seat pad offers just the right amount of padding whilst maintaining great moisture management properties. Favoured by many of the pros, it is slightly less voluminous than the Progetto X2. Key Features Thermoflex fabric for warmth and comfort Mesh bib straps Ankle zippers for easy on and off Reflective logo below knee Reflective flap over ankle zipper for extra visibility Kiss Air2 seat pad. The choice of some of Castellis pro riders 6 14C / 43 57F Weight: 225g (Large)
A lightweight short-sleeved jacket with a wind- and light rain-resistant fabric on the front and a highly breathable fabric on the back. Versatile and ready for a wide range of conditions depending on the base layer you use with it. WHO IS IT FOR? For those looking for the perfect garment for racing or training when the temperatures are mild but it’s raining steadily. To not sacrifice aerodynamics and to put themselves in the best position to perform at their best. It was on the Flemish walls that this garment was tested and retested by highly experienced cyclists and by the pros themselves. In this new version, Fiandre Light retains its front protection and resistance to light rain. The bottom in the back is longer for more rain coverage and a more comfortable fit. The construction of the collar has also been improved with greater attention to the shape. NoRain technology allows sweat to escape without allowing rain in. If it’s perfect for Flanders, this garment has no limits. WHY YOU WILL LOVE IT? If, like us, you enjoy riding in the summer rain or love spring and fall rides, the Fiandre Light is the lightweight water-repellent and windproof jersey you’re looking for. PRODUCT FEATURES Stretch windproof fabric on front and shoulders New, improved pattern for bottom of jacket in back and for collar Lightweight and stretchy NoRain Light fabric on back to repel light rain Full-length front YKK® Vislon® zip, 3 back pockets and reflective heat-transfer strips
FRONT. The Lezyne Zecto Drive is a low profile high visibility light with three ultra bright LEDs. Low profile high visibility light with three ultra bright LEDs. The Lezyne Zecto Drive front light delivers up to 250 lumens and seven output options. Lightweight and durable composite matrix body with machine aluminium faceplate. Intelligent Power Indicator displays battery life and provides side visibility. Convenient Micro-USB rechargeable design. Patented versatile 2-in-1 Clip-On System straps to bars or clips to loops. Available in pairs. MAX LUMENS: 250WEIGHT: 47gRECHARGE TIME: 2.5hrs (1A) / N/A (2A) REAR. The Lezyne Zecto Drive taillight is a low profile high visibility light with three ultra bright LEDs. Low profile high visibility light with three ultra bright LEDs. The Zecto Drive rear light provides up to 80 lumens and six output options including a super-visible Daytime Flash mode. Lightweight and durable composite matrix body with machine aluminium faceplate. Intelligent Power Indicator displays battery life and provides side visibility. Convenient Micro-USB rechargeable design. Patented versatile 2-in-1 Clip-On System straps to bars or clips to loops. Available in pairs. MAX LUMENS: 80WEIGHT: 47gRECHARGE TIME: 2.5hrs (1A) / N/A (2A)
An open and aggressive tread design gives the High Roller II excellent soil penetration and mud-clearing ability. A square profile provides a solid consistent feel across the knobs. Modified knobs on the shoulder and centre improve braking performance and traction on hard surfaces. An excellent choice for technical freeride terrain. Open tread design Improved braking and traction Specification Conditions: Loose Over Hard Loose Medium Wet Cornering Control: 1 2 3 4 Rolling Efficiency: 1 2 3 4 TPI: 60 Bead: Foldable Ply Construction: Single Compound: 3C Maxx Terra Max PSI: 60 Tech: Tubeless Ready EXO Technology 3C Maxx Terra: An intermediate compound configuration used in select mountain tyres. 3C Maxx Terra is softer and offers more traction than 3C Maxx Speed yet provides better treadwear and less rolling resistance than Maxx Grip. Tubeless Ready: Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Our TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtight EXO: An extremely cut-resistant and abrasion-resistant material added to the sidewalls of select mountain tyres. This densely woven fabric is also lightweight and highly flexible ensuring that the performance of the tyre remains unaffected. Choose EXO Protection for exceptionally rocky treacherous trails where the chance of sidewall cuts and abrasions is high.
Recommended Use Designed for those cooler times in the summer months, these knicks work perfectly with all Assos products in this climaRange. Paired with a spring/autumn skinFoil, these knicks are also ideal for cooler days when full-length tights are just too hot. Used next to your skin, these give you S7 generation comfort in female-specific knicks. Technological Engineering The improved design on the lower leg optimizes the fit, giving more comfort and better performance. And making them with their type.439 material Assos brings them to a new level of overall comfort. The type.439 material offers slightly more compression than previous models offering enhanced muscle support, helping you to ride further and faster before fatigue sets in. The women's S7 pad, which takes the innovations of the T.équipe_S7 insert for men, has been revised specifically for the female anatomy.
Lezyne Micro Drive 500 eBike Front LightA 500 lumen multi-purpose e-bike light with excellent side visibility and versatile mounting options.E-BikeLezyne’s Ebike Micro Drive 500 is powered by your E-bike’s battery and is compatible with 6-12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. The light is manually installed and may require some disassembly of the bike and motor depending on make and model-battery type.Rugged DesignThe light comes with a rugged CNC machined aluminium construction for ultra-durable protection against anything the road throws at you. The light’s body construction also provides intelligent thermal management which stops LEDs from overheating after long term use.MOR LensFor excellent side visibility the Micro Drive comes with Lezyne’s enhanced Maximum Optical Reflection lens which spreads the beam and helps you stay seen from multiple angles.MountingEnsuring a rugged and stabilised mount the light comes with an adjustable CNC fork mount which can be height adjusted and comes with various mounting position options.Features500 lumens maximum light outputTwo ultrahigh-output LEDsEnhanced MOR lensBuilt-in side visibilityAuto Day/Night dim modeCNC machined aluminium constructionE-bike compatible 6-12v input, 6wEasily plugs into batteries from top makersCompatible with Bosch, Shimano and YamahaIncludes CNC fork mountAlso comes with 140cm long power cableDimensions: 44.5mm x 41mm x 25mmBuy Lezyne Lights from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Lezyne Macro Drive 1000 e-Bike Front Light is a high-performance e-bike cycling light.Ultra-high output LEDs producing up to 1000 lumensDurable and heat-dissipating designEnhanced Maximum Optical Reflection (MOR) lens provides incredible visibilityExtra secure mounting options keep your bar tidyThe CNC machined aluminium construction is incredibly durable and also heat-dissipating. The Macro Drive 1000 features two ultra-high output LEDs that deliver up to 1,000 lumens and an Intelligent Auto Day/Night dim mode. The enhanced MOR (Maximum Optical Reflection) lens provides fantastic built-in side visibility.As well as an aluminium CNC fork mount there s an extra secure Direct X-Lock mounting system. This mounts onto the face plate of a stem for improved aerodynamics whilst also keeping your bar tidier. The Macro Drive 1000 has an e-bike compatible 6 12v input which easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. There s also a 50cm long power cable.
Powerful, lightweight helmet-mounted bicycle light from Lezyne with up to 1000 lumens of output. It s constructed from CNC-machined aluminium with built-in cooling fins providing optimal heat management and durability. GoPro-style mounting interface and a versatile Velcro mounting strapMicro-USB rechargeableAdvanced programming offers eight output modesCustom MOR (Maximum Optical Reflection) lens along with side visibilityMax Lumens: 1000 lumensMax Runtime: 87 hoursRecharge Time: 4 hoursWeight: 153gColour: BlackWith a GoPro-style mounting interface and a versatile Velcro mounting strap with a Composite Matrix base, the Helmet Lite Drive 1000XL is a low-profile LED that follows the user s line-of-sight for superior visibility and excellent night riding capabilities. The light is Micro-USB rechargeable, providing up to 87 hours of runtime. Advanced programming offers eight output modes, including a highly disruptive Daytime Flash mode, which are further enhanced by our custom MOR (Maximum Optical Reflection) lens along with side visibility.